r
September 4, 2013

Xray NT1 front and rear bulkheads

Xray NT1 front and rear bulkheads

Xray have new front and rear bulkheads for the NT1 200mm nitro touring car available. They are made from a new, harder material and ideal when racing in high ambient temperatures or on high-traction surfaces. The front bulkheads were redesigned to accommodate the new front wire anti-roll bar system. The rear upper camber link position on the bulkhead clamp has been provided to increase stability and is recommended for use in very high-traction conditions or when using large-diameter tires in order to help prevent traction rolling. The super-lightweight bulkheads have a very clean and lightweight design and a special composite mixture was developed to allow repetitive assembly and disassembly without stressing or wearing out the parts. All four bulkheads are available as separate items.


Xray NT1 front and rear bulkheads

Source: Xray [teamxray.com]



Usage

If you republish any elements from this page on another website, including text, original pictures or results please be sure to add a link back to this page as the source: