Xtreme Racing has once again stepped up to bring you a complete line of Carbon Fiber items for the Losi 5ive truck. The lineup includes 6mm thick heavy duty shock towers for the front and rear, 3mm brake discs, mud guards, Standard size servo mounts both with and without a nifty transponder mount and even a mount for your GoPro camera.

Source: Xtreme Racing [xtremercracing.com]

Capricorn have released their new 1/8 ‘reverse’ on road clutch. After various tests by Capricorn drivers, this new configuration that follows the current trend which sees a flat flywheel and tapered clutch shoe plate makes the clutch more progressive with good initial engagement. The weight of the flywheel is only 5.3grams which saves engine power and Capricorn has also decided to reduce the prices of all its 1/8 and 1/10 clutches.

Source: Capricorn [capricornrc.com]

Previously released for the RX8, Xray have now released these conical clutch washer springs for the NT1 clutch. These spring washers offer more consistent clutch operation for maximum punch. When using the standard spring, after the clutch is set for the first time the spring becomes deformed over time and needs retightening. This new conical clutch washer spring set allows the clutch to retain its setting for a very long time without needing readjustment.

Source: Xray [teamxray.com]

New for the H-K1, KM Racing have released these optional front and rear diff joints. Made from high quality red steel, they have been given a special hardening treatment for the ultimate in durability. Featuring a lightweight design, with the drive cups machined out, these joints are a direct fit onto the H-K1 and H-K1 Evo.

Source: KM Racing [km-rc.com]

New from JQ Products, THE Boxes are available in 3 different sizes. The small box is good for screws, shims, o-rings, clutch parts etc, the medium sized box is perfect for 2 sets of extra shocks, and some shock parts, or some spare diffs. Finally the large box is good for most spare parts. Available now.

Source: JQ [jq-products.com]

Capricorn have released a number of new option parts for their car including this set of hard coated aluminium suspension pivot balls. The balls are also suitable for the Mugen MTX-5, MRX-5 and Xray NT1. Other new items include an aluminium servo saver with a new 13mm ackermann, new -0.75mm or 0mm offset wheel hex hubs, a 13.1 gram tungsten weight and a new 1/8 or 1/10th wheel adapter for the Brain Stuff additive applicator machine.

Source: Capricorn [capricornrc.com]

Spec-R have released their new 64P touring car spur gears. Made from high quality nylon with carbon, they are smooth, durable and lightweight and can fit a wide range of popular cars. Available from 105T to 116T.

Source: Spec-R [spec-r.com]

KM Racing continue to release parts for the Xray NT1 with the introduction of their own range of 2-speed spur gears. Made from a durable high grade plastic, they are available in 53T, 54T & 55T for 2nd gear and 58T, 59T & 60T for 1st gear.

Source: KM [km-rc.com]

New from Axial Racing to set your Wraith up for high speed rock racing, or Recon G6 Challenge style events is this front and rear sway bar kit. Designed for high speed this system will let you soften up your suspension for jumps, while keeping torque twist and body lean to a minimum during acceleration. A sway bar’s main function is to control body roll, yet still allow your shocks to move vertically with the changing terrain giving you more stability at high speed. Each sway bar lever is made from CNC machined black anodized aluminium and each kit includes three different steel sway bars (soft, medium and firm) for fine tuning body roll and suspension articulation. All required hardware is also included.

Source: Axial [axialracing.com]

Tresrey have released new hop-up parts for the Team Durango DEX210/410 expected to be released in early February. First up is the aluminium RF suspension hanger for more stiffness and durability. Changing “kick-up” angle to 3deg from 2deg which is kit standard makes the rear of the car more stable and gives you more room to set-up.

Aluminium front bulkhead (red/DEX210)
Direct replacement to the standard plastic one for more stiffness and durability. By installing this 8g heavier bulk head makes the car weight balance more forward and can be use as one of the set-up. Anodized in “Tresrey-Red”. Made in Japan.

Aluminium washer 3x8x0.5(0.75)mm (red/10pcs)
0.5mm and 0.75mm are added to the lineup of Tresrey aluminum washer and now you can do more “detailed” set-up.

Aluminium washer set (red/26pcs/DEX210)
A complete aluminum washer set for Team Durango DEX210 with “Tresrey-Red”. These washers will match all of the Tresrey red aluminum hop-up products and good for dress up. Anodized in “Tresrey-Red”.

Aluminium 14mm hex wheel hub clamp type (red/2pcs/DEX210/410)
Clamp type hex hub for more reliability and stop dropping wheel pin when you take off the wheel. Dedicated wheel pin and clamp screw included. Anodized in “Tresrey-Red”. Made in Japan.

Aluminium big bore shock preload nut (red/4pcs/DEX210/410/DESC410R)
Aluminum preload nut for more durability and the reproducibility of shock performance. O-Ring included. Anodized in “Tresrey-Red”. Made in Japan.

Axle Shaft (for B4.1 WHEEL/2pcs/DEX210)
Steel axle shaft for Team Durango DEX210 to use with Team Associated 2WD front wheel. Direct replacement to the standard axle shaft. Made in Japan.

Aluminium battery thumb nut (red/2pcs/DEX210)
Direct replacement to the standard plastic ones for reliable retention performance. Anodized in “Tresrey-Red”. Made in Japan.

Source: Tresrey [tresrey.com]