T-Works have introduced a set of titanium shock standoffs for the Tekno EB410 buggy. Includes are upper titanium shock mounts as well as POM shock cap bushings with all parts reducing weight over the standard items for an overall lower centre of gravity while adding precision at the same time. The set includes four shock standoffs and four POM bushings and it is a direct fit on the EB410 buggy. Source: T-Works [rc-tworks.com]…
T-Works have introduced a 4-piece set of titanium king pink screws for the Tekno EB410 buggy. The fasteners are made of high-quality 64 grade material for a low weight and exceptional corrosion resistance. Using the king pins in place of the original parts will reduce unsprung mass for increased suspension efficiency and an overall lower weight. Source: T-Works [rc-tworks.com]…
Coming from Trinity is a range of new aluminium option parts for Tekno RC’s popular EB410 1/10th scale 4WD buggy and the new ET410 4WD truck. First up is a bulkhead camber saver plate that was designed to strengthen the front bulkhead area. The part comes including mounting hardware. Next up is an aluminium steering rack and bellcrank set that replaces the standard composite parts with sturdier parts in order to eliminate any possible steering failures and to achieve a more precise steering feeling. The set includes two steering bellcranks and the Ackermann plate. Also new and made to replace…
Coming from Pro-Line and made for the Tekno EB410 1/10th scale 4WD buggy is the Elite body shell. Designed with the latest in CAD technology, the Elite features an overall low-slung design with sweeping lines throughout giving it an unmistakable look on the track. A laid-back cab-forward design with rails extending up the hood and A-pillar provides enhanced steering feeling while a sloped centre fin balances out the rear of the car with exceptional side-bite. Air scoops on both sides of the cab have been placed strategically to give maximum cooling effect on the electronics and the cab height was…
Following a couple of teaser images on social media, Tekno RC have officially unveiled their all-new ET410 1/10th scale 4WD competition electric truggy kit. The vehicle is based off of the popular EB410 1/10th scale 4WD buggy, however new suspension arms, shock towers, rear shocks, body mounts, an ET48.3 inspired truggy body, and driveline components push the ET410 out to 1/10th 2WD/4WD truck specifications. All of the innovations from the EB410 buggy are present on the ET410, such as the weight-forward chassis layout and differential design, the reverse bellcrank steering system and 13mm big bore shocks. During testing it was…
Exotek have introduced their new aluminium +5mm wing mount for the Tekno EB410 buggy. Extra durable but machined to weigh in at a lightweight 15.8g, the +5mm wing mounts raise the wing 5mm higher for better tyre clearance and improved downforce. They were designed for the use with carbon fibre shock towers which uses the stock wing spacer and hardware to mount the wing but they can be mounted also on the stock plastic shock tower if four optional 2mm tall spacers are used on the shock tower screws. Source: Exotek [exotekracing.com]…
Coming from T-Works and made for the Tekno RC EB410 buggy are DLC-coated suspension pins. Available separately as 3×54.2mm suspension, 3x30mm front or 3x28mm rear variants, the shafts are machined from high-quality steel and they are finished using the same DLC coating that is used by many engine manufacturers to produce a slick and low-wearing surface. Also available is a full 8-piece set. Source: T-Works [rc-tworks.com]…
T-Works have introduced a POM shock cap bushing set for the Tekno RC EB410 buggy. The parts are a direct replacement for the standard plastic items, they come in sets of four and are meant to offer greater precision and durability. Source: T-Works [rc-tworks.com]…
