Thursday, April 24, 2008
Hot Bodies Cyclone 12 Options Categories - Hot Bodies, Bodies, Accessories, On Road, Products - comments closed 
Hot Bodies have released lots of new products for their European Championship winning Cyclone 12, starting with 3 new shells. These shells offer different tuning possibilities for the C12 and are available as an open cockpit shell, the Mark-I, as well as 2 closed cockpit versions called the Mark-II and III. Also available for further tuning your chassis are 2 new ranges of spring hardnesses, soft and hard, for both the front and rear of the car as well as new 4mm trailing offset front wheel axles, giving the car a different steering response compared to the 2mm trailing offset that comes with the kit. Finally for the C12, is a new shock shaft, front kingpins and wishbone pivot pins, that have been titanium nitrade coated for a smoother action that the standard steel parts.
Click more to see the other products… (more…)
Friday, April 11, 2008
Edit Cyclone 12 Ride Height Spacers Categories - Edit, Hot Bodies, Accessories, On Road, Products - comments closed
Edit RC have released a set of ride height spacers to precisely tune the front ride height of your Hot Bodies Cyclone 12. Made from lightweight alloy, they are supplied in a set of 4 x 0.5mm and 4 x 1.0mm thick plates meaning you will be able to get exactly the correct ride height for ultimate performance and precise control on the track.
Source: Edit RC [rc-edit.com]
Tuesday, April 8, 2008
HB Pro Spec Ball Diff Complete set Categories - Hot Bodies, Accessories, On Road, Products - comments closed 
Hot Bodies have released this all-new Pro Spec Ball Diff set for your Hot Bodies Cyclone and which has already been used by the company’s factory team to achieve impressive race wins. The 39-tooth pulley is a direct replacement for the existing ball diff pulley, and features wider spacing for the supplied ceramic diff balls. The cup joints are made from machined POM lightweight space-age plastic for great acceleration, while the included thicker and stronger titanium nitride diff screw and nut will outlast the standard diff screw. As this is a complete set, everything is included like the diff ball bearings, D-cut rings, spacers and diff & thrust bearing grease.
Source: Hot Bodies [hbeurope.com]
Wednesday, March 26, 2008
Hot Bodies 12th wheels & Ceramic balls Categories - Wheels, Hot Bodies, Accessories, On Road, Products - comments closed 
Hot Bodies have released a number of general items beginning with these 1/12th scale dished wheels for both the front and rear of most 1/12th scale chassis’. High quality and running true, the rear wheels fit most 3-hole rear axles, while the front wheels fit most 1/12th scale front axles. Also for 1/12th scale chassis’ but working in any ball diff that accepts 3mm balls is this set of 12 ceramic diff balls. Enabling you to build the smoothest differentials possible, they allow a much smoother action than steel or carbide diff balls.
Click more to see the other parts… (more…)
Friday, March 21, 2008
Hot Bodies Cyclone TC chassis Categories - Hot Bodies, Electric On Road, Cars, Products - comments closed 
HPI Japan have announced the Cyclone TC, the latest version in a long line of successful touring cars released under the Hot Bodies brand. Instead of being a completely new platform, the TC is just a refined version with better performance, easier adjustment and stronger parts and incorporates a number of parts previously released as optionals in the kit as standard. The new 2.5mm carbon fibre chassis plate has been designed to take the recently released plastic battery holders, while the front upper deck appears to be taken from the carpet conversion but has been made from 2mm carbon fibre. The rear upper plate is also 2mm thick but has been made from FRP material. The rear of the car has been supplied with a revised ball differential while the front sports a one way/solid front axle that comes with pins to change between the two options. The rear wishbones now feature optimised lower shock mounting positions and a neat feature on the front and rear anti roll bar push rods is that they are now to the bar from the top and so can have their length easily adjusted. The car also seems to be supplied with updated shock towers and I am sure other features but this is all I can work out from the Japanese translation.
Click here to see more chassis pictures… (more…)
Friday, March 7, 2008
Hayato Matsuzaki LE Cyclone D4 Categories - Hot Bodies, Electric Off Road, Cars, Products - comments closed 
Limited to only 20 pieces, this special Cyclone D4 4wd buggy from Hot Bodies is a replica of that used by current 2wd World Champion and 4wd Japanese National Vice Champion Hayato Matsuzaki. Supplied in a nice metal carry case, the car is completely assembled and comes with Panther tyres all around and topped off with a very nice replica painted shell and wing. For your money, nearly EUR 1,400, you also receive the top of the line KO Propo EX-10 Helios C2 transmitter, PDS-2413ICS steering servo and VFS-1 Pro C3 2008 speed controller. Accompanying your transmitter is a metal carry case, while in the car is mounted a Team Checkpoint brushed electric motor. The D4 itself sports some optional parts including, aluminium rear uprights, aluminium C-hub blocks and new toe in suspension blocks. As a nice touch, both the car and its case sport a limited edition badge which is also numbered.
Click here to view more pictures… (more…)
Thursday, March 6, 2008
Hot Bodies Factory Tools Categories - Tools, Hot Bodies, Products - comments closed 
A few days ago we wrote about some new releases from Hot Bodies, which included a new range of tools. Hot Bodies have now released more information about that range and besides the standard hex wrenches and screw drivers, there are also some set-up tools and turn-buckle wrenches. For helping with set-up, HB have released this black anodised droop gauge and matching pair of 20mm tall droop blocks, with the gauge able to measure from 0mm to 10mm in 0.5mm steps. For adjusting 3.7mm turn buckles HB have released a 80mm long wrench, which like the other tools is black and sports a HB logo on the side.
Click here to see the other products… (more…)
Wednesday, March 5, 2008
HB Cyclone Hub Carriers & Spur gears Categories - Hot Bodies, Accessories, Off Road, On Road, Products - comments closed 
Hot Bodies have released 2 new items, for both their Cyclone D4 4wd electric buggy and for general touring car use. Beef up your D4 with these tough purple anodised aluminium front hub carriers, included with the Worlds Edition they are now available for the standard D4. Sold in a pair of 2 and supplied with purple anodised roll centre adjustment washers, they are available in both 0 and 13 degree versions. Also new from HB is a range of 64 pitch spur gears, available in one-tooth steps from 88 to 94 teeth and 101 to 110 teeth, so now you can select the ultimate gear ratio for your touring car, pan car or other racing vehicle.
Click more to see the spur gear… (more…)
