February 10, 2014

RSD TC6.2 bumper and brace kit

The RSD TC6.2 bumper and brace kit from Reflex Racing is designed to add front end protection to the Team Associated TC6.2 car. By raising and elongating the bumper brace, the brace now butts up against the front bulkhead providing support to the bottom bumper screws, preventing chassis de-lamination in hard frontal collisions. Included in the set are a new foam bumper, the upper carbon fibre bumper brace and mounting hardware. Source: Reflex Racing [reflexracing.net]…


January 9, 2014

Smokem Racing TC6.2 spool cups

Smokem Racing have released their new spring steel spool cups for the Team Associated TC6.2 and TC6.1. Made from Smokem’s own spring steel formula, these claim to be some of the toughest wearing drive cups available on the market today. They are further hard coated to increase durability. Ready for use without blades it provides a smooth yet reliable setup as blades can break or wear during use which has a big effect on the handling during a run. Source: Smokem [smokem-racing.com]…


December 12, 2013

Juho Levanen re-signs with Team Associated

Team Associated and Reedy announce that Juho Levanen has signed a contract extension which will see him continue with the brands that he has been with since 2001. Juho will race Team Associated’s 12R5.2 and all-new TC6.2 touring car with Reedy Sonic 540 Mach 2 motors, Reedy Competition LiPo batteries, and the all-new Reedy ESC. In addition to his on-road racing duties, Juho will contest the remaining three rounds of the 2013-14 European Offroad Series. His hard-charging driving style and familiarity with high-grip racing surfaces will surely mean a successful transition to this highly competitive discipline. According to Reedy department…


November 11, 2013

Associated RC10 TC6.2 Factory Team kit

Seen at the recent ETS Rd1 the RC10 TC6.2 Factory Team kit builds on the very successful ROAR and BRCA national championship-winning TC6 platform and adds many performance-enhancing upgrades which take the chassis to the next level of performance. New for the TC6.2 is the updated bulkhead, top plate and chassis configuration that allow flex to be optimized by disconnecting the drivetrain bulkheads and suspension mounting systems. This new arrangement allows a predictable flex through the entire length of chassis, giving maximum grip on any track surface. At only 88mm wide and 2.25mm thick, the new TC6.2 carbon fiber chassis…


November 1, 2013

Hébert wins at 2013 Helloween Classic

…Keven set the fastest time in each of the four rounds of qualifying in both classes he competed in. Starting at the pole in the Modified TC main with his Reedy-powered TC6.1 prototype, Keven built an early lead that slowly grew to nearly five seconds by the time he crossed the finish line at the end of the 6-minute race. The 1/12 Modified main followed the same script. Keven’s lead was over a lap by the three-minute mark and grew to nearly three laps by the time Keven took the checkered flag for the win. Myron Kinnard faced a heated…


November 1, 2013

Team C TC6.1 chassis protection labels

These chassis protection labels from Team C are made for the Team Associated TC6.1 touring car. Available in three different colour schemes and without any additional logos they are ideal to protect the bottom side of the car’s carbon fibre chassis from scratches when running on abrasive surfaces such as asphalt or concrete. They also come in handy to improve the overall look of the car. The labels come pre-cut and are ready for application. Source: Team C [teamcracing.net]…


October 20, 2013

Keven Hebert double at 2013 IIC

…rounds of qualifying, Keven started on the pole position in Super Stock 13.5 and in the third position in 1/12 Modified. Driving his Reedy-powered 12R5.2, Hébert took control of the 1/12 Modified A-final just past the one-minute mark and never looked back. With no serious challenges, he was able to comfortably win the class for the second year in a row and claim the IIC championship belt. The pole position start in Super Stock 13.5 TC allowed Keven to drive his Reedy-powered TC6.1 Factory Team prototype to an early lead. Unchallenged, Keven took the wire-to-wire win to earn his second…


August 14, 2013

Smokem Racing TC6MX carbon chassis

Smokem Racing introduce this optional carbon fibre chassis for the Team Associated TC6 and TC6.1 touring car. Called the TC6MX the chassis offers additional flex, delivering more grip and a wider tuning window. This allows the driver to dial-in the car over a wider range of temperature and track conditions. The 2.25mm thick chassis features distinctive curved shoulders that enhances the flex characteristics of the chassis compared to the stock TC6 and TC6.1 designs. As a result, the TC6MX delivers unparalleled handling response during quick direction changes and turn-in, while maintaining maximum stability on corner exit. Source: Smokem [smokem-racing.com]…


Tonisport
Mibosport
LC Racing
VP Racing
RCXX
Monaco RC
T-Works
RC Mart