Saturday, September 22, 2007
ProTek R/C 1000mAh Futaba TX Pack protek r /炭1000mah雙葉德克薩斯州，包 Categories - ProTek, Radio Equipment, Batteries, Electric, Products , trackback
More releases from A Main Hobbies, this time the announcement of a new ProTek R/C brand Lithium Polymer transmitter pack designed to fit the Futaba 3PK and Airtronics M11 radios.釋放更多的從一個主要的業餘愛好，這個時候宣布一個新的protek r /炭品牌的鋰聚合物發射機包設計，以配合雙葉3pk和airtronics m11收音機。 This super light weight Li-Poly transmitter battery is designed to reduce the overall weight of your transmitter, which is great for those long main events.這個超級重量輕，李聚發射機電池設計，以減低整體的重量，您的發射機，這是偉大的為那些長期的主要活動。 Even though this is the lowest capacity Lithium Polymer transmitter battery pack sold under the ProTek R/C brand, it will still provide more than enough capacity to power your transmitter all day long, typically 7 to 8 hours of runtime.即使這是最低的容量鋰聚合物電池匣發射機下出售的protek r /炭品牌，它仍然會提供足夠多的能力，權力，您的發射機所有一天，通常是7至8小時的運行時間。
Click here for more details…點擊此處查看更多詳情…
The overall weight of your transmitter will be significantly reduced over the use of typical NiMh receiver packs (76 grams compared to 225 grams for eight typical NiMH AA batteries!).整體的重量您的發射機將大大減少超過使用典型的鎳氫電池接收包（ 76克相比，二百二十五克為8典型的鎳氫電池AA電池！ ） 。 Try to hold a pack of eight traditional AA size batteries and compare it with this Li-Poly Transmitter pack.嘗試舉行一包八傳統枚AA型電池，並與這李聚發射機包。 The feeling is just awesome, and you get an incredible 7 to 8 hours of run time!的感覺，只是可怕，你會得到一個不可思議的7至8小時的運行時間！
Runtime: 運行時間：
Don’t be thrown off by the capacity rating of Li-Poly battery packs, as you will get awesome runtime out this pack!不要被拋出關閉的能力評級李聚電池盒，你會得到可怕運行時指出，這包！ Given that Li-Poly battery packs provide a higher nominal voltage (11.1V nominal), the actual capacity of the battery pack when compared to a typical NiMH battery pack (9.6V nominal) is about 15% more than the rated value (so this pack would be about the same as a 1150mAh NiMH pack in total capacity).鑑於李聚電池盒提供一個更高的名義電壓（ 1 /名義） ，實際容量的電池匣時相比，一個典型的鎳氫電池匣（ 9.6v的名義）是約15 ％以上的額定價值（因此，這包會，大約同一作為一個1150mah鎳氫電池包在總容量） 。
How should the battery be inserted into the transmitter? 應如何電池插入到發射機？
The foam provided in the package should be used to pad the transmitter battery area and stop the battery from moving around.泡沫提供的一攬子應該用來墊發射機電池領域，並停止該電池由走動。 It will fit into the transmitter battery housing with the battery sitting on it, and then, while pressing lightly on the battery, slide the cover over the battery.它將融入發射機電池房屋與電池會議上，然後，同時按下掉以輕心，對電池，幻燈片封面超過電池。
IMPORTANT: 重要說明：
1. 1 。 You will need a Li-Poly specific charger to charge the pack (NiMH or NiCD only chargers WILL NOT WORK!)您將需要有一個李聚具體的充電器充電包（鎳氫或鎳鎘電池充電器，只有不會工作！ ）
2. 2 。 You must not over discharge the Li-Poly battery pack below 9.0V.您必須不超過履行李聚電池匣下面9.0v 。
3. 3 。 Read the instructions carefully before operating this battery.閱讀說明之前仔細經營，這電池。
Specifications: 規格：
- Capacity: 1000 mAh -容量： 1 000M AH的
- Transmitter Run time: 3 to 4 hours -發射機運行時間： 3至4小時
- Weight: 76 grams -體重： 7 6克
- Li-Po cell arrangement: 3S1P -利寶細胞的安排： 3 s1p
- Norminal voltage: 11.1 Volts -n orminal電壓： 1 1.1伏特
- Discharge capability: 3C (5.1A max) -放電能力： 3 C （ 5 .1a最大值）
- Dimension(mm): 106 x 54 x 10mm -外形尺寸（ m m） ： 1 06× 5 4x一十毫米
- Connector: Futaba ‘J’ Type (cut off the tab for the Airtronics M11) -連接器：雙葉'動詞類型（切斷標籤為a irtronicsm 11）
Source: 資料來源： A-Main Hobbies一主要的業餘愛好 [amainhobbies.com] [ amainhobbies.com ]
Usage »使用»
If you republish any elements from this page on another website, including text, original pictures or formatted results please be sure to add a link back to this page as the source.如果您重新發布的任何內容，從本網頁上另一個網站，包括文字，圖片或原來的格式的結果，請務必添加一個鏈接回到此頁為源。
Related Posts »相關文章»
Comments評論
Sorry comments are closed for this entry很抱歉的評論是封閉，以便進行這個項目