March 5, 2019
Tekno RC have announce the release of two new option parts to improve the longevity of the popular EB410 and ET410 vehicles. First up are new shock standoffs that allow the shock to only pivot between the standoff and bushing, moving the wear surface to the bushing itself and increasing the life of the cap. The standoff are made from high-quality steel, they fit the EB410 and ET410 vehicles and must be used with below’s keyed shock bushings. The bushings are designed to snap in and key with the top surface, making it virtually impossible for the bushing to rotate…
February 13, 2019
Exotek have introduced a set of heavy duty 3.4mm hardened steel inner hinge pins for the Tekno EB410 and ET410 vehicles. The larger centre section helps prevent bent or busted pins while keeping the stock 3mm diameter at the ends in order to fit the stock inserts and while also only slightly enlarging the arm holes to maintain arm strength. The set, that is recommended for experienced hobbyists only, includes four hinge pins and a high speed drill bit to ream the arms to accept the larger hardened hinge pins. Source: Exotek [exotekracing.com]…
January 10, 2019
New from Exotek is a 6061 aluminium rear swaybar mount for the Tekno EB410 buggy. The simple and precise sway bar mount allows to run the popular rear end setups that use the shocks forward and arms reversed. It uses the stock hardware and requires the use of the #TKR6583C shock towers with camber mounts. The part comes polished and glossy anodised for a factory look. Source: Exotek [exotekracing.com]…
January 2, 2019
Coming from Raceform is their V2 electronic tray for the Tekno RC EB410 and ET410 kits. Of a stronger and more durable design the item is made of a new material with stress areas having been eliminated, making for improved overall rigidity. In addition the a new 4-piece design ensures the tray can be rebuild with spare parts if needed. The tray was developed to ensure easy transponder, receiver, speedo and capacitor mounting for a cleaner looking installation and it is a drop fit with no chassis modification required. Features: – Stronger and more durable – Upgraded to new material…
November 30, 2018
Coming from Tekno are several new option parts for their line of 1/10th and 1/8th scale vehicles. First up and coming for the EB410 and Et410 are heavy duty differential outdrives and diff couplers. The new heavy-duty outdrives and coupler retain the same physical dimensions as the standard EB410 and ET410 parts but have less material removed for improved durability and impact resistance. They are recommended when running in harsh conditions. The HD outdrives and diff coupler are also ideal for carpet racing with frequent on-power jump landings. They are made from the same material and are a direct replacement…
November 14, 2018
…diff with heavy-duty hard-anodised 7075 aluminium cups for longer lasting stock racing performance when combined with optional MIP pucks or rollers. The stock TLR 22 bones are not compatible and 67mm length Puck bones are recommended for the 22 4.0. Also new are long titanium steering posts with 2mm head for the Tekno EB410 buggy. The parts eliminate the problem of not being able to push down on the posts when screwing them into the bulkheads with a socket driver. They are lightweight, smooth fitting, heavy duty and help to make maintenance on the EB410 a breeze. Source: Exotek [exotekracing.com]…
October 18, 2018
Klinik RC have introduced a new cooling system for 540-size brushless motor and the use with most 1/10th scale buggies and touring cars. The design forces air through the motor instead of letting it flow around the can for a significant drop in operation temperatures. The cooler is constructed from durable material and it is available in three different design: a 90 degree variant for front motor buggies such as the Schumacher KC and most touring cars as well as an inline version for 4WD shaft buggies such as the Team Associated B64, Yokomo YZ4, Tekno EB410, Kyosho ZX6 and…
October 8, 2018
…tower. Also new are steering arms in gold, blue or black colour as well as a MBX8R radio tray, again available in all three weave colours. Coming for the Tekno EB410 is the SIF “shocks in front” rear tower that allows to recreate the hot new “factory” shock positioning with the shocks mounted in front of the arms. This new tower accommodates that change with ease allowing Factory RC customers to match the rest of their Factory RC colour weave parts. Last but not least come ET410-specific front and rear shock towers in black or blue weave carbon fibre. Source:…
