r
June 3, 2016

Serpent Cobra SRX8 carbon fibre A-arm inserts

Serpent Cobra SRX8 carbon fibre A-arm inserts

Serpent have introduced front and rear A-arm carbon fibre inserts for the Cobra SRX8 buggy. Cut from stiff 1.5mm carbon fibre the inserts are usable on the top, bottom or both sides of the wishbones in place for the standard composite inserts, resulting in less flexible arms which in turn leads to a more precise handling especially on high-bite surfaces. With three different configurations per arm the inserts allow for maximum tuneability. The parts use the original mounting hardware and they come in sets of two upper and two lower plates available separately for the front and the rear arms.


Serpent Cobra SRX8 carbon fibre A-arm inserts

Serpent Cobra SRX8 carbon fibre A-arm inserts

Serpent Cobra SRX8 carbon fibre A-arm inserts

Source: Serpent [serpent.com]



Usage

If you republish any elements from this page on another website, including text, original pictures or results please be sure to add a link back to this page as the source: