October 30, 2015

KO Propo RSx2 Power HC limited edition servos

KO Propo RSx2 Power HC limited edition servos

KO Propo America have introduced the RSx2 Power HC limited edition servos. Coming as signature limited red version with red anodised centre case and Jared Tebo’s signature and also as limited blue version the servos offer the same specifications as the standard Power HC with up 31.6kg-cm of torque and 0.11s transit time at 7.4V input.

View the other servo here


October 30, 2015

Reedy 2100mAh 14.8V starter box LiPo battery

Reedy 2100mAh 14.8V starter box LiPo battery

New from Reedy comes a dedicated LiPo battery pack for nitro starter boxes. Offering a capacity of 2100mAh the 14.8V softcase pack is of a small footprint at 103x35x28mm and it weighs in at 209g. This makes the battery easy to install and it is barely noticeable during transport to and from the track. A high discharge race of 20C makes for a lot of power while the pre-installed T-plug connector and XH balancer plug allows for easy charging and secure balancing.

Source: Team Associated [teamassociated.com]


October 29, 2015

RPM SCX10 front steering knuckles

RPM SCX10 front steering knuckles

RPM’s new steering knuckles for the Axial SCX10 are designed for the hardcore trailblazer that needs strength and durability to get them through the rugged backwoods without failing. The parts have been designed for strength by first beefing up the steering arm. Also the unnecessary inner tie rod hole was ditched and the amount of material around the remaining tie rod hole was increased. RPM then increased the size of the steering arm supporting ribs and increased the amount of material around the king pin bolt holes for added muscle and stability. The design also sees added clearance on the steering arm for the C-Hub retaining screw, allowing more steering throw without having to swap out to pricey C-Hubs or high-clearance steering knuckles. On top of that the slop in the king pin bolt holes was reduced by 0.13mm, improving steering accuracy and consistency.

Source: RPM [rpmrcproducts.com]


October 29, 2015

HB D413 +6mm chassis, Ackermann set & C-hubs

HB D413 +6mm chassis, Ackermann set & C-hubs

HPI Racing have new option parts for the HB D413 4WD off-road buggy available in the form of a +6mm main chassis, an Ackermann arm set and 15 degree caster blocks. Starting with the chassis, which was used by HB drivers such as Ty Tessmann during the recent IFMAR Worlds, the carbon fibre plate offers a 6mm longer wheelbase for increased stability and it must be used with the +3mm top front and rear top decks. Despite being longer the chassis is good for the use with the standard centre driveshafts. Other new parts include an optional steering Ackermann arm set made from carbon fibre as well as 15 degree caster blocks for the front of the buggy. The items help to fine-tune the steering characteristics for a variety of surfaces.

View the other new parts here


October 29, 2015

Lamberto Collari officially joins Infinity

Lamberto Collari officially joins Infinity

Infinity and parent brand Creation Model have announced the official signing of 9-times record World Champion Lamberto Collari to their team following a recent period of unofficial collaboration between the Italian veteran racer and the Japanese company. His skills, experience, dedication and hard work for sure will be a great asset to the young Infinity brand and Lamberto has the following to say about the deal:

Once again it’s time to renew my challenge. I’m grateful to Creation Model and Infinity team to think at me like a resource to develop their brand new platform. I meet a wonderful team of people really dedicated and friendly. Can’t wait to attend next World’s with my new team mates. See you in Brazil!

Source: Infinity [cm-infinity.com]


October 29, 2015

Max Götzl team up with Xray

Max Götzl team up with Xray

Xray have announced the signing of young and talented Czech off-road driver Max Götzl to their junior team. Max is a long time Xray supporter and a regular winner of the junior categories at national off-road events. Max says:

I’m very happy to be part of the team Xray. I have started with racing in 2009. During this time Xray have been producing the best products for us. With Xray’s cars I was able to grab several junior titles in different categories as well as finishing on podium among the best Czech drivers. I am very happy to be given this opportunity and hope this will help me to improve myself even more. I will race all the main races in Czech Republic including the XWS Czech Republic as well as some international events including EOS, Euros, etc.

Source: Xray [teamxray.com]


October 29, 2015

Exotek Yokomo 1/10 buggy aluminium option parts

Exotek Yokomo 1/10 buggy aluminium option parts

Exotek Racing have new aluminium option parts for Yokomo’s YZ line of 1/10th off-road vehicles available. First up are zero degree rear hubs for the YZ-2 and YZ4. They are machined from 7075 aluminium and sport a vertical ball stud mounting position for easy roll centre adjustments. Extra machining makes the parts light of weight without sacrificing durability and they are utilising an extra hole for using a 3mm set screw on the hinge pin for improved fit. The parts are anodised in factory black and they sport etched Exotek logos.

Continue reading here


October 29, 2015

STRC Ascender aluminium shock parts

STRC Ascender aluminium shock parts

ST Racing Concepts have new aluminium shock parts for the Vaterra Ascender 1/10th off-road vehicle available. First up is a set of threaded shock bodies, lower shock caps, and spring collars. The high-quality and precision CNC-machined shock bodies comes in either gun metal or scale black anodising, or there is the option of having blue anodised collars and lower caps for a more accentuated look. The shock collars come with O-rings inside to accurate hold spring pre-load settings. The lower caps features machined grips for ease of assembly. The shock bodies and accessories come as pairs and are a direct replacement for the standard composite items. Also new is a four piece set of aluminium upper shock caps. Like the spring collars they feature machined grips for easy assembly and they are available in black, gun metal, silver or blue anodising.

View more photos here