Pietsch finally gets his title at third attempt
Having proven himself to be the fastest driver in the World for a third consecutive time Robert Pietsch today finally went on to claim the crown of the World’s best racer as he lifted his first IFMAR title at the 2011 1:8 Onroad World Chamionship in Miami, Florida. The German headed a Mugen 1-2 in a rain shortened final at Homestead RC Raceway with Keisuke Fukuda finishing runner-up ahead of Capricorn driver Dario Balestri who completed the podium at the 18th running of the sports original World Championship.
View our complete event coverage here.
Sunday, April 17, 2011
Robitronic Fuel & Exhaust coolers
Robitronic have released these new fuel and exhaust coolers. The performance of today’s high powered nitro engines depends on many factors. One of the most crucial but often overlooked influence stems directly from the temperature of the fuel that enters the carburetor, the cooler the better. They offer a selection of fuel and exhaust coolers that efficiently lower the temperature of the exhaust gasses used to pressurize the fuel tank. These coolers are made from aluminum with large fins for excellent heat transfer and are available in black or red and as a complete set or separately.
Source: Robitronic [robitronic.com]
Sunday, April 17, 2011
Yokomo R12 & GT500 kingpin spacers
Yokomo have released these optional kingpin spacers for their 1/12th scale R12 and GT500 chassis’. The pack of spacers includes 0.5mm (4), 1.0mm (2) and 2.0mm (2) and allow the user to adjust the ride height be placing them under the steering knuckle as shown in the photo above.
Source: Yokomo [teamyokomo.com]
Sunday, April 17, 2011
Collari still in hunt for 10th World title
Defending 1:8 Onroad World Champion Lamberto Collari is still in the hunt for a 10th World title but it was a close call for the Italian legend after a incident caused by American Paul Ciccarello on the entry to the pitlane cost him 6 seconds and the lead of the race. The 1/4 Finals saw the demise of some big names in Miami with 2009 direct qualifier Mark Green, 200mm World Champion Ralph Burch and Japanese Champion Masao Tanaka falling by the way side.
View our complete event coverage here.
Saturday, April 16, 2011
Pro-Line Suburbs 2.0 M3 Buggy rear tires
Pro-Line have released their new Suburbs 2.0 2.2″ M3 (Soft) Off-Road Buggy rear tires. Introducing the next generation in indoor clay and outdoor blue-groove race tread technology from Pro-Line, the Suburbs 2.0 rear buggy tires. This tire represents the culmination of years of research, development and track testing to give you the best traction and the longest wear available. Featuring a taller tread and more pins which provide longer wear and more traction, subtle changes were made to the tread design to make them produce faster lap times on a variety of racing surfaces.
Source: Pro-Line [prolineracing.com]
Saturday, April 16, 2011
Swauger fails to make it to the big day in Miami
Today was lower finals day with the biggest casualty being 2009 World Championship runner-up Mike Swauger. Driving Xray’s new RX8 chassis the Ameican ace had a difficult qualifying ending up in the 1/16th final but easily won the 20 minute encounter from team-mate Martin Hudy to progress to the final race of the day and one step away from making it through to the big day.
View our complete event coverage here.
Saturday, April 16, 2011
Boca Bearings MX Engine bearings
Boca Bearings is pleased to announce their new and expanded line of MX Engine bearings for radio controlled engines. RC engines have evolved and become even more powerful. Today they use more nitro fuel and come under greater thrust loads than in the past. The nitro content can dry the thin stock bearing retainer very quickly making the whole bearing susceptible to premature failure when subjected to high radial and thrust loads. These MX bearings have a unique and new internal design to increase load capabilities that allows them to work under harsher operations where shafts come under excessive side and radial load. These bearings are available in both a standard high-speed version with either chrome steel balls or races, or as a ceramic hybrid, with ceramic balls and chrome races. For a limited time Boca Bearing will be offering an additional $10 discount on all MX bearing kits. Full bearing kits are available for engines such as Nova Rossi .21/12/15/21/28 size engines, OS 15/18/20/21/25/26/28/30/32/37/40 size engines, Picco 15/21/28/40/45 size engines, Collari, Sirio and more.
Source: Boca Bearings [bocabearings.com]
Friday, April 15, 2011
McPappy Racing Brushless Dyno
Today’s brushless racing introduced new variables, such as mechanical timing, speedo timing, RPM ranges, rotor diameters on top of the rollout variable. The new McPappy Racing DIY Brushless Dyno helps you to make sense of some of that. This dyno platform will allow you to test your motors against a brushless slave motor that provides consistent resistance from test to test. It was designed to accommodate multiple test configurations: direct coupler in between both motors, direct coupler with flywheel in between both motors, offset the motors using 2 pinions, offset the motors using 2 pinions flywheel. The flywheel provides inertia resistance and the brushless slave provides constant resistance. Together they reproduce similar track resistance. The key component to this dyno platform is a huge piece of 1/4″ 6061 aluminum which acts as a giant heat sink. Two large fans and all of that aluminum mass will bring the temperature of the motors and resistors back down to room temperature very quickly. This allows you to run many tests very quickly. To find your most powerful motor and speedo combination is actually quite simple. Your overall goal is to spin the flywheel and slave motor as fast as you can with the least amount of amp draw. The McPappy Racing DIY Brushless Dyno can help you do just that. You will be able to find your strongest motors and most efficient combination of mechanical timing, speedo timing, RPM ranges, and rotor diameters.
Source: McPappy Racing [mcpappyracing.com]
Friday, April 15, 2011
