Team Losi have introduced these new 1/8 wheel adapters for the 1/10 Strike short course truck. The set, which includes new axles that allow for simple changes between the stock wheels and 1/8-scale wheels without having to change the axles, allows 1/10 Strike SCT owners to benefit from the increased performance of 1/8-scale tires and wheels. Produced with a black anodized finish on all parts offers great looks and increased durability.
Source: Losi [losi.com]
AKA have announced the release of pre-mounted tires on their Pro-5 wheel specifically aimed at the Short Course market. They have chosen the Cityblock and Crossbrace as their first release on these wheels, which in the Super Soft compound yielded the best results in a variety of conditions during our testing. These Pro-5 pre-mounts also utilize AKA’s innovative and often imitated ground, closed cell inserts for the ultimate in durability and performance. These are a great add-on to sell with their Short Course adapter sets for the Slash and the Associated SC10.
Source: AKA [raceaka.com]
For those looking for better handling and a wider tire selection for their HPI Blitz and Traxxas Slash 4×4, AKA is happy to announce the release of their 1:8 wheel adapters. Made from 7075 aluminum and hard anodized, these wheel adapters are a great addition to either of these trucks. Supplied with all the necessary parts, including AKA ‘SureGrip’ 17mm nuts to keep the wheels securely on the hubs the adapters install in just minutes and require zero modifications to the truck and the stock width and steering radius are kept in tact. Improve your tire choice and handling , all popular 1:8 buggy wheels can be used including the AKA Pro-5 wheel.
Source: AKA [raceaka.com]
New from Pro-Line for the Slash, Slayer, Blitz and SC10 is the Caliber SC tire. The Caliber takes tire technology to the next level by optimizing traction, control, balance, and tire wear with its dual-stage design. The smaller top pin penetrates through loose dirt while delivering unbelievable side and forward bite. The base pin works as a support for the top pin while acting as a dual-stage design once the top pin is worn down. You can rely on the base pin for greater tread life wear and it works well on those tracks that are prone to blue-groove or have a super clean surface. Also new, to work with Caliber SC and other SC tires, from Pro-Line is the the Split Six one piece wheel, whose design is the staple look of short course vehicles. Until now, it’s only been available in a 3 piece bead-loc design, but now it is offered in a lightweight one-piece glueable design that’s more affordable and completely performance driven.
Source: Pro-Line [prolineracing.com]
AKA have announced the release of their Pro-5 1:8 buggy wheel aimed at the Short Course truck segment. The Pro-5 wheel is designed to use standard 1:8 buggy tires, but retain the scale look of Short Course trucks. This makes it a perfect compliment to the AKA 1:8 Wheel Adapters for the SC-10 and Slash SC trucks or a great ‘dress-up’ item for any buggy. Manufactured in the USA, it features a zero off-set, 17mm hex and will fit all standard 1:8 buggies, the Associated SC8 and the SC10 or Slash using the AKA adapters for those trucks. The five spoke design with the chrome accented bead lock really captures the essence of the SC trucks while offering the flexibility of fitting all the current buggy tires on the market.
Source: AKA [raceaka.com]
ST Racing Concepts have released this new 17mm hex conversion kit that allows Associated SC10 short course truck owners to put on high-traction 1/8th scale buggy tires for increased performance and wider range of tire selection. Each piece of 17mm hex adapters is machined out of high-quality aluminium, and using a unique set-screw behind drive pin design, you’ll never have to worry about loosing a drive pin. The rear 17mm hex are offset slightly wider to provide the SC10 truck with more stability in the rear. Available in Blue, Red and Silver.
For those looking for better handling from their SC10, AKA have expanded their line up of 1:8 wheel adapters to now include the Associated SC10 truck that allow you to mount regular buggy wheels to your truck. Made from 7075 aluminum and hard anodized, they are supplied with all the necessary fasteners to mount them and include AKA “SureGrip” 17mm nuts, which are also available to buy separately, to keep the wheels securely on the hubs. The wheel nuts are made from 7075 aluminium and also feature hard anodizing plus a knurled rear face to grab the plastic of the wheel and stay put. The adapters install in just minutes and require zero modifications to the truck and the stock width and steering radius are kept in tact. All popular 1:8 buggy wheels can be used including Associated SC8 wheels.
For those looking for better handling from their Slash, AKA have announced the release of their 1:8 wheel adapters for the Traxxas Slash truck that allow you to mount regular buggy wheels to your truck. Made from 7075 aluminum and hard anodized, they are supplied with all the necessary fasteners to mount them and include AKA “SureGrip” 17mm nuts to keep the wheels securely on the hubs. The wheel nuts are made from 7075 aluminium and also feature hard anodizing plus a knurled rear face to grab the plastic of the wheel and stay put. The adapters install in just minutes and require zero modifications to the truck and the stock width and steering radius are kept in tact. Adapters will ship starting the week of August 10th.
Source: AKA [raceaka.com]
