Wednesday, May 23, 2007
KM Racing Xray NT1 Options Categories - KM Racing, Xray, Accessories, On Road, Products - comments closed
Japan Hong Kong based KM Racing have released some great new performance parts for the new Xray NT1 200mm. First up is this high performance 2mm steel ventilated brake disk which provides excellent stopping power, even under the toughest of conditions, and which is also suitable for a wide range of other cars too. Also from KM Racing is the release of two different 2.5mm thick carbon plates for both the front and rear body mounts, to be used in place of the body stays that come as standard with the car. The front plate also sports a hole to mount your transponder.
View the carbon plates here… (more…)
Tuesday, May 22, 2007
K Factory options for Team Magic M1B Categories - K-Factory, Team Magic, Accessories, Off Road, Products - comments closed
K Factory, the optional parts wing of Team Magic, have announced the release of some new optional parts for the Team Magic M1B 1/8th scale buggy. First up (above) is a replacement for the original composite servo saver linkage mount, which has been made from aluminium with composite inserts, that increases the strength and durability in this vital area. Also new are some rather cool looking chassis stiffeners, for both the front and the rear of the car, that have been made from aluminium and carbon fibre which are super lightweight and additionally keep the centre of gravity of the M1B as low as possible. And finally is a set of center diff mount stiffening rods, which work with the chassis stiffeners to remove all flex from around the center diff that could reduce the life of the parts in this area.
Click here to see the other products… (more…)
Monday, May 21, 2007
Upgrade RC 2 Tone drips Categories - Merchandising, Upgrade RC, Accessories, Products - comments closed
Upgrade RC, who we have covered extensively in the past, have released their latest customised skins, with the introduction of their 2 tone drips. Available for your buggy wing, starter box and radio, these new skins are colour customisable, allowing you to select the base colour and then select the secondary flame / drip colour from a wide range available, giving you an easy way to stand out even more from the crowd.
To view the other new product skins click here… (more…)
Sunday, May 20, 2007
Steel Pinions by Flap Categories - Flap, Motors, Accessories, Tires, Products - comments closed
Japenese firm Flap, have announced that they will soon be selling their new steel pinions for electric off road cars. Made from hard steel, these pinion have also been constructed to be light weight and combined with a coated surface these pinions will last a very long time. The pinions come in a 48 pitch and in a range of 16T - 24T which are suitable for both 2WD and 4WD and on the rear of the pinions the teeth number has also been printed. Flap has also released new mini rubber tires and inserts in a range of different hardnesses.
Click here to see the mini tyres… (more…)
Saturday, May 19, 2007
Xenon Racing Tamiya DF-03 converison Categories - Xenon, Tamiya, Accessories, Off Road, Products - comments closed
Xenon Racing, who we mentioned yesterday when they showed their latest camber gauge, have also announced their new Tamiya DF-03 carbon double deck conversion. The main chassis has been made from 3mm carbon fibre while the upper deck is made from 2.4mm carbon fibre, which is connected to the front of the gearbox with a tough aluminum block substantial improving the chassis rigidity.
Source: Ark [ark-inc.jp]
Friday, May 18, 2007
Atomic CVDs for X-Ray M18 Pro Categories - Atomic RC, Xray, Accessories, On Road, Products - comments closed
Atomic RC, the small scale optional specialists, have announced the release of these CVD sets for the Xray M18 Pro. Available in a complete set, these blue anodised universal drive shafts are also available to buy seperately in pairs and replace the standard versions that come with the car. We have shown you the Xray versions before and cant see the difference between the 2 except that the Atomic RC version may have more bling factor and are perhaps cheaper.
Check out the seperate sets here… (more…)
Wednesday, May 16, 2007
Pro Line Racing Product News Categories - Bodies, Pro Line, Accessories, Tires, Off Road, Products - comments closed
Pro Line have announced the release of some new products for the month of May with the introduction of their black theme. Their popular high downforce wing that they released a while back is now available in black while their dished Velocity wheels now also come in shiny black for both buggy and truggy. Pro Line have also added to their pre mounted series, with the addition of their popular Hole Shot tire and finally they have announced that their Bow Tie tire will become available in the harder XTR compound.
Click here to see more… (more…)
Monday, May 14, 2007
Corally 12X WC Front conversion kit Categories - Corally, Accessories, On Road, Products - comments closed
Corally have announced the release of a new front end conversion that emulates that used by David Spashett to win last summers World Championship for the Dutch manufacturer. Of course everyone knows that David, and a lot of other Corally racers, were running the CRC front end on their cars, so now Corally have recreated this for themselves and will now be sold as the 12X WC Front suspension conversion kit.
Since David Spashett has become 1:12 IFMAR World Champion 2006 with Corally SP12X US Spec, with a special front end of which brand we all know about, and the demand from end-consumers never seemed to cease, we have finally decided to offer them in our repertoire. All the parts needed to complete the special front end to enable you to simulate the feeling of the true world champion machine are now available.
Click here to see all the parts… (more…)
