November 14, 2013

RDRP Ultra 1/10 shock O-ring set

RDRP Ultra 1/10 shock O-ring set

New from Revolution Design Racing Products comes the Ultra 1/10th shock O-ring set. The seals are made from a specially formulated compound that is much less prone to “swell” under the influence of silicone shock oil meaning a better seat of the seals within the damper cartridges over a longer period of time. The O-rings also have a lower break away point compared to standard “orange” seals for a more sensitive damper action. The O-rings come in a 16-piece set, enough to equip 8 shocks, and they fit nearly all of today’s 1/10th on-road and off-road shock absorbers.

Source: RDRP [revolution-rc.com]


November 14, 2013

SkyRC Quattro Micro battery charger

SkyRC Quattro Micro battery charger

New from SkyRC comes the Quattro Micro battery charger for the use with many Micro-type batteries. Offering four individual charging ports with LED displays and adjustable charging rates of 0.1A up to 1.0A the ACDC device is ideal for the use with Losi micro battery packs and it also fills the flight batteries of Walkera, MX and mCPX aircrafts if you wish to play around a little bit between the heats during a race. The displays state the capacity, voltage, charging current and the pack’s status while the charger itself features a vast amount of safety features such as short circuit, over current, reverse polarity and DC input voltage protection.

Source: SkyRC [skyrc.com]


November 14, 2013

Avid B4.2 carbon motor centring kit

Avid B4.2 carbon motor centring kit

Avid introduce the Team Associated motor centering kit in a carbon fibre edition. Back in August Avid introduced the B4.2 motor centering kit for vehicles making use of the Team Associated B4.2 gearbox with the set containing a 5mm aluminium spacer to shift the motor, motor plate and slipper 5mm towards the right in order to achieve a near 50/50 left-right chassis balance. The kit is now also available with a super-lightweight carbon fibre spacer for those who wish to scrub every gram from their ride. Included is a 5mm carbon spacer, 5mm slipper spacer and stainless steel mount screws. The kit fits all B4.2, T4.2, SC10.2, SC10B and previous models with the gearbox and layshaft spacer are also available as a replacement set.

Click here to view the replacement spacer set


November 14, 2013

STRC SCX10 shock upgrade kit & rear upper link mount

STRC SCX10 shock upgrade kit & rear upper link mount

Following yesterday’s release ST Racing Concepts have more aluminium option part for the Axial SCX10 available in the form of an aluminium shock upgrade kit and rear upper link mounts. Starting with the shocks, the set allows to convert the truck’s existing shocks from all plastic to threaded aluminium body ones. Included in the set are a pair of precision machined aluminium shock bodies, shock collars and lower shock caps to replace the kit’s plastic parts. The set is available in black, gun metal, green and silver colour as is an optional set of four faux reservoirs to match with the shock bodies. Also new is the CNC-machined aluminium rear upper link mount that provides a solid foundation for the rear upper suspension links. Featuring four holes for installation on the rear axle the machined part adds rigidity while looking great at the same time. Available in anodised black, gun metal, green and silver.

Click here to view more photos


November 14, 2013

Dynamite Prophet Sport LiPo & NiMH chargers

Dynamite Prophet Sport LiPo & NiMH chargers

Horizon Hobby introduce the new line of Dynamite Prophet Sport LiPo and NiMH chargers. Starting with the Prophet Sport Plus the AC/DC charger offers up to 5A charging current or 50W charing power for 1S to 6S LiPo or 4-12 cell NiMH batteries. It features an internal balancer, comes with a JST/XH balancer board and a pre-wired EC3 charging harness. Also new is the Prophet Sport Li-Po charger, made for the use with 100-240VAC input and 2S to 3S LiPo packs. The charging current is selectable from 0.5A up to 3A and incorporated in the red case are 2S and 3S XH balancing ports to do away with the need to use an additional balancing adapter. Building on the same case as the Sport Li-Po charger is the Sport NiMH, the device again makes use of 100-240VAC input and it is build for the use with 4 to 8 cell NiMH packs. The charging current is selectable from 1A up to 4A and the charger comes pre-wired with an EC3 connector.

Click here to view the other new chargers


November 13, 2013

Tom Cockerill wins at Silverstone Winter Series

Tom Cockerill wins at Silverstone Winter Series

This weekend was the second round of the popular Silverstone Winter Series. With 15 heats it was sure to be a busy day, 100+ drivers in the 2WD class alone. Competition was very high with several regular national A finalists in attendance along with some good 8th drivers who enjoy a bit of 10th in the warmth during winter. The club had laid an excellent track with plenty of jumps creating the off-road feeling, a “love it or hate it” slippery section, tight twisty sections and some nice flowing fast corners.

Click here to continue reading


November 13, 2013

RDRP Kyosho 1/10 big bore shock preload nut set

RDRP Kyosho 1/10 big bore shock preload nut set

The Revolution Design Racing Products shock preload nut set is designed to replace the standard aluminium nuts on Kyosho’s 1/10th big bore shock absorbers such as found in the RB6, RT6 and ZX-5 kits with larger diameter and easier to use parts. Included in the set are four CNC-machined 7075-T6 aluminium nuts that sport an updated design to allow for better and easier ride height adjustment. The black design corresponds with the other RDRP parts for the RB6 while white logos and markings make for a cool factory look. Included with the nuts also come four suitable rubber O-rings to limited the movement of the nuts, preventing them from unwanted movement during the race.

Click here to view the parts in place


November 13, 2013

Tekno titanium-nitride coated shock shafts

Tekno titanium-nitride coated shock shafts

Tekno RC have new optional steel shock shafts for the their 1/8th and 1/10th line-up of kits available in the form of titanium-nitride coated shock shafts. The precision machined steel shafts come coated with a hard-wearing and ultra slick surface for a smoother shock action over a longer period of time compared to standard shock shafts. Available as long and short version the parts fit EB48, NB48 and SCT410 based vehicles and also the upcoming ET48 and NT48 trucks.

Source: Tekno [teknorc.com]