November 19, 2011

Volker takes opening qualifier at ATS

Volker takes opening qualifier at ATS

Current Euro Touring Series Champion Ronald Volker has taken the opening round of qualifying for the Asian Touring Series pilot race, the factory Yokomo driver running 19 laps in 5:11.104 to top practice pace setter Juho Levanen by 3 seconds. The German ace described the run as ‘clean’ and said while his LRP powered BD5 WXi was good there was room for some small improvement which he feels if made would allow him to push that little bit harder.

View the complete event coverage here.


November 19, 2011

Matsukura sets early pace at Asian Touring Series

Matsukura sets early pace at Asian Touring Series

Current Japanese Touring Car Champion Naoto Matsukura is the early pace setter at the Asian Touring Series pilot race that is being held this weekend at the world famous Yatabe Arena as part of the grand opening of the recently extended facility that features no less than four indoor tracks. Organised by the same crew that are behind the hugely successful Euro Touring series which kicked off its fifth season two weeks ago in Germany with a record entry, the first ATS event has attracted drivers from 14 countries including a number of Europe’s top drivers and official factory entries from Xray, Yokomo, Kyosho and Awesomatix.

View the complete event coverage here.


November 18, 2011

Introducing Pulse RC

Introducing Pulse RC

Pulse RC is a new Germany-based RC-Car option parts brand founded by Vampire Racing owner Sven Rudig. Pulse RC will soon introduce RC-Car bodies  for almost all classes and scales such as on-road and off-road, 1/12 scale, 1/10 scale and 1/8 scale. The first body that will become released will be for Team Durango’s new DEX210 2WD off-road buggy. A preproduction version was already successfully tested at the recent Indoor Dirt Race in Germany.

Source: Pulse RC [pulse-rc.de]


November 18, 2011

Robitronic Dirtbags

RobitronicDirtBagCrawler

The Robitronic Dirtbags help to keep the trunk or back seat clean as they are designed to enclose the most dirty parts of off-road vehicles such as the tyres and chassis. The synthetic fabric the bags are made of are easy to clean with water and soap and even prevent water and oils so sip through. The bags are available in four sizes for Crawlers, 1/8 scale buggies, 1/8 scale truggies and monster trucks as well as large scale vehicles.

Click here to view the sizes


November 18, 2011

Serpent Cobra option parts

SeprentCobraRearUprightsV2

Serpent announce new option parts for the Cobra 1/8 scale off-road buggy and truggy in the form of aluminium uprights, a Cobra-Be hard anodised chassis plate and titanium shock bolts. The aluminium V2 left and right uprights are CNC-machined from aluminium, come specially coated and include Delrin bushings to use the smaller bearings of the Cobra buggy and truggy. On the Cobra-Be the original larger bearings are used. Made for the Cobra-Be in question is the new 3mm hard anodised aluminium chassis. CNC-machined from 7075-T6 aluminium and specially coated the new 3mm chassis withstands rutted tracks better. It also is slightly stiffer than the original chassis to add another tuning option. The third new part are the lower shock bolts machined from titanium and light of weight. The are useable on the whole line of Cobra kits and come as set of four.

Click here to view the other new parts


November 18, 2011

Exotek announce more Tamiya options

Exotek-417XSchassis

Exotek Racing have announced new option parts for the Tamiya TRF417, TA-05,  as well as the Exotek F103 and F103 chassis conversions. Made for the TRF417 is the new ultra narrow and extra soft 417XS chassis plate. Aggressively shaped and 2.25mm thick for added flex the main chassis sports extra cut-outs in the rear section for more controlled flex, more tyre performance and maximum grip with controlled tyres. The plate accepts 7.4V flat bottom LiPo batteries.

Click here to continue reading


November 18, 2011

Tasos Paparegkas wins Greek Nitrofest 2011

GreekNitrofest2011

The new Top RC track in Thesaloniki, Greece was the host of the 2011 Greek Nitrofest. A total of 30 drivers attended at the three day event that not only attracted lokal drivers but also one Joseph Quagraine from far Finland. Tasos Paparegkas took TQ with his Xray XB808 ’11 followed by John Paparegkas (Xray XB808 ’11) and Joseph Quagraine (JQ THE Car). The 45 minutes long final was a close affair with many lead changes between Paparegkas and Quagraine with the better end for Tasos who won the race by 9 seconds in front of Joseph and John.

Source: Xray [teamxray.com]


November 18, 2011

LRP A.i. Runner Reverse V2 controller

LRPAiRunnerReverseV2

Team Associated announce the LRP A.i. Runner Reverse V2 brushed speed controller. The revised speedo is 100 percent waterproof and features LRP’s exclusive True Automatic technology, that makes push button setup completely unnecessary. The speed control immediately learns the individual transmitter settings right after it is switched on and is perfectly set up for every run with the correct neutral, full- speed forward, and full-speed reverse transmitter settings. The controller also incorporates a build-in fail safe to bring the car to a halt in case of an interference, empty transmitter battery or if the model is outside the radio range.

Source: Associated [rc10.com]