August 13, 2018

T-Works YZ series 5.5mm titanium ball studs

Coming from T-Works are new 5.5mm titanium ball studs for the Yokomo YZ-2 and YZ-4 series off-road buggies. The pivot balls are machined from high-quality 64 grade titanium and they are available in sets of two and in 6mm, 8mm, 10mm or 12mm specification – all are direct replacements for the original parts. However, due to being cut from lightweight yet more corrosive-resistant material they scrub both overall weight and unsprung mass.

View the other ball stud sizes here


August 13, 2018

Jones doubles at Joe Buck Points Series Rd2

VCRC Raceway of Terre Haute, Indiana hosted round 2 of the Joe Buck Points Series this past weekend. Tyler Jones was in control of things in both the Nitro Buggy and E-Buggy classes as he grabbed the overall TQ and wins in both categories. Brad Dewey would come in 2nd in the 20-minute Nitro Buggy A-main as Gary Studt rounded out the top 3 results. The 10-minute E-Buggy A-main was pretty much a blueprint of the Nitro main with Tyler taking the win from Brad and Gary.

View the E-Buggy podium here


August 13, 2018

Gunther van Staey takes Belgian 1/8th On-road title

The final round of the Belgian 1/8th On-road Championship was held at the Model Race Genk track this past weekend. Racing conditions on Sunday were pretty challenging due to a lot of dust on the track. Robin D’hondt would take the overall TQ a lap in front of Gunther Van Staey and Yves Zoma. The main final then again saw Robin out in front, taking the win some five laps in front of Gunther Van Staey as Yves Zoma rounded out the top 3 another lap down. With the 2nd place however it was Gunther who secured himself the overall championship.

Source: Serpent [serpent.com]


August 13, 2018

Bradley Baird wins Irish National series Rd3

Round 3 of the Irish National off-road series held once again at BADMCC venue due to a closure from another track. Bradley Baird took his buggies to a double TQ and victory in both Nitro and electric classes. With only one round to go and a disastrous round two its all down to the final round one the all astro venue at the Navan Nitro Nuts circuit.

View the E-Buggy podium here


August 13, 2018

Joona Haatanen takes doubles Finnish Buggy title

The third round of the Finnish 1/10th Buggy Nationals was held at the Joensuu astro turf track over the weekend. In the 2WD Buggy class Joona Haatanen took the overall TQ and he also secured himself the win after the triple A-mains from Karri Salmela 2nd and Jamiel Gabrielsson 3rd. Over in 4WD it was again Joona who excelled by taking the TQ an win from Karri Salmela. Konsta Saarinen would round out the top 3 result. With the win in 2WD and 4WD Joona also brought home the overall titles in both classes.

View the 4WD podium here


August 13, 2018

Yeah Racing M3 aluminium servo washers

Yeah Racing have introduced their new threaded M3 aluminium servo mount washers. The were designed to ensure better and more reliable servo fitment as they fit into the servo’s mounting lugs, making for more evenly spread force while preventing the servo from moving under load or in the event of a crash. the washers come pre-threaded for easier installation and removal and they are available in red, blue or black colour.

View the colour variants here


August 13, 2018

Jörn Neumann wins German Nitro Buggy Nats Rd1

Round one of two of the German Nitro Buggy Nationals was held at the ESV Bischofsheim track this past weekend. After five rounds of qualifying it was Agama’s Burak Kilic with the overall TQ from SWorkz’s Jörn Neumann on the 2 spot. After the 40-minute main final however it was Jörn who took he overall 1st place from Burak on the runner-up spot. Mugen’s Carsten Keller came in 3rd to round out the podium. Elsewhere in the Junior main final it was Burak who took the win.

View the Junior podium here


August 13, 2018

Twister RC T3-01 +1mm aluminium hex adapters

Coming from Twister RC and made for the Tamiya T3-01 Dancing Rider trike are +1mm offset aluminium hex adapters. The clamping-design wheel adapters are made of high-quality aluminium and they come blue anodised and include all needed mounting hardware. Using the offset hexes will increase the overall width of the vehicle for improved rear side bite.

Source: Twister RC [twister-rc.com]