Friday, September 7, 2007
New Academy 2WD Buggy GV2 새로운 아카데미 륜 구동 버기 gv2 Categories - Academy, Brand, Electric Off Road, Cars, Products , trackback
Model Rectifier Corporation are to release their new Academy GV2 Pro buggy this month. 모델을 정류 주식 회사가 그들의 새로운 아카데미 gv2 직업적인 버그가 이번 달에 출시합니다. The car was displayed last weekend in Vineland NJ at the “Trinity East Coast Champs” and can been seen in these pictures posted on rctech.net. 지난 주말에 차량이 표시됩니다 뉴저지에서 그 밖의 "삼위 일체 동해안 샹"와 rctech.net에 게재된이 사진을 볼 수있습니다되었습니다. The buggy which arrived at the MRC headquarters just hours before the race was not raced due to its late arrival. the 버그를 본부에 도착한 지 불과 몇 시간 (MRC로 인해 이전에 경주의 경주는 늦게 도착합니다.
Click here for a full spec of the new 1:10 2WD EP Buggy… 여기를 클릭하십시오 륜 구동에 대한 자세한 사양의 새로운 1:10 ep 버그가…
- Threaded shocks with bladders that can be flipped upside down for a more - 스레드 충격을 거꾸로과 방광을 상실 수있는 좀 더
conventional emulsion type shock feel 전통적인 느낌 에멀젼 타입 쇼크
- No e-clips (captured hingepins) - 아니 이메일 - 클립 (캡처 hingepins)
- 27.5 kick-up with bellcrank matching the same angle - 27.5 킥 - bellcrank과 일치하는 동일한 각도에
- Vertical ball studs on the front and rear bulkheads - 수직 공을 차단 벽의 전면과 후면에 압정
- Rear axle will accept the ACADEMY hex rear rim, along with “MOST” other pin drive rims - 뒤쪽 차축은 16 진수 뒷면에 동의하면 아카데미 림과 함께 "대부분의"기타 핀 드라이브에 바퀴
- Front axle will accept the ACADEMY metric front bearing/rim, but there will be an additionaL ASE sized axle included to that Team Associated B4 front rims, and Proline B4 rims can be used as well - 프론트 차축은 아카데미에 동의하면 통계가 전면 베어링 / 림했지만 거기에 추가 +82-2-3456-0319 크기의 차축이 연결된 b4 앞 바퀴 팀을 포함, 그리고 프롤린 b4 바퀴도 사용할 수있습니다
- Aluminum hingepin blocks have plastic balls that snap into them so that there is not excess force applied to the aluminum when changing antisquat / toe-in - 알루미늄 hingepin 블록은 플라스틱으로 볼 수 있도록하는 스냅에 적용되는가 알루미늄이없습니다 변경할 때 과도한 힘을 antisquat / 발가락 -에
- Steel outdrives with Over Sized rings, that makes for a longer lasting diff - 철강 outdrives 넘는 크기의 고리, 그것을 더 이상 지속적인 차등을
- Gear cover that is virtually air tight, gear cover plug is tethered to the gear cover so that you dont lose it - 기어 커버가 거의 완벽한, 기어 커버 플러그가 닿는 곳에 기어 커버를 잃어버리지 수 있도록 dont
- Chunky CVA drives make the rear suspension bind free throughout suspension travel - cva 드라이브를 큰 덩어리 서스펜션을 통해 무료 여행에 바인딩 후방 서스펜션
- Multi Length Pivot (MLP) on the hub carrier and rear arm for long or short suspension geometry - 다중 길이 피벗 (mlp)은 이동 통신사 및 후방 허브 길거나 짧게 서스펜션 지오메 트리를 팔
- Front bulkhead and shock tower are keyed and screwed together - 전면 차단 벽과 쇼크 타워는 열쇠와 함께 실패
- Front hingepin block is keyed into both the upper bulkhead and also the lower bulkhead - 전면 hingepin 블록은 열쇠를 차단 벽 상단과 하단 모두 차단 벽
- Front Hingepin block has replaceable teflon sleeves - 전면 교체 hingepin 블록은 슬리브가 테플론
- Rack or traditional style bellcrank is offered - 랙 또는 전통적인 스타일 bellcrank가 제공

Source: RC Forum [rcforum.co.kr] 출처 : 이끌고 포럼 [rcforum.co.kr]



















Usage » 사용하는 방법»
If you republish any elements from this page on another website, including text, original pictures or formatted results please be sure to add a link back to this page as the source. 이 페이지에서 모든 요소를 다시 게시하는 경우에 다른 웹사이트를 포함한 텍스트를, 원본 사진이나 형식의 결과를 반드시 다시이 페이지로의 링크를 추가의 소스.
Related Posts » 관련 기사보기»
Comments 코멘트
Sorry comments are closed for this entry 죄송합니다 해당 항목에 대한 의견은 폐쇄