November 18, 2014

Elliott Boots renews with Reds Racing

Elliott Boots renews with Reds Racing

Italian company Reds Racing announce the re-signing of Elliott Boots for another two years through to 2016. The Kyosho front runner and 2012 IFMAR Worlds top qualifier has the following to say about the deal:

I have been very pleased with the fantastic support from Reds Racing in 2014, on and off track. The engines have been so good this year and with the personal track support from Mario and Marco which has been fantastic. Looking forward to 2015/16 with Reds Racing.

Source: Reds Racing [redsracing.it]


November 18, 2014

Daniel Carlsson wins at South Swedish Indoor Cup Rd2

Daniel Carlsson wins at South Swedish Indoor Cup Rd2

The 2nd round of the South Swedish Indoor Cup was held in Hassleholm, Sweden. The racers faced quite a small but yet technical layout with good grip. Right from the start local driver Daniel Carlsson found himself on top of the timesheets with a 4 seconds margin over the 2nd place driver in practice. Daniel then also lead the qualifying with Markus Hellquist coming in 2nd some 4 seconds behind while Christian Holmström ended the qualifiers in 3rd further 3 seconds down. The finals then were a done deal for Daniel who made a clean sweep in all three legs to take the overall win from Markus and Christian.

Click here to view the top 5 result


November 18, 2014

Norwegian National Winter Series Rd1 – Report

Norwegian National Winter Series Rd1 – Report

The first round of the Norwegian National Winter Series was organised by the Kvinesdal RC Club in the South of Norway with a record entry of over 80 drivers in attendance. Held in the classes of Touring Car Modified, Touring Car Stock 13.5T, Touring Car Recruit 21.5T and 1/12th scale Modified the race format saw three rounds of qualifying with the best result to count followed by triple mains. In the Touring Car Modified class raining Nordic Champion and Schumacher team driver Nikolai Haaheim would secure the overall TQ by topping all three rounds of qualifying. A close 2nd was Team Associated driver Petter Berntsen, Oskar Fjeld (Yokomo) followed in 3rd while Rune Svestol (Xray) came in 4th.

Click here to continue reading the report


November 18, 2014

New Zealand North Island EP Championships – Report

New Zealand North Island EP Championships – Report

The 2014 Edition of the New Zealand North Island EP Champs took place at the North Harbour RC Car Club Track which is situated at the most Northern part of the country’s biggest city Auckland. The event was somewhat of a sombre affair on the knowledge that the track was ear marked to be redeveloped into a swimming complex in a short few weeks after the event. Come qualifying, the weather played ball after months of rain in the region, the sun was out, and so were all challengers for this event.

Click here to continue reading the report


November 18, 2014

Lutz takes E-Buggy win at the Battle of the Sikest

Lutz takes E-Buggy win at the Battle of the Sikest

Last weekend’s Battle of the Sikest saw Tekno RC’s Joe Bornhorst taking the TQ in the 1/8th E-Buggy class over some of the fastest drivers in 1/8th electric racing. Bornhost then would take the opening A-main with a tone to tone victory over Tekno teammate Ryan Lutz who came in 2nd. In the second leg Joe would make a mistake in the first corner to give Lutz the lead. For the next few minutes the entire field would battle it out and Lutz would hold onto to take the win in A2, while Joe finished in 2nd. The third and decisive A-main would have the teammates Bornhorst and Lutz swapping the lead countless times. Side by side for nearly five minutes it would come down to Bornhorst making a mistake giving Lutz the room to take the overall win. With Bornhorst on the runner-up spot Kyosho’s Cody King would round out the podium.

Source: Tekin [teamtekin.com]


November 18, 2014

Cyrul & Lonergan take wins at Halloween Classic Race

Cyrul & Lonergan take wins at Halloween Classic Race

The annual Halloween Classic race was hosted by the famous Gate crew of Cleveland. In the World GT 13.5T Spec class Josh Cyrul (SpeedMerchant), fresh off his win at the IIC in Vegas, went on to dominate qualifying taking TQs in every round. On Sunday, he started from the pole position and just drove away into the sunset. Josh was a full four tenth quicker than the 2nd place car of Brian Wynn (CRC) to take the win in the highly competitive class.

Click here to continue reading


November 18, 2014

Miguel Matias takes Portuguese 1/10th buggy titles

Miguel Matias takes Portuguese 1/10th buggy titles

Last weekend the final round of the Portuguese 1/10th electric off-road national championship was held at the same indoor location the season kicked off earlier this year. The 2WD class title was already decided with Miguel Matias claiming the 2014 championship with a clean sweep ahead of Nuno Roque and Marco Timoteo. In the 4WD class the title was still up for grabs with Miguel Matias and his team mate Bruno Coelho battling for the overall win. Unfortunately due to racing at the IFMAR 200mm Worlds, Bruno was not able to attend the race and so Miguel quite easily won the race from pole position to snatch the 2014 title from Bruno Coelho and Nuno Roque.

Source: Xray [teamxray.com]


November 18, 2014

Marka BD7 floating fan mount & black drive cups

Marka BD7 floating fan mount & black drive cups

Italian company Marka Racing have two new aluminium option parts for the Yokomo BD7 2014 and BD5 available in the form of a floating fan mount and black front spool drive cups. Starting with the fan mount, the CNC-machined 7075 aluminium part offers a special design that minimises the influence on the chassis tweak as only one screw is used to fix the mount to the main chassis plate. The black anodised holder is usable with most of today’s 25mm, 30mm, 35mm and 40mm fans, it weights in at only 2.3g and comes with mounting hardware. The sturdy design allows to mount smaller 25mm and 30mm fans with only one screw to minimise weight gain while larger 35mm and 40mm fans should be fixed with two screws. The part is a direct fit on BD7 2014 and BD5 cars but using the mount on a 2015 spec car requires a mooting hole to be drilled by your own.

Click here to view more photos