May 29, 2011

Capricorn LAB-C801 copper engine blocks

Capricorn LAB-C801 copper engine blocks

Capricorn have released this new pair of engine mounts for the LAB-C801 chassis made machined from a copper material. Both blocks add 40 grams in this optimal position to help improve the car’s centre of gravity and double the heat dissipation between the engine and chassis compared to the standard kit blocks.

Source: Capricorn [capricornrc.com]


May 29, 2011

Race for a Cure – Announcement

Race for a Cure - Announcement

The organisers of the second annual ‘Race for a Cure’ got in touch to tell us about this year’s event that runs from the 17th-19th of June at the Goshen Fairgrounds in Goshen CT. It is a wonderful event combining a good old fashioned New England Country Fair along with an exhilarating RC offroad race. Several popular classes are being run including nitro buggy & truggy as well as 1/8th scale electric and various short course classes. This is a real must-do event and best of all it helps raise money for the American Cancer Society and have fun at the same time. More information can be found here (PDF).


May 29, 2011

Teddy Syach wins rain effected Rd4 in Indonesia

Teddy Syach wins rain effected Rd4 in Indonesia

The 4th round of the Indonesian 1/8th scale national championships was held recently in JITC Senayan circuit, Jakarta. The weather was cloudy from the start of the race and the qualifying had to have the second heat re-run due to rain. It was Teddy Syach who took his Mugen MRX5 to pole position setting the only 20 lapper @ 5.15, followed by Toni Kundjung (Mugen MRX5) with a 19 laps @ 5.02. Xray drivers, Sadikin Sutrisno and provisional standings leader Bowie Ginting took 3rd and 4th place respectively with a very close gap of 0.048 seconds. Suwardi Suliandy (Xray) completed the top 5. Seven minutes into the grand final, the rain suddenly came down hard and forced the organizer to stop the race. Because there wasn’t 75% race distance run yet, the result was taken from the qualifying result.

View the final standings here


May 29, 2011

1st Annual Mid Summer Shootout – Announcement

Coyote Hobbies got in contact to tell us about the 1st annual mid summer shootout that will run at their facility on the 30th of July. The event is run indoors and is open to a wide range of classes for SC, truck and buggy in both 2wd and 4wd as well as 1/8th electric buggy. Full event information and entry forms can be found here.


May 28, 2011

Roche carbon cooling fan protectors

Roche carbon cooling fan protectors

New from Roche are these wicked looking carbon cooling fan protectors. Available in three different versions, 25mm, 30mm & 40mm, they mount to the top of your speed controller’s cooling fan, using the same holes and screws. They not only look great but will protect the fan from large debris or cables falling onto the motor and stopping it.

View the mounted protector here


May 28, 2011

Xray Column – Racing Season ‘11 Full Running

Xray Column – Racing Season ‘11 Full Running

The 52nd installment in the Xray column from Xray owner and chief designer Juraj Hudy is now online. In this months column, Juraj talks about this year’s races so far with a focus on their 1/8th scale World Championship debut with the new RX8 chassis.

Considering that some of the drivers only got their cars a few days before leaving for the Worlds, it was no surprise to see some of them building or finishing the car at the track. We handed out some of the last-minute new option parts for set-up tuning to all the team member, and then got to work.

Read the full column here.

Source: Xray [teamxray.com]


May 28, 2011

Pro-Line’s new ‘Dirt’ track

[youtube]http://www.youtube.com/watch?v=CdNgn-YzUyY[/youtube]

Pro-Line Racing have published a video showing their new 1/8th offroad and Short Course track at their premises in Beaumont, California. Designed and built by superstar track builder Joey ‘The Dirt’ Christensen, it incorporates two layouts, a smaller infield section for Short Course, while the 1/8th scale cars take in the outside perimeter which is bigger and features larger jumps. Aside from Pro-Line using it to help develop their future products, we can also expect some races to be held on this track in the near future so we will let you know when that happens.


May 27, 2011

Xray sign Ales Bayer

Xray sign Ales Bayer

Xray have announced the signing of top Czech driver and multiple junior national champion Ales Bayer to their team. The former Losi driver, and brother of European finalist Martin Bayer, Ales will run his XB808 buggy and XT8 truggy at all upcoming National and International events.

Source: Xray [teamxray.com]