Wednesday, June 4, 2008
Exotek TC5 Lowered layshaft set exotek tc5降低layshaft設置 Categories - Exotek, Team Associated, Accessories, On Road, Products - comments closed
Exotek Racing have released these fibre reinforced nylon bearing caps for the Associated TC5 touring car to loosen the front and rear belts. exotek賽車已經發布了這些纖維增強尼龍軸承蓋為相關tc5房車賽放鬆前方和後方，安全帶。 By lowering the layshaft 1.25mm, the tension on the belts is lessened, freeing up your drive train without the need to buy expensive after market belts.通過降低layshaft 1.25毫米，張力對安全帶是減少，釋放您的驅動器，火車，而不需要購買昂貴的後市場安全帶。 The added benefits are more diff pulley cam setting that you are able to use as well as lowered center of gravity.新增加的好處是更多的差異滑輪凸輪設置您是否能夠使用，以及降低的重心。
Source: 資料來源： Exotek exotek [exotekracing.com] [ exotekracing.com ]
JACO have announced that their Rubberz line of pre mounted rubber sedan tires now come glued on the company’s new Prism wheel.雅科已宣布他們的rubberz線前展開橡膠，轎車輪胎，現在膠合板該公司的新棱鏡的車輪。 This new wheel has been designed to specifically suit rubber tires with just the right amount of flex for superior traction and durability.這一新的車輪設計上已特別適合橡膠輪胎與剛才的權利金額的Flex為優越的牽引和耐久性。 Also new from JACO is the release of pre mounted Nitro Shoes to their new Prism 1.5 wheel.此外，新從雅科是釋放前展開硝基鞋，他們的新棱鏡1.5車輪。 Featuring a 1.5 degree taper, the wheel has a smaller inner edge diameter which matches the camber used on most nitro touring cars and so ensures an even depth of foam accross the surface.具有1.5度錐度，車輪有一個較小的內緣直徑相匹配的曲面上使用最硝基巡迴車等，確保一個更深入的泡沫整個表面。 JACO claim these new lightweight wheels offer a longer tire life, increased traction, improved forward bite and more consistent performance.雅科聲稱這些新的輕量級的車輪提供了更長的輪胎壽命，增加牽引，改善著咬和更一致的表現。
Click more to see the Prism 1.5 explanation…點擊更多地看到棱鏡1.5解釋… (more…) （更多… … ）
Tuesday, June 3, 2008
Xray T2′008 Composite diff delayed X射線t2'008複合差異延遲 Categories - Xray, Accessories, On Road, Products - comments closed
Xray have announced that due to unprecedented demands on their moulding department, the X射線已宣布，由於前所未有的要求，就其造型署， originally planned原本計劃 composite differential for the Xray T2′008 will be delayed with no time schedule.複合微分為X射線t2'008將會被延遲，沒有時間安排。 Xray will continue to include the aluminium differential in the kit as well as offer it as a spare part. X射線將繼續包括鋁的差異，試劑盒，以及提供它作為一個零件。
Source:資料來源： Xray X射線 [teamxray.com] [ teamxray.com ]
Monday, June 2, 2008
Hot Bodies Cyclone TC parts熱點機構氣旋技術合作部分 Categories - Hot Bodies, Accessories, On Road, Products - comments closed
Following the release of the以下為釋放該 Cyclone TC氣旋技術合作 , which we showed you back in March, Hot Bodies have released the standard TC parts as option parts for the other Cyclone’s in the range. ，這是我們表明您早在3月，熱機構已公佈的標準，技術合作部分，作為選項部分為其他氣旋的，在範圍內。 The front and rear bulkheads, as well as the middle block and motor mount are now available and are all purple anodised with the main difference being aesthetic, no longer featuring a chamfered edge.該前方和後方，艙壁，以及中東和電機座山，現已都是紫色電鍍與主要差異的審美，不再具有倒角的優勢。 For performance improvements there are the new shock bodies for smoother shock action, while new front and rear graphite wishbones give an extra lower shock mount.對於性能方面的改進有新的衝擊機構順暢休克行動，而新的前方和後方，石墨wishbones舉一個額外的低山休克。 Finally, there is the Cyclone TC sway bar holder that includes everything you need to upgrade to this new system with the exception of the anti-roll bar.最後，是有氣旋技術合作搖動桿持有人，包括一切你需要升級到這個新的系統，除了反輥酒吧。
Click more to see the other products…點擊更多地看到其他產品… (more…) （更多… … ）
Friday, May 30, 2008
Atomic RC High Grip Formula tires原子鋼筋混凝土高的抓地力公式輪胎 Categories - Atomic RC, Tires, On Road, Products - comments closed
Atomic RC have released these new High Grip Formula tires for use on Mini-Z chassis’.原子區局已經發布了這些新高的抓地力公式輪胎使用的迷你- Z的底盤' 。 Featuring a radial tread pattern, this helps gain more rear grip under acceleration, while swapping the tires to have the tread pattern the opposite direction will give the car a different feeling.具有徑向花紋，這有助於獲得更多的尾部抓地力下加速，而換輪胎有花紋相反的方向將會給汽車不同的感覺。 Available in 2 high grip models, silicone rubber and normal rubber, these tires have been extensively tested, and work best on carpet and RCP surfaces respectively.可在二高的抓地力模型，矽橡膠和正常的橡膠製品，這些輪胎已得到了廣泛的測試，工作最好的地毯和垃圾收集站，分別表面。
Source: 資料來源： Atomic RC 原子鋼筋混凝土 [rcatomic.com] [ rcatomic.com ]
Tuesday, May 27, 2008
Serpent Centax-3 WC Clutch system蛇centax - 3碳化鎢離合器系統 Categories - Serpent, Accessories, Engines, On Road, Products - comments closed
Serpent have introduced a new WC version of their Centax III clutch system and updated 2-speed gearbox system.蛇已引入一個新的碳化鎢版的centax三，離合器系統和更新2高速齒輪箱系統。 The updated transmission uses the same pitch as before but has an improved tooth profile, which combined with a wider spur and pinion gear, gives better contact for better durability and power delivery.更新的傳輸使用相同的球，但有一個改進的齒廓，再加上更廣泛的帶動和齒輪的齒輪，給予更好的聯繫，更好的耐用性和權力交付。 The steel clutch bell housing has also been updated with the pinions no longer forming the structure of this area but are instead attached the steel threads on the new bell.鋼鐵離合器鐘房屋也得到更新與小齒輪不再形成的結構，這方面的，但不是重視鋼線程就新的鐘聲。 This ensures that the gears spin true and are much more resistant to any flexing in this area.這將確保齒輪自旋真實而更為抗拒任何伸縮，在這方面的工作。 As a result of this new bell, the front 2 bearings in the clutch have been changed and are now smaller in diameter compared to previous versions.由於這一新的鐘聲，前線2軸承在離合器已經改變，並正較小，直徑相比，先前的版本。 The new WC transmission cannot be used together with the original spurs or pinion gears.新的碳化鎢傳輸不能一起使用，與原來的馬刺隊或插齒齒輪。 A full range of spur gears (54T-56T, 59T-61T) and pinions (16T-18T, 21T-23T) are available separately.一系列完整的直齒圓柱齒輪（ 54噸-五六噸，五十九噸- 61噸）和小齒輪（一六噸- 18噸， 21噸- 23噸）是單獨提供。
Click here to see more pictures…點擊這裡查看更多圖片… (more…) （更多… … ）
Monday, May 26, 2008
East R-spec GP Touring car wings東的R - GP的規格房車賽的翅膀 Categories - Wings, East, Bodies, On Road, Products - comments closed
Central RC have announced the release of these 2 new GP touring car wings from East, makers of the中央區局已經宣布釋放這些2個新的GP的房車賽的翅膀，從東，決策者的 East Civic東公民 released a short while ago.發表了一份簡短而前。 The R-spec wing comes in 2 versions with spec 1 being better at high speeds and in fast corners, this very rigid wing also helps on corner exit.的R -規格永來在2版本與規格一被更好地以極高的速度和在快速彎道，這非常僵化的右翼，也有利於對角落退出。 The spec 2 wing (seen above) gives better corner entry and offers more grip and stability on corner exit.規格二翼（看到以上）給予更好的角落，入境和提供更多的抓地力和穩定的角落退出。
Click more to see the spec 1 wing…點擊更多地看到，規格一翼… (more…) （更多… … ）
Mugen MTX-4R updated Gearbox parts木甲氨喋呤- 4R原則更新變速箱零件 Categories - Mugen, Accessories, On Road, Products - comments closed
Mugen Seiki have announced the release of these new gearbox parts for the MTX-4R 1/10th scale chassis.木精機已宣布釋放這些新的變速箱零件為甲氨喋呤- 4R原則1/10th規模的底盤。 Sold separately, but designed to be used together, the only difference is the use of 4mm balls for the gearbox mechanism, in place of 3mm versions used originally.單獨出售，而是設計為一起使用，唯一的區別是使用四毫米球變速箱機制，以取代三毫米使用原來的版本。 This makes for a more stable shift between gears and to accommodate these new balls the gearbox shoes have been modified and are therefore new.這使得為一個更穩定的轉移之間的齒輪和為了容納這些新球變速箱鞋已被修改，並因此新。
Source: 資料來源： Mugen 木 [mugenseiki.com] [ mugenseiki.com ]
