Sunday, March 2, 2008
Diggity設計GV2馬達板材 Categories - Diggity Designs, Academy, Accessories, Off Road, Products - add a comment 
另一個新產品從Diggity為學院汽車，這次設計為公司的2wd兒童車， GV2。 這塊馬達登上板材是超級輕量級和由2.5mm厚實的碳纖維被做了并且是直接替換為用汽車來的標準版本。
點擊更多看它登上了… (更多…)
Diggity設計增加了另一輛汽車到他們的LiPo登上的範圍，跟隨 早先發行 選擇為TC5。 這個新的集合為學院SBV2 4wd兒童車是適當的并且使汽車符合現代堅硬被裝入的LiPo組裝的範圍像隊Orion 3200 & 4800，峰頂賽跑的3200 & 4800，隊檢查站5400個組裝以及一個組裝從核心RC和SMC賽跑。 由碳纖維做，集合是極端容易對設施。
為更多圖片這裡點擊… (更多…)
Friday, February 29, 2008
GRP空氣過濾器線 Categories - Accessories, GRP, Engines, Off Road, On Road, Products - add a comment 
GRP在兩個宣佈了空氣過濾器他們新的聯盟為使用在路和路汽車。 您將注意的第一件事是每個空氣過濾器集合在橙色塑料盒被供應，当路版本供應以5泡沫空氣過濾器和油，而多蟲的過濾器供應以12過濾器和2個瓶特別油。 當他們被認為經常，被替換由高質量材料做，這些零件是低價的。
點擊更多看被設置的多蟲的過濾器… (更多…)
Thursday, February 28, 2008
Losi 1/8蝕兒童車輪胎 Categories - Team Losi, Tires, Off Road, Products - add a comment
Losi發布了他們提供司機踩樣式的新的1/8蝕多蟲的輪胎原諒足够應付最富挑戰性的軌道條件，當維護難以置信的夾子橫跨各種各樣的軌道表面時。 供應以被鑄造的泡沫插入物，他們塑造外形匹配輪胎的外形，以便飾物或修改不是必要的。 為1/8多蟲賽跑具體地開發，這些輪胎是可利用的在賽跑化合物的Losi的專屬銀或紅色并且為1小時的扼要是足够耐久的，當仍然提供一致處理時。
來源： Losi [losi.com]
Wednesday, February 27, 2008
調整RC8托架的Reckward Categories - RMV, Team Associated, Accessories, Off Road, Products - add a comment 
More new parts for the Associated RC8 from Reckward Tuning with the release of these 2 new lower wishbone suspension brackets. Made by Vita Tuning, the new pieces have been machined from aluminium and feature plastic inserts to allow you to adjust the angle of the included spring steel pivot pin and in turn the geometry of your suspension. As well as being able to adjust the roll centre settings, on the rear the user can also adjust the toe settings in 0.25 degree increments to achieve 2, 2.25, 2.5, 2.75 & 3 degrees.
Click here to see the other bracket… (more…)
Diggity Designs Kyosho RB5 rear tower Categories - Diggity Designs, Kyosho, Accessories, Off Road, Products - add a comment 
Following on from the release of the first generation shock towers for the 2wd Kyosho RB5, Diggity Designs have now released the second version of the rear shock tower. Made from super strong 4mm thick carbon fibre, and coming supplied with all the necessary hardware, this new shock tower has more material across the top than the previous version and the upper camber link mounting holes are separated, not all connected as on the previous type.
Source: Diggity Designs [diggitydesigns.com]
Friday, February 22, 2008
K-Factory Alu Cluch Shoes Categories - K-Factory, Accessories, Engines, Off Road, Products - add a comment
K-Factory have released a set of 3 aluminium clutch shoes, aimed at improving the strength and performance of off-road 1/8th scale clutches. Manufactured from high quality aluminium they are designed as direct replacements to the standard clutch shoes found in most off-road buggies and truggies. The use of aluminium means the shoes will last much longer than a standard plastic or carbon injected shoes and this means less maintenance and less cost keeping your car up and running. Another advantage of aluminium shoes is better heat dissipation and improved clutch grip or response. The shoes will hold onto the end-bell harder resulting in less slippage and more power from the engine to the wheels.
Source: K Factory [kfactoryracing.com]
Picco P7-R Evo3 Buggy motor Categories - Picco, Engines, Off Road, Products - add a comment 
Seen on the Picco stand in Nuremberg, the Italian engine manufacturer has released details about their new buggy motor, the P7.0R Evo3. Developed especially for off road racing, the porting of the hard chrome and brass liner has been designed to offer a very smooth power brand. This 5 port motor is equipped with Swiss quality ball bearings throughout, a 14mm Crankshaft and a CNC Machined piston.
Source: Picco [teampicco.com]
