Exotek D413 4-piece motor plate & 4mm camber savers

Coming from Exotek are a 4-piece split motor plate set for the HB Racing D413 buggy as well as the trick camber savers. Starting with the motor plate, the set is of a unique design that allows for quicker access to the buggy’s centre differential without the need to remove the top plates or ripping out the whole centre bulkhead assemblies. After removing the battery and the top diff cover the two side plates are released so that the diff comes out from the side. The set works with the standard D413 and also Exotek’s Pro’17 chassis and it includes the bulkhead plates machined from black anodised 7075 aluminium, instructions, hardware for the stock or Exotek top diff plates and it uses the stock motor cam and clamp.

Also new are the unique camber savers, trick alloy plates that avoid costly and time-consuming stripped holes in the plastic bulkheads or rear hubs. The anchored plates lock in the car’s camber ball ends and help keep them from pulling out in hard side impacts. The alloy plates act as a 2mm roll centre washer but add the special mounting hole to anchor the plate down in addition to the ball end – in effect doubling the strength of the bulkhead hole. Included are two black alloy camber saver plates with two steel mounting screws for use in bulkheads and uprights with 4mm hole spacing and thus buggies such as the HB Racing D413 and Kyosho’s RB6 and ZX-6 series.

Source: Exotek [exotekracing.com]