r
August 18, 2016

Schelle B6 flat A-arm front & 31mm rear shock towers

Schelle B6 flat A-arm front & 31mm rear shock towers

Coming from Schelle Racing Innovations are two new carbon fibre option parts for the Team Associated B6 buggy. First up is the flat A-arm front shock tower and wing mount. The front tower design mates with a 3-D-printed upper wing mount, allowing to screw-on the front wing without removing the shock standoffs. The design also allows to quickly extract the mount without removing the shock standoff screws, as well as remove the wing off the car for travel or cleaning while keeping the mount in place. Furthermore the screw-on front wing design eliminates the common wing failure of cracking at the mount tab corner. The front tower kit comes including suitable hardware and a gullwing A-arm variant will be released soon.


Also new is the 31mm short rear shock tower that allows to adapt the 31mm shock bodies onto a B6 while using short eyelets to keep the shock as low as possible to the chassis for an overall lower centre of gravity. Testing has shown the larger oil volume translates to better jump landing and more plush rear suspension feel without bottoming out. The shock tower is cut from 3.5mm high-quality carbon fibre and it fits both the B6 and B6D.

Schelle B6 flat A-arm front & 31mm rear shock towers

Schelle B6 flat A-arm front & 31mm rear shock towers

Schelle B6 flat A-arm front & 31mm rear shock towers

Schelle B6 flat A-arm front & 31mm rear shock towers

Source: Schelle Racing Innovations [schelleracing.com]



Usage

If you republish any elements from this page on another website, including text, original pictures or results please be sure to add a link back to this page as the source: