r
September 18, 2017

RCSS EB410 Next Level hybrid ceramic bearing kit

…RC Speed Secrets have introduced their new Next Level hybrid ceramic bearing kit for the Tekno EB410 4WD off-road buggy. The set includes 18 high-quality ball races that will greatly reduce the drag of the drivetrain for increased acceleration, corner speed and a reduction in operation temperatures across the entire car. The set comes pre-oiled and ready for installation. Source: RC Speed Secrets [rcspeedsecrets.com]…


September 12, 2017

Tekno EB410 1/10th 4WD buggy kit

…Following a couple of teasing features Tekno have now released all information on their forthcoming EB410 1/10th 4WD buggy kit. The company’s first ever 1/10th buggy kit sports a range of new-to-the-class features such as an unusual forward-biased weight distribution, and a reverse bellcrank steering system known from the current breed of 2WD buggies. Other goodies included are large diameter 13mm shock absorbers with 3.5mm shock shafts, quick access differentials, heavy duty 6mm stub axles, as well as a hard-anodised 3mm aluminium chassis, a sliding design aluminium motor mount and full aluminium suspension hangers. The kit is set…


September 8, 2017

Tekno reveal more EB410 details

…Tekno have revealed more details of their forthcoming EB410 1/10th scale 4WD electric buggy kit. Lifting the hood the EB410 appeares to be a shrunken-down version of Tekno’s popular EB48 1/8th E-buggy kit with the centre diff being placed in a rear/centre position while the motor is sitting mid ship. The shorty battery pack found its position in the front, just behind the steering servo while receiver and speed controller are located on the passenger seat, just in front of the motor, leaving the rear section of the chassis pretty much free of everything and making for a…


September 1, 2017

Tekno release more EB410 images

…Following a first series of images and information about their forthcoming EB410 1/10th 4WD buggy, Tekno have now gone a bit more into deep with part two of their introduction series. The latest instalment mainly focusses on the shaft drivetrain that is made up using tapered aluminium centre dogbone-style driveshafts and high-capacity front, centre and rear differentials. Other driveline features include CVA-style front and rear driveshafts with 6mm hardened steel stub axles that run in large inner wheel bearings. The steering assembly uses a new-to-4WD reverse steering bellcrank design that was adopted from today’s 2WD buggies with the…


August 28, 2017

Tekno reveal first EB410 1/10th buggy images

…Following a first teaser Tekno now also released a handful of images and a features list of their forthcoming EB410 1/10th scale buggy. The buggy is a first for the company, that is known for their 1/8th electric conversions and full line of 1/8th scale off-road kits, and it will make use of a sturdy shaft drivetrain with three high-volume gear differentials, tapered 7075 driveshafts and heavy duty 6mm stub axles. The car is based on a lightened 3mm 7075 alloy chassis, it will utilise an adjustable hinge pin system, 2-piece aluminium motor mount, a reverse bellcrank steering…


August 18, 2017

Tekno EB410 1/10th 4WD buggy kit – Coming soon

…Tekno RC have released a first teaser image of their forthcoming all-new EB410 1/10th 4WD buggy kit. A first for the company, the vehicle is set to showcase some unique features, an exclusive chassis layout and a pretty uncommon front end geometry. The buggy is set for a late-September release and Tekno will shorten the time until then with some in-depth features that delve into the design features and philosophy. Source: Tekno [teknorc.com]…


Tonisport
Active Hobby
Exotek Racing
Scorpion
T-Works
Pirani RC
BMT
7075
RC Mart
Wallace Motorsports