Red RC

June 25, 2014

Ricardo Hofmeier takes win at Dutch 1/10th IC nats Rd4

The 4th round for the Dutch 1/10th nitro on-road championship was held at the AMCA track in Apeldoorn. Being very technical yet fast the track requires a good setup for tight as well as fast corners, with tyre wear always being a concern in the final. With some light rain in the morning the actual racing started belayed with the 2nd round of qualification heats on a quickly drying track. After two rounds it was Pedro Rombouts who took the TQ spot, followed by Daan Stuiver, Ricardo Hofmeier and Sidney Blokker.

Click here to continue reading

June 24, 2014

HPI Micro RS4 RTR Bucky Lasek & Sverre Isachsen

HPI Racing have two new bodyshell variants of their iconic Micro RS4 car available. Coming factory-assembled and ready-to-run with everything needed to get the 220mm long racers running, the 4WD micro cars build on the proven Micro RS4 with a 2-belt all-wheel drivetrain, front and rear differentials, front universal driveshafts and coil-over inboard cantilever front shocks. The cars are equipped with replica Method Race GRC wheels, slick tyres and your choice of Bucky Lasek’s #81 and Sverre Isachsen’s #11 Subaru Impreza WRX STI bodyshell. Also included is a 2.4GHz radio system, all needed batteries and a wallcharger.

Click here to view the features and another photo

June 24, 2014

Team Associated Factory Team 7mm short nut driver

Team Associated expand their line of Factory Team tools by a short 7mm nut driver. Lightweight and compact in size the tool saves toolbox space and is ideal for slipper nuts or any other 7mm nut. It offers a comfortable diameter and the knurled surface makes installing and removing fasteners a breeze.

Source: Team Associated [teamassociated.com]

June 24, 2014

Alex Hagberg & Surikarn C. win at FEMCA champs

The 2014 FEMCA Nitro On-road Championships where held at the Jakarta International Twin Circuit in Senayan, Central Jakarta, Indonesia. The race had some 100 entries with drivers from all over Asia to race in the 1/8th and 1/10th 200mm classes. In the 1/8th category Xray’s Alexander Hagberg qualified in 2nd place with a borrowed RX8 as at first he was unsure whether to run the class or not. In the end he even won his semifinal a couple of laps ahead of the 2nd place driver to line up in pole position in front of pre-event favourite Masgo Tanaka.

Click here to continue reading the report

June 24, 2014

Hupo doubles at 3rd round of Austrian nationals

The 3rd round of the Austrian electric off-road nationals took place at the 1-GMAC Litschau track near the Austrian/Czech Republic border with over 50 drivers in attendance. Practice started on Saturday under relatively cold, windy and dusty conditions meaning the 2WD drivers would prefer running rear motor buggies but as warmer and overall more pleasant weather was predicted for Sunday one or the other driver opted to get used to mid motor cars. 2WD qualifying saw a battle between the two Team C drivers Hupo Hönigl and Martin Kreil who both won 2 of the 4 qualifying rounds. Ultimately Hupo was able to take the overall TQ in front of Martin while Team Associated’s Stefan Pfeifhofer rounded out the top 3 with his mid motor B5M.

Click here to continue reading the report

June 24, 2014

Kerswell & Clinch win at BRCA Clubman’s series Rd4

Kerswell & Clinch win at BRCA Clubman's series Rd4

Round 4 of the BRCA Clubman Series came back to the larger track at the Cotswolds. Having a break from the Clubmans for a year, everyone was excited to turn up there motors and see how fast there cars really go with speeds hitting almost 50mph at three points on the track. Round 1 of qualifying started on the Sunday with the sun coming in early and strong with little wind. The track was cleaned up on Saturday during practice but the grass was damp on the morning challenging drivers to stay on the track. In 17.5, Dominic Skinner set provisional TQ just half a second ahead of Gavin Clinch. In 13.5 Chris Gunter topping the time sheet showing his confidence on this fast track with Chris Kerswell behind him by just under a second.

Click here to continue reading the report

June 24, 2014

Max Power Storm 28T nitro truggy engine

Max Power have a new .28 big block nitro truggy engine available in the form of the Storm 28T. Offering a displacement of 4.66cc the 5-port short stroke engine is designed to offer a good amount of torque to cope with the somewhat heavy trucks. A 14mm turbo-style crankshaft runs in high-quality steel ball bearings and the composite material 9mm slide carburettor can be equipped with different diameter venturi inserts. The package is rounded out by a tall yet lightweight cooling head that allows for improved engine cooling even with truck bodyshells fitted.

Click here to view the specifications and more photos

June 24, 2014

Marka Racing T4/T3 & CSO One outdrives & fan mount

Marka Racing have a bunch of new option parts for Xray’s T4 and T3 platform as well as the CSO One available. First up are axle driveshaft adapters made from 7075-T6 Ergal material. Designed for the use with blade driveshafts the parts offer a lower weight compared to the stock adapters and they are available in orange and black anodising. The parts are compatible with Xray T4/T3 and CSO One V2/V3 cars and also fit Team C as well as Spec-R kits.

Click here to continue reading