June 27, 2017

Xray XB8 series anti-roll bar wires

Xray have expanded their range of anti-roll bar wires for the XB8 series of buggies, trucks and cars by three front and two rear variants. Available for the front are the thin 1.6mm, 1.8mm and 2.0mm wires while the rear range is complemented by thin 1.8mm and 2.0mm variants. All are made using high-quality spring steel, they come laser-engraved for easy identification and fit the XB8 buggy, XT8 truck and GTX8 on-road kit.

View the rear anti-roll bars here


June 27, 2017

Infinity IF14 chassis balance weights

Creation Model have released a range of purpose designed balance weights for the Infinity IF14 electric touring car. A total of four options are available with a pair of left and right 10 gram each front weights, 5 gram each left and right rear weights and a centre weight in either 15 or 30 grams. The weights are easily mounted to the chassis using a single screw with an incorporated mounting pin to keep them locked in position. The design also features a minimal surface contact point between the weight and the chassis so as not to effect chassis flex.

View the other weight options here


June 26, 2017

Ultimate Racing 16mm shock bladders

Modelix Racing have introduced their new set of Ultimate Racing 16mm shock bladders. Compatible with brands such as Mugen, Kyosho, Xray, Serpent, HB Racing, TLR and others, the shock absorber membranes are designed to stay in shape even in severe track conditions and during long mains. The result is a more consistent shock as the rebound rate stays the same, even on the bumpiest of tracks. The bladders fit most 16mm shock absorbers and they come in packs of four.

Source: Modelix Racing [modelixracing.com]


June 26, 2017

Xray XB2 4-gear composite mid motor gearbox set

Coming from Xray and made for the XB2 Dirt Edition 2WD buggies is a 4-gear composite gear box set. Using four internal gears and locating the motor shaft on the left hand side the gearbox is a tuning option to fine-tune the handling characteristics while also allowing for super-easy differential access. The set includes the bottom plate as well as the left and right hand gearbox halves.

Source: Xray [teamxray.com]


June 26, 2017

Radtec BD8 0 degree alloy C-hubs & 41.1mm drive shafts

Coming from Radtec and made for the Yokomo BD8 touring car are a 0 degree C-hub set and a pair of 41.1mm steel double joint drive shafts. Starting with the C-hubs, the parts are machined from high-quality aluminium and they are a direct fit on the ARS rear suspension. Due to using alloy over composite material the overall stiffness and stability is greatly improved which results in increased traction and better drivability on high-traction surfaces. The hubs come black anodised and with silver edge details for looks. Also new is a set of 41.1mm front Premium spring steel drive shafts. They are of a double joint design, use lightweight centre couplers and they are a direct replacement for the stock parts.

View more images here


June 24, 2017

Vigor RC BD8 0 degree aluminium C-hub

Coming from Vigor RC and made for the Yokomo BD8 touring car is an aluminium 0 degree rear C-hub. The hub is machined from high-quality 7075 alloy, it weighs in at only 4.9g and is made to replace the composite part of the RTC system, resulting in improved precision and more traction. The C-hubs come in pairs and use a grub screw to hold the suspension pins which further adds to the overall precision.

Source: Vigor RC [vigorrc.com]


June 23, 2017

MIP TLR 22 4.0 Bi-Metal Super Diff 13.5 drive kit

MIP’s recently introduced Bi-Metal Super Diff kit for the TLR 22 4.0 is now also available as 13.5 drive kit including bi-metal driveshaft bones. Offering a 35 percent lower rotational mass than the standard diff and dog bones, the kit comes in handy especially for Super Stock and Stock racing as the lowered weight makes for increased acceleration and less motor fatigue while offering pin drive binding characteristics. Included in the kit are bi-metal outdrives and bones, heat treated outdrives, carbide diff ball, ground diff rings, an aluminium T-nut and a captured thrust race assembly. Not included are wheel axles and the diff gear.

Source: MIP [miponline.com]


June 23, 2017

PR Racing S401-LW sway bar set

Coming from PR Racing and made for the S401-LW buggy is a new sway bar set. It includes four colour-coded 1.3mm to 1.6mm anti-roll bar wires as well as mounting hardware to make it a direct fit on the buggy and to ensure swift and easy chassis roll adjustment.

Source: PR Racing [pr-rc.com]