October 11, 2023
Reve D have announced a new carbon front upper brace for its RDX 1:10 drift chassis. The front upper brace was developed by the Rêve D engineering team through repeated test runs, paying close attention to the material, thickness, and shapes. By attaching it to the top of the bulkhead, it greatly improves the rigidity of the front section, and great improving stability when drifting. Also the Body post mounting holes are prepared on both sides of the upper brace. By relocating the body post from the edge of the chassis, providing weight reduction at the front section and achieve…
June 9, 2023
Japanese RC Drift car manufacturer Rêve D has introduced a new R-tune spring specially tuned for RDX car kit, which uses the “SWO” material that has been proven in the R-tune series. By adopting a new “SWO” material and making it easier to induce initial subduction even at higher spring rates gives a strong kicking feeling and control performance are realised at a high level. The spring length is 23mm, which is the shortest length in the Rêve D product. By shortening the spring, it is possible to suppress the elongation of the suspension and apply the surface pressure to…
May 22, 2023
RC Drift car manufacturer Reve D has released a new Graphite composite molded Bell Crank and Front Knuckle for its for RDX chassis. The bell crank and knuckle, which contains graphite in resin, promotes weight reduction and rigidity improvement at the front, which is important for RWD drift, and greatly improves steering sharpness and responsiveness. In addition, by increasing the rigidity of the material itself, the precision of the parts has been further improved, and the change in shape when a load is applied is suppressed. By reducing deflection and backlash, highly accurate steering work and suppression of hunting are…
May 9, 2023
RC Drift specialists ReveD from Japan has new aluminium front posts for magnet mount for their popular RDX 1:10 drift chassis. By attaching it to the body mount base used at the base of the RDX bumper and mounting it on the upper bulkhead mount, the heavy magnet can be installed in the centre of the chassis instead of at the edge of the chassis, it will also contribute for weight reduction at front section. The bottom part of the lightweight aluminium post is SE (shiny edge) processed to create a luxurious appearance. Source: Rêve D [teamreved.com]…
April 4, 2023
Japanese RC Drift car manufacturer ReveD has released this Black FRP main chassis & side deck set and side deck set for it RDX 1:10 drift kit. The main chassis and side decks, which use cool black FRP, make the RDX run more competitive by increasing the machine’s pitching rigidity and providing moderate flexibility. In addition to the RDX standard hole positions on the main chassis, service holes that can be used with some MC-1 parts have also been drilled, making it highly scalable. By attaching the side deck set to the composite resin main chassis, it improves the rigidity…
March 7, 2023
Japanese RC Drift car manufacturer ReveD has a number of new parts releases for its RDX chassis. The line-up consists of 5 new items starting with an aluminium servo mount made with Shiny Wedge (SE) processing for more luxurious look but more importantly use of the mounts gives more precise steering inputs. A set of 22mm length screws allows for extending the RDX suspension. There are 42mm length suspension pins for using RD-300 suspension mount series and RD-002ASL front lower arm on the front of RDX. Also offered is an aluminium ball bearing spacer for replacing the kit standard plastic…
February 24, 2023
Japanese RC Drift specialists ReveD has announced the release of two new optional parts for its RDX chassis. The first item is a new rear body mount set for fixing RDX magnets. The set is comprised of a carbon rear body mount plate and aluminium rear body mount post for MC-1 that can be attached to RDX, together with the mounting screws. By attaching it to the RDX rear shock tower, it is possible to fix the body using a commercially available magnet. There are 4 holes in the aluminium post, 3 holes in the carbon plate, and 8 holes…
January 27, 2023
RC Drift manufacturer ReveD has released a number of new optional parts for its RDX chassis. The first of these is the EZ Type Wheel Hub Series that can be attached to the rear axle. Compared to the plastic rear hub that comes standard with the kit, the use of aluminium improves the accuracy, and by combining it with the Φ6.0mm axle, it effectively suppresses core shake and allows for smooth rotation. In addition, by holding down the pin that fixes the hub with an O-ring, it stabilises the rotation and prevents the pin from coming off when the wheel…
