Huang Yi-Hao wins 200mm Rd1 in Taiwan
The first round of the Taiwanese on-road national championship was held last weekend at the Tainan GTR Racing Track and attracted close to 80 drivers in 3 different classes 1/10th GP, 1/8th GP and 1/10th EP. Serpent Taiwan driver Huang Yi-Hao took his S733 to the expert class TQ, setting a best lap time of 17.6 seconds, which would be a new class track record. He went on to take the win in the final ahead of Xray NT1 driver Howard Cho in 2nd with another Serpent S733, that of Ji-Chen Ton, in 3rd. The 1/8th GP class was won by top qualifier Wing Wang Sang-Chun ahead of Yang Chong Zha in 2nd and Shu Jhi Hao in 3rd, while in the 1/10th EP class it was Leo Chan who took victory from pole position, with Zen Wen-Pin in 2nd and Ron Chen in 3rd.
Tuesday, April 26, 2011
Toshiki wins 2011 CRC cup
The 2011 CRC cup was held at one of the finest carpet venues in Japan, the Crest speedway Race facility in Gunma Prefecture. The CRC cup is an open race for all 1/12th pan car to participate in that is sponsored by Team CRC Japan. 43 drivers participated in this race, including three from the quake-stricken area of the country. Following qualifying it was CRC driver Hayato that took the TQ ahead of team mate Toshiki in 2nd. In the final the places were reversed with Toshiki taking the win ahead of Hayato in 2nd.
View a video from A-main leg 2 here
Tuesday, April 26, 2011
Team Orion Carbon FLX LiPo packs
Following the success of the hard case packs developed specifically for the 1/10th scale Traxxas E-Revo & Summit as well as the 1/16th scale Traxxas E-Revo, Summit and Slash platforms, Team Orion has designed a hardcase pack to maximize the capacity and overall performance of the HPI Savage Flux. It provides a perfect fit and combines LiPo technology with maximum capacity to help push the Savage Flux to its limits. Featuring a carbon look special hard case, up to 45C discharge rate and it comes in 2S and 3S Versions with Deans connector fitted, so it can go into any HPI cars without modifications. Available in 4000mAh, 6000mAh, 8000mAh 2S and 4000mAh and 6000mAh 3S versions.
Source: Team Orion [teamorion.com]
Tuesday, April 26, 2011
Arrowmax RX8 ventilated brake disk
Arrowmax will release this new ventilated brake disk for Xray RX8 chassis. CNC machined from high quality steel it features multiple holes, some with air channels, to ensure the best heat dissipation and friction, while also remaining lightweight and durable.
Source: Free Max [freemaxmp.com]
Tuesday, April 26, 2011
Xray T3 brass chassis balancing weights
Designed for the T3 LiPo chassis, for mounting at pre-drilled chassis holes in the center of the car, Xray have released these precision-machined brass chassis balancing weights. Laser engraved with the weight value for easy identification they are available in 20g and 30g weights.
See the weight mounted to the chassis here
Tuesday, April 26, 2011
Shepherd V8 Velox yellow clutch shoe
Shepherd have introduced their new performance enhancing yellow clutch shoe for the V8 Velox Competion Clutch. This new clutch shoe was succesfully used by our factory teamdrivers at the World Championship 1/8th scale where Shepherd had the second most cars in the top 20 after qualifying with Daniele Ielasi and Michele Romagnoli even ranked in the top 10. The shoe is CNC-machined from a special high grip material that is a little bit harder than the optional white clutch shoe material. Due to the high friction surface it slips less providing maximum acceleration also on high grip tracks when setting the enganging point to high RPMs.
Source: Shepherd [team-shepherd.com]
Tuesday, April 26, 2011
Jared Tebo is Neo11 Champion
Kyosho/Orion factory driver Jared Tebo has won the Neo11 this past weekend, his 3rd win from 3 attempts. Racing at this annual indoor off road event began last Friday and ran through to Monday, a bank holiday in the UK and most of Europe, and attracted the usual gathering of the best international racers from around the World. Qualifying would be a close run thing but in the end it was Jared Tebo that would take the top spot ahead of the three Ryans – Lutz, Maifield and Cavalieri. Following the Semis, in which we saw Atsushi Hara and Simon Willets bump up from low qualifying positions to move into the main and lost 9th place qualifier David Ronnefalk, it was Tebo who would start on pole ahead of Losi driver Darren Bloomfield and Mugen driver Robert Batlle in 3rd. The challenge never materialized in the final and Tebo could pull away and take the win comfortably, finishing a lap up on 2nd place Robert Batlle who had had a race long battle with Ryan Cavalieri, the American finishing in 3rd.
Source: Neo Buggy [neobuggy.net]
Tuesday, April 26, 2011
KO Propo light weight aluminium screws
Some simple new items from KO Propo, who have released these light weight aluminium screws. Claiming to give a better balance when using the wheel extension unit for the EX-10 Helios/Eurus or EX-1 series of transmitters, they are available in black and silver and sold in a full set of 8 pieces.
Source: KO Propo [kopropo.com]
Tuesday, April 26, 2011
