Red RC

February 11, 2014

Team Associated Factory Team tools & B5 options

Team Associated introduce two new Factory Team tools as well as optional heavy-duty ballstuds for the B5 and B5M buggy. Starting with the tools, available soon are a T-handle 7mm nut driver and a 5.5mm short nut driver. The 7mm wrench is designed for wheel nuts and other 7mm applications while the 5.5mm driver is ideally used for shock nuts and the like. Both tools come hard-anodized and with laser-etched size markings.

Click here to continue reading

February 11, 2014

Miguel Matias doubles at Portuguese off-road nats Rd1

Miguel Matias doubles at Portuguese off-nats Rd1

Last weekend the first ever Portuguese 1/10 4WD and 2WD off-road nationals took place at the ACRP indoor track. The meeting saw 19 entries in 2WD and 27 in the 4WD class. The carpet track had a fast and flowing layout, with a few tight corners, well designed jumps and plenty of entertainment. In 2WD Buggy Miguel Matias totally dominated qualifying, TQ’ing the first 3 rounds. The 2WD finals then were quite eventful and Miguel Matias faced a good challenge from Ricardo Monteiro in the first final, but in the end he won by 2 seconds over Ricardo. In the second leg Matias took the lead again and checked out, handing him an unchallenged win and the overall victory.

Click here to continue reading

February 11, 2014

Revolution Design Ultra Flyheight Tool

Revolution Design Racing Products introduce the Ultra Flyheight Tool for 1/8th off-road vehicles. Made from aircraft-quality 7075-T6 aluminium the tool incorporates a flywheel tool, a clutch gap gauge and a ride height gauge. The shape of the tool allows to securely fasten 3-pin and 4-pin flywheels while fastening the clutch nut and therefore it is the ideal combination with the RDRP Ultra Flywheel Puller. Once the flywheel and the clutch bell are fitted the axial play can be measured and adjusted using the clutch gap gauge. A stepped slot measures the axial clutch bell play between 0.3mm and 0.9mm in 0.1mm increments. On top of that helps to measure the chassis ride height in a range of 20mm up to 40mm by simply placing the tool underneath the chassis plate. 1mm increments make for a precise adjustment while the black anodising and white laser-etched markings give the tool a factory look.

Source: RDRP [revolution-rc.com]

February 11, 2014

Tobias Hepp re-signs with Xray

Xray announce that Tobias Hepp has renewed his contract with the Slovakian manufacturer and that the young German will be part of the Xray factory racing team in 2014. Tobias is an 1/8 on-road nitro specialist and has achieved some astonishing results with the RX8 and will continue to race the car in 2014. This is what Tobias has to say about the deal:

I am very proud to continue to be part of the Xray factory racing team. The RX8 has been working extremely well and the development of the RX8 makes great progress. So my motivation has never been stronger for the upcoming season. Lastly I would like to thank to the whole team for the great team work and support and I am really excited for the 2014 season.

Source: Xray [teamxray.com]

February 11, 2014

Sanwa SRG-HS 1/12th servo

Coming soon from Sanwa is the SRG-HS micro servo for 1/12th scale pan cars. Designed especially for the use with 1S LiPo cells the servo offers a transit time of 0.11s for 40° and a torque of 3.7kg-cm. It is useable with Sanwa’s SSR mode and features ball bearings, metal gears and moulded-on lugs for horizontal mounting.

Source: LRP [lrp.cc]

February 11, 2014

Xray XB4 +2 rear lower suspension mounts

Xray introduce the +2 rear lower suspension mounts for the XB4 buggy. Recommended for the use on carpet and other high traction surfaces, the parts make for improved rotation in and better “drive” through corners. Available as separate front and rear mount, the parts are made from 7075-T6 aluminium, they come black anodised and make use of Xray’s composite material inserts to further fine-tune the suspension geometry. The parts fit both the XB4 4WD and 2WD buggy.

Source: Xray [teamxray.com]

February 11, 2014

Drew Moller signs with Mugen Seiki

Mugen Seiki Racing confirm the signing of Drew Moller through the 2014 racing season. “DrewMo” had an awesome 2013 season with top finishes at the ROAR Nationals, and many other races in America. Now he will join the Mugen USA factory team. Moller will be racing the World Champion MBX7 Buggy, MBX6TR Truggy, and MBX7E ECO E-Buggy at all major events.

Source: Mugen Seiki [mugenracing.com]

February 10, 2014

Dustin Evans wins at Rumble in the Rockies

The 2014 Rumble in the Rockies were held this past weekend at MHOR Raceway in Denver, Colorado, the home track to TLR/Team Orion super star driver Dustin Evans. This year’s event would bring in a total of 210 entries making for a great weekend of racing. In 2WD Modified Buggy Evans was on fire during the first day of qualifying and would TQ the opening three rounds of 2WD Modified Buggy to guarantee him the overall TQ. Evans would have a great battle with Team Associated’s Kody Numedahl who qualified 2nd overall in all three A-Main Events. Evans would come out on top and take the overall win by winning the first and third A-Main.

Click here to continue reading the report