December 12, 2014

Shepherd Velox V10 Pro 2015 200mm nitro on-road kit

Shepherd Velox V10 Pro 2015 200mm nitro on-road kit

Following the introduction of the 2015 version Velox V8 EC 1/8th scale kit Shepherd now announce the Velox V10 Pro 2015 1/10th 200mm nitro touring car. The upgraded kit comes with the Team Edition 7075-T6 aluminium chassis plate that sports an additional cutout for the middle bearing block which prevents it from twisting and keeps the belts always in a straight line. Also included is the optional radio plate mount to increase stiffness and strength while reducing rear at the same time.


Other features include smaller steering pivot balls and balljoints for less play and lower wear, a new carbon body mount plate for more stable body support and a hollowed lightweight 2-speed shaft to reduce weight and rotating mass by about 30 percent, resulting in improved acceleration. The 2015 kit is rounded out by steel pivot balls for less play and lower wear and new smaller camber link pivot balls, again to offer an improved fitment and lower wear.

Shepherd Velox V10 Pro 2015 200mm nitro on-road kit

Shepherd Velox V10 Pro 2015 200mm nitro on-road kit

Shepherd Velox V10 Pro 2015 200mm nitro on-road kit

Source: Shepherd [team-shepherd.com]



Usage

If you republish any elements from this page on another website, including text, original pictures or results please be sure to add a link back to this page as the source: