Red RC » Accessories

September 22, 2017

RPM B6-series rear A-arms

Adding to RPM’s already released flat and gull wing front A-arms are the new rear arms for the Team Associated B6-series of buggies. With stock A-arms, the amount of slop at the hinge-pins can cause the suspension settings to wander, while the RPM arms are made to stricter tolerances for overall improved precision. In addition the arms are also a lot lighter, saving up to 9.5g in total including hinge pin retaining hardware. The A-arms are made of RPM’s renown nylon material for durability and they fit both the B6 and B6D.

View another image here

September 22, 2017

Helix Designs Anti Body Tuck System

Coming from Helix Designs is their new Anti Body Tuck System for most of today’s 1/10th touring bodies. The Y-shaped and 3-D-printed braces were designed to prevent annoying and race-destroying body tucks by reinforcing the rear trunk and wheel arch section. The system weighs in at about three grams per side, it is very durable, will never fall off and can easily be moved from one body to another. Successfully tested by racers such as Vilkami Kutvonen and with bodies such as the Montech Racer, IS-200, Nazda 2, Protoform MazdaSpeed 6 and LTC-R, the system will also fit many other body shells.

View more images here

September 22, 2017

T-Works TKI4 brass steering knuckle & rear hub weights

Coming from T-Works and made for the Kyosho MP9 TKI4 are brass weights for the steering knuckles and rear hubs. The parts are designed to wrap around the outer bearing seats and add unsprung weight to the suspension which can be beneficial in certain track conditions. The weights come as pairs in 5g, 10g or 15g specification and for the front or the rear of the buggy. Also available is a combo set that contains a pair or each for all-out tuneability.

View the other weight sets here

September 22, 2017

Reedy 0712MG & 1514MG replacement gear sets

Team Associated have introduced replacement all-metal gear sets for the Reedy 0112MG and 1514MG digital servos. These sets contain replacement gears, shafts, and ball bearing to return damaged servos to near-new condition.

View the 1514MG replacement gears here

September 21, 2017

3DRC Project 4X & RC10F6 rear diffusors

German brand 3DRC has introduced new rear chassis diffusors for the Serpent Project 4X and Team Associated RC10F6 on-road kits. Starting with the touring car related part, the diffusor for the Project 4X is a direct replacement for the standard rear bumper and it will improve the rear end grip especially at higher speeds. The 3-D-printed part is of a heavy duty design to withstand even harsh impacts and while addition functionality and looks it also adds protection to the rear end.

Continue reading here

September 21, 2017

HRC Racing Jeep LED roof light bars

Coming from HRC Racing are three different LED roof light bars with Jeep-branded covers. Available in 4, 5 or 6-light variants the light bars come pre-wired with JR plugs, the angle of the bars is adjustable, metal braces make for a sturdy construction and the they are usable on most 1/10th truck body shells.

View the other light bars here

September 21, 2017

MIP TRX-4 HD Driveline kit & wide track kit

MIP have introduced two new option parts for the Traxxas TRX-4 Defender truck in the form of the HD Driveline and the wide track kit. Starting with the driveshafts, the new Scale-ish MIP HD Driveline features scale looks and a light-weight construction, compared to MIP’S X-Duty Drives, as they are nearly 30 percent lighter and 25 percent slimmer. The shafts feature spline technology, CVD makeup, and additionally has an impressive 35 degree of articulation. It also features phased aligned joints that key the male and female splines for smooth power transfer under load with no binding or vibration. All components are heat treated from the highest quality American grade alloy steels. The set includes the front and rear centre driveshafts and it comes including mounting hardware.

Continue reading here

September 20, 2017

Answer RC 1/8th polycarbonate off-road rear wing

Coming from Answer RC is their new polycarbonate rear wing for 1/8th off-road vehicles. Manufactured from high-quality 1.0mm material the wing is both lightweight and strong, making it ideal for nitro and electric classes. The kit includes a moulded plastic gurney flap, a centre dam section and mounting hardware.

Source: Answer RC [answer-rc.com]