Acorn Racing Servo extension & protector
Acorn Racing has released this servo extension and protector, which is a solution to servo wire connectors coming loose. They came up with a simple design that is a small, light, easy, effective and hassle free way to secure the connection of servo wire connectors that in turn can be mounted anywhere with a small piece of mounting tape. This protector allows the insertion of connectors only when the male adaptor is fully inserted into the female. No binding or crimping of the servo wire is needed and the connectors will not come loose when fitted into this housing. A specially made 80mm servo extension is included.
Source: Acorn Racing [acornracing.com]
Categories - Accessories, Acorn Racing, Products, Radio Equipment
Usage
If you republish any elements from this page on another website, including text, original pictures or formatted results please be sure to add a link back to this page as the source.
Related Posts
Comments
1. Serzoni - November 5th, 2009 at 16:13
They came up with the design? These things have been used on R/C airplanes for DECADES..literally.
2. Joe Corally - November 6th, 2009 at 03:13
It looks pretty similar to the ones used in airplanes but it seems that they have added some notches by the side to hold the connectors. i had some in the past where we literally squeezed these fellows in. I would say that they have made the effort to make some short servo extensions for the receiver packs, we haven’t really got 80mm extensions. Its ideas that we never thought of incorporating in a car. Cool!