r
September 2, 2015

Serpent Spyder SRX4 1/10th 4WD buggy kit

Serpent Spyder SRX4 1/10th 4WD buggy kit

Serpent’s Spyder SRX4 1/10th 4WD was first seen in prototype stages a while ago and the kit is finally available for the public. The buggy, that was steered to the runner-up spot at the 2015 EFRA Euros, is based on a 2.5mm carbon fibre chassis and it features a dual-belt drivetrain with fluid-filled gear differentials, a 3-pad slipper clutch, front clicker unit and a 3mm aluminium motor mount. The front part of the drivetrain is housed in a central spline that also makes for a strong chassis backbone. The car is designed to use saddle pack batteries, it utilises a low profile steering servo and it comes with 4mm carbon fibre shock towers, big bore shock absorbers and the kit is rounded out by a mid-cab design bodyshell, high downforce wing and a set of white disc rims.

Features:
– 2.5mm carbon fibre chassis with composite side rails
– Composite central spline
– Saddle pack battery mount with alloy thumb nuts
– 2-belt drivetrain with gear differentials
– Springsteel driveshafts
– Hardened steel suspension pins
– Alloy shock absorbers with 3.2mm shafts & X-rings
– 4mm carbon fibre shock towers
– 3-pad slipper clutch
– Lockable clicker front one-way
– Fully ball-raced steering
– Aluminium suspension brackets
– Ball-raced rear anti-roll bar

Serpent Spyder SRX4 1/10th 4WD buggy kit

Serpent Spyder SRX4 1/10th 4WD buggy kit

Serpent Spyder SRX4 1/10th 4WD buggy kit

Serpent Spyder SRX4 1/10th 4WD buggy kit

Serpent Spyder SRX4 1/10th 4WD buggy kit

Serpent Spyder SRX4 1/10th 4WD buggy kit

Serpent Spyder SRX4 1/10th 4WD buggy kit

Serpent Spyder SRX4 1/10th 4WD buggy kit

Source: Serpent [serpent.com]



Usage

If you republish any elements from this page on another website, including text, original pictures or results please be sure to add a link back to this page as the source: