Friday, March 28, 2008
Axial Racing 3XH Pipe system Categories - Exhausts, Axial, Engines, Products - comments closed 
Axial Racing have released this 3XH pipe system set that includes the pipe and 3 distinctive rear exhaust headers (medium torque, high torque, and high speed) so you can fine tune the performance to your driving style. Made from strong lightweight 6061 aluminum and polished to a mirror finish the pipe features a reinforced stinger for added durability for those brushes with the boards. Suitable for most 1/10th scale sedan and gas trucks, the pipe mounting point features a side positioned set screw for easy access and the whole set is supplied with all the hardware needed for installation.
Source: Axial [axialracing.com]
Monday, December 3, 2007
Axial 500cc Fuel Bottle Categories - Fuel, Axial, Tools, Engines, Products - comments closed
Axial Racing in the US have releaed this large 500cc capacity fuel bottle, similar in style to that released by Serpent back in June. Made using a soft, long lasting and easy to squeeze bottle material, the spout is made from green anodised aluminum and sports a laser etched Axial logo, while to get the fuel into the tank the end of the spout has a curved neck. Tinted plastic protects fuel from sunlight and still allows you to see level of fuel in bottle, while a rubber cap prevents spilling during transport.
Source: Axial Racing [axialracing.com]
Tuesday, October 16, 2007
Axial Racing Reamer & T-shirt Categories - Axial, Tools, Merchandising, Products - comments closed
More news from Axial Racing with the release of a new body reamer and team t-shirt. The reamer comes supplied with a tip cap and features a lightweight aluminum anodized green body with a comfortable knurled grip while the tip is super sharp and cuts fast, clean, precise holes with razor sharp flutes that are design to efficiently remove debris. Also new for the team racers, and users of their products, is a new black t-shirt that sports the Axial logo on the front in green and a small logo on the sleeve and the rear.
Click here to see the t-shirt… (more…)
Axial Racing have release a new set of socket drivers to add to this current range of race tools. Fitting in line with their other tools, they have been designed to be easy to use ergonomically designed handles to fit in your hand better and provide grip even when your hands are slick from oil and grease. The socket driver tips are sold in a number of sizes with the metric set including a 4.5mm, 5.0mm, 5.5mm, 6.0mm, and 7.0mm while the Imperial set has a 3/16”, 1/4”, 5/16”, 11/32” and 3/8” drivers.
Source: Axial Racing [axialracing.com]
Tuesday, July 17, 2007
Axial Flywheel Wrench Categories - Axial, Tools, Engines, Products - comments closed
Axial Racing have released this flywheel wrench for helping you to tighten and loosen the flywheel nut on your engine. Machined from 6mm 6061 grey anodised aluminium, and sporting the Axial logo, this tool fits most 2, 3 and 4 shoe flywheels on the market. Available now.
Source: Axial Racing [axialracing.com]
Thursday, April 19, 2007
Job openings at Axial Racing Categories - Axial, Industry - comments closed
Axial Racing are hiring. If you are based in the US, California to be exact, and you have always dreamed of working in the RC Industry then Axial could be place for you. They are loking to fill two positions, one for a Marketing Specialist with an emphasis on graphic & web design and the other position is a Customer Service Technician.
If you are interested in knowing more go here.
Saturday, March 31, 2007
Axial Racing flywheel remover Categories - Axial, Tools, Products - comments closed
More new stuff from Axial Racing, this time its some new tools, with the release of this nice green anodised, machined billet aluminum, flywheel remover. Designed to fit most flywheels it allows you to easily pull the flywheel from your engine without causing any damage to the flywheel or end of the shaft. Also officially released by Axial Racing is their new set of hex driver that we showed a while back, color coded and laser etched for easier identification, these tools were designed to be easier to use than most. The handles were ergonomically designed to fit in your hand better and provide grip even when your hands are slick from oil and grease.
Click here to see the tools… (more…)
Axial Racing 28RR Spec 1 Engine Categories - Axial, Engines, Off Road, Products - comments closed
Axial Racing have announced the release of their 28RR Spec 1 Engine that is suitable for truggies and monster trucks. The 28RR is designed to rev higher while still maintaining superior levels of torque and the rather nice cooling head helps to lower center of gravity as well as increase cooling capacity.
The 28RR Spec 1 is a .28 cubic inch big block engine featuring a machined cast aluminum heat-sink head for extra cooling, dual bushing aluminum connecting rod, true ABC chrome sleeve construction for durability, and a three needle 9.0mm slide carburetor (including 8.0 & 8.5mm optional venturi’s) with a composite body for better performance at higher temperatures. The carburetor features a factory re-set line on the high speed needle, and flush needles making re-setting, to baseline factory specifications, quick and easy.
Source: Axial Racing [axialracing.com]
