Red RC » Accessories

March 8, 2019

Team Associated CR12 3-D-printed optionals

Coming from Team Associated and available through their Shapeways 3-D-printing store are two new optional parts. First up is a battery box that allows the use of shorty-style battery pack for longer run time. The tray also adds additional options for adjustments to weight bias and to mount the part no additional hardware is needed. However it requires modification of the stock aluminium electronics tray. Also new is the servo mount to run the servo in a rearward-position to improve steering geometry through suspension articulation. No additional hardware needed but the part requires modification of stock the aluminium electronics tray. More information on buying can be found here.

View more images here

March 7, 2019

WRC Racing F18.2 shock absorber extension

WRC Racing have introduced a centre shock extension kit for the F18.2 formula car. Machined from aluminium and coming black anodised and including an additional pivot ball the extension allows to attach the shock to the upper servo plate, effectively lengthening the shock for better drivability over bumps and improved on-power traction especially in low-traction conditions. The set does not included the centre shock.

Source: WRC [wrc-racing.com]

March 7, 2019

Exotek F1 IFS V2 front end set

Exotek have introduced the V2 variant of they F1 IFS front end kit for the Tamiya TRF102, the F104 and Exotek F1R3. New V2 IFS set includes wider heavy duty machined delrin arms that add 2mm per side, precision machined delrin shock pistons and HD steering pins. With our IFS suspension the handling of the car becomes much more linear with real body roll characteristics which means owners can drive harder into a corner while maintaining stability and confident road holding performance which translates to improved overall race time results and consistency. The front end excels in rough and bumpy track conditions and tames all high speed asphalt tracks by making the car glide through all sections. Like a touring car the IFS let’s drivers attack corners without fear of getting pitched out of the groove which typically happens with conventional Formula cars. Additionally, when coupled with the optional upper arm set, the design features of the IFS gives modellers much more set up options just as a real cars. The V2 kit is usable with the Tamiya TRF103, the F104 and the Exotek F1R3.

View more images here

March 6, 2019

Yeah Racing SCX10 II brass knuckle bushings

Coming from Yeah Racing and made for the Axial SCX10 II trail truck is a set of brass knuckle bushings. Machined from high-quality material the bushings add a bit of weight to one of the lower areas of the chassis while also ensuring a highly precise steering system. Each pack included four bushings, enough to outfit a complete axle.

Source: Yeah Racing [yeahracing.com]

March 5, 2019

Samix TRX-4 aluminium battery plates

Coming from Samix and made for the Traxxas TRX-4 trail truck are new aluminium battery plates. Machined from high quality aluminium and coming in three different colours, the plates are available in 23mm and 26mm height specification, allowing the use of LCG or standard height battery packs and due to the aluminium construction the battery hold down plates will help to dissipate heat generated by the battery pack.

View the 26mm specification plate here

March 5, 2019

Tekno EB/ET410 shock standoffs & bushings

Tekno RC have announce the release of two new option parts to improve the longevity of the popular EB410 and ET410 vehicles. First up are new shock standoffs that allow the shock to only pivot between the standoff and bushing, moving the wear surface to the bushing itself and increasing the life of the cap. The standoff are made from high-quality steel, they fit the EB410 and ET410 vehicles and must be used with below’s keyed shock bushings. The bushings are designed to snap in and key with the top surface, making it virtually impossible for the bushing to rotate and wear the cap. Instead, the wear surface has been moved to the shock bushing itself reducing the cost to maintain your suspension. The bushings are made from durable composite plastic and fit the Tekno RC 1/10th scale shock caps TKR6712 and TKR6712A only.

View the shock bushings here

March 4, 2019

Schaffner B6 series waterfall fan mount

Schaffner Racing Products have introduced a new waterfall fan mount for Team Associated B6 and B6.1 based vehicles. The 3-D-printed part was developed for stand-up transmission setups and it ensures improved motor cooling for less performance fading towards the end of a run. When using the mount, most LCG battery packs will fit to the furthest back position, however standard size shorty packs will move back to just one hole position forward, giving owners nearly full adjustability with most battery packs. The fan mount is usable for B6, B6.1, T6.1, and SC6.1 kits and it is also available in a variant for laydown and layback gearboxes.

View more images here

March 4, 2019

Xray XB4 81mm ECS front driveshafts

Xray have introduced their new double joint ECS 81mm front driveshafts for the XB4 off-road buggy. Equipped with durable 2.5mm pins the dual joint design driveshafts greatly reduce wheel chatter at high steering angles, and they make for increased stability, steering and cornering speed compared to standard single joint driveshafts. In addition landing after jumps is also improved- The driveshaft is of a fully rebuildable design, made of high-quality Hudy spring steel and it comes as single item.

Source: Xray [teamxray.com]