Shepherd Velox V10 options
New from Shepherd for their Velox V10 come a number of new optional parts. First up is the new CNC-machined brass battery tray that allows you to increase the weight in the best possible position, in the center of the chassis plate. Weighing 41g the perfectly balanced battery tray lowers the center of gravity significantly and improves the handling of the V10 especially on high traction tracks. The new wide front bumper allows the use for Lola type bodies for the Velox V10 and additionally is said increases steering in fast corners because of improved aerodynamics. New soft black springs increase the possibilities to fine-tune the V10 to specific track conditions. And finally especially for the front differential of the V10 many racers requested harder silicone diff oils and so now there is 200.000cSt, 250.000cSt and 300.000cSt.
Thursday, June 24, 2010
Answer RC Black Losi 8ight CVD axles
Answer RC have now made available a black version of their popular Losi 8 CVD Axles for both centre and wheel hubs. Specially hard coated in a tough black anodising to suit the EU Edition of the Losi 8 2.0, these CNC machined 7075 Aero grade aluminium CVD axles massively reduce rotating mass in the drive train of your vehicle, giving quicker spool up, reduced braking time and sharper handling. The Answer-RC CVD axles have been specially machined with additional CVD pin holes meaning that as the fit becomes sloppy they can simply be rotated round to the next set of holes.
Source: Answer RC [answer-rc.com]
Thursday, June 24, 2010
Litemodz Pro & Pro X CVAs
New from Litemodz is their Pro and Pro X CVAs available for the Schumacher Mi4LP, Team Associated TC5, Tamiya 416X, Xray T3, Corally PHI, Yokomo BD5 and T.O.P Photon. The Pro Edition CVA’s feature hard anodized black driveshafts and lightened high tensile steel axles. Developed as an upgrade offering super high strength, the high tensile steel axle has been centre bored to reduce overall weight and so a complete set of driveshafts weighs in at 14 grams a pair. The Pro X Edition CVAs feature hard anodized black driveshafts and axles and are a super light upgrade offering maximum performance through the reduction in weight. A complete set of driveshafts weighs in at only 10 grams a pair.
Click here to see the Pro X CVAs
Monday, June 21, 2010
LRP X12 StockSpec 1S LiPo tuning rotor
This new sintered rotor from LRP is a tuning option for everyone who uses the successful X12 Stock Spec brushless motor in an 1/12th chassis with 1S LiPo for example. The new 12.25mm sintered 1S StockSpec rotor claims to boost the efficiency and power performance of your brushless motor to a completely new level.
Source: LRP [lrp.cc]
Sunday, June 20, 2010
X Factory X-6 Squared saddle pack chassis
X Factory have released a new chassis for the X-6 Squared that is CNC machined to accept saddle LiPo packs. Development work was done by U.K. National Champion Ellis Stafford, and The Big E used the first saddle chassis to win the last National at Eden Park Raceway. When the X-6 was designed in 2005, LiPos were new and around 3000mAh and were quite light compared to cells. However, almost all drivers then used cells, and the X-6 was primarily designed to use a 4+2 cell arrangement. With the mid motor design, this arrangement concentrated the car’s weight in the center just ahead of the rear wheels. When the early LiPos were used, they were so light that a bit of extra weight to the side made little difference. Now with 5000 and even 6000mAh LiPos, there is more weight and so the new saddle pack chassis returns to the concentrated mass concept of the original. The car rolls less in corners and is more balanced in bumpy sections without use of a sway bar.
View the pack mounted in the chassis here
Thursday, June 17, 2010
Roche Photon aluminium bumper posts
More new products from Roche for the TOP Photon with the release of these aluminum bumper posts. Red anodised, to match the rest of the car, they have been CNC machined and add strength to this critical area in the event of an impact. Sold as a pair.
Source: Roche [roche.hk]
Monday, June 14, 2010
Hong Nor X-Series 46T plastic spur gear
Hong Nor have developed a new 46T Spur Gear in plastic for the 1/8th X1 and X2 electric off-road cars. The gear is not only suitable for Hong Nor X-series buggies but can also work with Kyosho and other brand cars and is a perfect choice for customers who own Hong Nor’s electric conversion kits. This gear made with super heavy-duty material and decreases noise while increasing performance.
Source: Hong Nor [hongnor.com.tw]
Saturday, June 12, 2010
Spec-R TRF416 front solid axle
Spec-R have released this new lightweight front solid axle for the Tamiya 416WE/416X. The solid axle is made from aluminium while the out-drive is made from long lasting hard nylon. The full set weighs in at only 8.6 grams, which is a 19% saving in weight. Spec-R tell us that we should expect a version for the Yokomo BD5 soon.
View more images of the solid axle here
Thursday, June 10, 2010
Mugen MTX-4 Hyper flex chassis kit
New from MSE for the Mugen MTX-4 is this hyper flex chassis kit. The set includes this newly designed 3mm chassis plate combined with a newly developed single piece engine mount. Made from high quality aluminium the chassis is extremely stiff and through ingenious and optimized milling it gives the car incredible stability, which increases the traction and overall performance.
Source: Mugen [mugen.eu]
Thursday, June 10, 2010
