March 18, 2020

Kyosho MP10 & MP9 12T/18T steel diff gear sets

Announced just recently by Kyosho’s own Yuichi Kanai and being available shortly are two new 12T/18T differential bevel gear sets for the Inferno MP10 and MP9 series 1/8th scale vehicles. Coming as separate sets for the front/rear and centre diffs, the kits allow to change the differential’s internal gearing from 10T/20T to 12T/18T which has an effect on the differential action, improving the vehicle’s stability over rough or bumpy parts of the track. Included in the sets are precision-made steel gears, steel cross pins as well as shims and drive pins. Source: Kyosho [kyoshoamerica.com]…


February 26, 2020

Kyosho MP10 steel diff bevel gear sets

Via social media Kyosho’s own Yuichi Kanai has announced the soon release of new steel diff bevel gear sets for the Inferno MP10 buggy. Available in two specifications, for the front and rear as well as the centre diff, the IFW621 and IFW622 sets use the same 12T/18T internal ratio as the IFW403 TCD Gear Set for the older specification MP9 platform, meaning the differential action can be fine-tuned according to the track conditions and the driver’s liking. With the diff action meant to becoming smoother, the new diff sets are recommended especially for low grip or bumpy tracks. The…


January 9, 2020

Kyosho Inferno MP10 Spec A nitro buggy roller

Coming soon from Kyosho is the Inferno MP10 Spec A 1/8th nitro buggy roller. The pre-assembled kit out of Kyosho’s Spec A range is built by experienced staff and the kits are individually checked by Inferno designer Yuichi Kanai himself. Areas such as shock absorbers and diffs are built to very high standards to guarantee best performances as are details such as ride height and suspension geometry that all come pre-set and race-ready. On top of this the bodyshell is pre-cut, reducing preparation time significantly. Not included are accessories such as engine, electronics and tyres. As for the specifications the…


November 29, 2019

7075.it Inferno MP10 closed switch cover

Made for the Kyosho Inferno MP10 1/8th off-road buggy is 7075.it’s closed switch cover. Machined from high-quality aluminium and coming with an anodised surface finish for wear and looks, the laser-etched part replaces the standard switch cover with a closed variant for all drivers that scrapped the standard switch over a DIY “plug” solution. Source: 7075.it [7075.it]…


October 4, 2019

Kyosho Inferno Neo3.0 VE 1/8th RTR E-Buggy

Kyosho have announced the soon release of their Inferno Neo3.0 VE 1/8th scale ready-to-run electric buggy. Building on the proven, World Championship winning Inferno platform the factory-assembled buggy offers a full-time 4WD 3-diff drivetrain, widely adjustable suspension components with big bore shock absorbers, and a fully ball-raced drivetrain with machined metal gears for exceptional durability. Other features include front universal driveshafts, a metal module 1 main gear as well as KC Cross tyres mounted on black multi-spoke rims for optimised grip on a wide range of surfaces. The buggy comes including the Kyosho Speed House Torx8 2000kV brushless motor and…


September 30, 2019

Kyosho MP10 HD driveshafts

Kyosho have announced the soon release of their new HD driveshafts for the MP10 1/8th off-road buggy. Available are 94mm wheel driveshafts, 116mm as well as 82mm centre driveshafts all of which are of a CV-style design with protective, red-anodised aluminium caps that both keep the cross pins securely captured while allowing grease to stay inside the assembly for longer, ensuring less wear and reduced maintenance time. The shafts fit the current Inferno MP10 and also the older spec MP9 models. Source: Kyosho [kyosho.com]…


September 27, 2019

T-Works Inferno MP10T titanium optionals

T-Works have announced the release of new optionals for the Kyosho Inferno MP10T 1/8th scale nitro truggy kit. First up is a 64 grade titanium turnbuckle set for Kyosho’s hot new truggy that includes seven links machined of high-quality material, made to reduce overall weight and improve corrosion resistance. Included with the turnbuckles come two suitable wrenches for easy building and setup changes. Also new are two screw sets, a 150-piece 64 grade titanium UFO head kit that will reduce the car’s overall weight while the 155-piece gold-colour steel screw set mainly adds visual impact and corrosion resistance compared to…


September 24, 2019

Kyosho Psycho Kruiser VE 2.0 RTR monster truck

…truck’s extreme level of power – Equipped with 6-spoke wheels & block tyres – Stabilisers and universal joints are equipped on front and rear – Mud guard installed on rear axle provides protection from dirt and mud. Promises stable performance under various running conditions – Resin chassis stiffener as used on the Inferno NEO is installed on front and rear – Full bearing specification features 18 bearings through the drive system and wheels – Large bumper provides protection for the front suspension holders and lower arm plate – Compatible with many optional parts for the Inferno series Source: Kyosho [kyosho.com]…


Tonisport
Mibosport
LC Racing
VP Racing
RCXX
Monaco RC
T-Works
RC Mart