January 16, 2018
MIP have introduced a shock cartridge spacer kit for the Tekno RC EB410 1/10th 4WD buggy. The stock shock cartridge setup uses two X-ring seals that ride against themselves. As they aren’t designed to be stacked together they tend to roll during shock compression and they will act like a pump or vacuum, and pull air into the shock body which will make shock bleeding after every run necessary. This is where MIP’s shock cartridge spacer kit steps in. It includes eight spacers which will eliminate the need to constantly bleed the shocks. The spacers keep the same friction on…
January 15, 2018
Revolution Design Racing Products have introduced their new brass C and D suspension mounts for the Tekno RC EB410 1/10th scale 4WD electric buggy as well as a dedicated rear brass weight. Starting with the suspension mounts, they are a direct replacement for the kit’s lightweight aluminium part and add valuable weight especially when running in low-traction conditions or when the track is getting bumpier. Machined from black-coated brass and sporting gold-colour chamfered edges the parts, that can be used separately or in combination, shift the weight bias further to the rear which also helps with rotation into corners especially…
January 9, 2018
Revolution Design Racing Products from Germany have introduced a range of carbon fibre option parts for the Tekno RC EB410 buggy. First up are a total of three front and rear shock towers. The direct replacement shock stays are coming as standard geometry front and rear tower as well as -2mm rear variant, all three are designed to replace the standard composite plastic shock stays with sleeker and cooler looking variants. While the standard geometry front and rear towers are machined to kit specification features the rear -2mm variant an updated geometry that bring the droop settings back to standard…
January 9, 2018
Coming soon from MIP and made for the Tekno RC EB410 1/10th 4WD buggy is their new Pro4mance chassis bundle kit. The next generation 13.5 performance bundle chassis kit rebalances the car to give a stable and smooth drive. The new chassis re-configures the battery to the back of the chassis and lays the servo down. The end result is a more balanced weight between the front of the chassis and back resulting in a smoother drive and allows the car to rotate through corners better, brake faster, and accelerate quicker than standard EB410’s. The kit also features new carbon…
January 5, 2018
Tekno RC have announced a lightweight body and wing for the EB410 1/10th scale 4WD buggy. The new 0.5mm body and 0.8mm thickness wing maintain original kit styling while reducing the material thickness. When combined, the body and wing achieve a savings of 20-grams versus the stock parts which lowers the centre of gravity and improves vehicle handling and acceleration on all track surfaces. The parts are available separately from now on. Source: Tekno RC [teknorc.com]…
December 29, 2017
Exotek have introduced a brass rear weight set for the Tekno EB410 buggy. Made of brass and black coated to reduce corrosion, this weight set is designed to easily bolt on to the rear of the EB410 with an extra low profile. The main weight is 40g and included are two add on 8g weights so that drivers can tune the rear weight of the buggy as needed. The weight set is also slightly angled off of the chassis to maintain chassis flex. Sold separately are additional 8g weights to add extra grams if needed. Source: Exotek [exotekracing.com]…
December 14, 2017
Coming from Exotek and made for the Tekno RC EB410 buggy are a couple of new optional parts. First up is a machined heavy duty 81T spur gear and mounting plate set for the stock centre gear diff. The much stronger machined delrin spur gear reduces the chances of stripped gears and includes the machined 7075 mounting plate with hardware. The 2-piece design also makes for quick and easy spur gear changes as owners do not have to open the gear diff and remove the outdrive, or refill the oils. In addition the alloy mounting plate provides cooling of the…
December 13, 2017
…two young superstars in the Modified Short Course class between Team Associated’s Spencer Rivkin and Team Associated’s Alex Kosciuszek. The wizard would take the TQ in qualifying, but Spencer would shine in the 8 minute main. AE’s Matt Cline finished 3rd to take the final spot on the podium. With the new EB410 wheeler on the market, we’re starting to see more of Tekno’s Joe Bornhorst at 1/10th races. No stranger to 4WD SCT trucks, Joe took the TQ and win with Kevin Thomas 2nd and a very talented and young Joshua Alfaro 3rd. In 40+ Modified Buggy the King…
