Red RC » RPM

November 17, 2010

RPM SC10 Rear axle carriers

New for the SC10, RPM have released this rear axle carrier using the larger outer bearings found in Associated’s #9730 axle carriers. The larger outer bearing supports the axle better, providing over 1/16′ more axle contact than two 3/16′ x 3/8′ standard bearings, for smoother, longer lasting performance. With the larger outer bearing and RPM proprietary materials, they found the perfect blend of strength and durability for a whole range of Associated 1/10th scale electric vehicles.

Source: RPM [rpmrcproducts.com]

September 30, 2010

RPM Slash 2wd adjustable body mounts

RPM have released adjustable body posts for the Traxxas Slash 2wd, designed for durability and strength while still allowing you to change the body height on the truck. The unique body post mounting system allows the option of using the stock body height on the chassis. The body can also be lowered as much as 3/16” or raised as much as 3/8” simply by moving the posts up or down on the mounts. This simple, yet clever design is strong enough to handle the toughest of conditions while still allowing enough flex to absorb impacts that could otherwise damage other more fragile internal components of the chassis. Everything about the body mounts and posts are beefier than stock, from the thicker than stock screw mounts to the twin screws holding the body posts on to the mounts. They also use an I-beam shape throughout each mount, which provides the strength these parts need for those less than perfect landings.

View the rear body post here

June 23, 2010

RPM Adjustable Height Slash 4×4 body mounts

RPM’s new adjustable height body mounts for the Traxxas Slash 4×4 are designed to give you optional body height positions where stock left you none. This version of the Slash 4×4 body mount starts off lower than stock by 1/8” (or approx. 3.2mm) and they supply a pair of molded spacers to allow you the option of a stock height body position using the thin spacer under the body mount. If monster suspension travel is needed or you just like the higher stance and larger wheel well openings a taller body mount provides, you can increase the height by 1/8” using the thicker of the two spacers. In extreme cases, both spacers may be used for a full 1/4”* (6.35mm) of extra body height. Engineered with new, larger ribs into the mounts to provide extra rigidity and support for the body while keeping weight to a minimum.

Source: RPM [rpmrcproducts.com]

June 15, 2010

RPM Traxxas shock wrenches

RPM have introduced shock body and cap wrenches for the Traxxas line of 1/10th scale shocks. Molded from one of their secret blends of nylons, it makes them a perfect choice to keep those expensive aluminium shocks from getting scuffed up from metal tools. The Body Wrench slips effortlessly over the body of the shock while the hex of the shock body seats in an upper recess. The Cap Wrench then slips over the shock cap and with a simple twist of the wrist, the cap easily unscrews off of the shock body. No extra tools required and virtually no possibility of scuffing up or damaging the body or shock cap. RPM Shock Body and Cap Wrenches are designed for use on most 1/10th scale Traxxas shocks including the aluminium ‘Big Bore’ versions. However, they will not work with Traxxas Revo or Jato shocks.

View the tools in action here

May 25, 2010

RPM Blitz in-line steering blocks

We reported previously on RPM’s new rear bearing carriers for the HPI Blitz and Firestorm lines of vehicles that incorporated 5x11mm bearings, improving durability and performance significantly. That same bearing size is now available for the front end of those same vehicles, with their new in-line steering blocks incorporating a 5x11mm bearing, which has nearly twice the dynamic load rating as the stock 5x10mm bearing, making a strong truck nearly bulletproof. These blocks incorporate all stock geometry for a perfect fit and are molded from the company’s ultra durable blend of nylons for a significant improvement in durability and strength as well.

Source: RPM [rpmrcproducts.com]

March 25, 2010

RPM Blitz rear bearing carriers

RPM Products have release rear bearing carriers for the HPI Blitz & Blitz ESE. To improve the overall stength of this area, they gave the part a bearing overhaul. The stock bearings are a 5×10mm design, which they claim is not strong enough for racer’s demands, so these new RPM carriers use a 5×11mm bearing, doubling the dynamic load rating from 44kgf to 73kgf. Made from RPM’s bulletproof blend of super strong nylons, they are factory backed with the company’s industry renowned breakage warranty.

Source: RPM [rpmrcproducts.com]