Friday, February 15, 2008
Team Associated 12R5 1/12th scale团队相关12r5 1/12th规模 Categories - Team Associated, Electric On Road, Cars, Products , trackback
Last week during our Toy Fair coverage we brought you上星期在我们的玩具，公正的报道，我们给你们带来了 more information更多信息 , including ，包括 close up关闭 shots, of the new 12R5 1/12th scale from Team Associated.杆，新的12r5 1/12th规模从小组相关。 The US based company have today released complete information on the new car along with a features list and photos.该总部设在美国的公司有今天公布完整的资料，就新的汽车随功能列表和照片。 The 12R5 Factory Team is the latest evolutionary step in Associated’s over twenty-five years of 1:12 scale racing history.该12r5厂队是最新的循序渐进的步骤，在相关的超过二十五年的1时12规模赛车的历史。 The designers in Area 51 built the 12R5 on a 2.5mm woven carbon fiber chassis that utilizes a pivot-ball link rear suspension that allows for independent adjustments for chassis roll, bump and alignment.设计者在51区兴建12r5就一2.5毫米编织碳纤维底盘采用了枢轴球连结后悬架，允许独立的调整底盘辊，撞及路线。 Having the ability to make these chassis adjustments independently gives the 12R5 greater potential to get the best possible handling from the car and the track surface.有能力，使这些底盘的调整，独立赋予12r5更大的潜力，以得到最佳的处理可能从汽车和赛道的表面。
Click here to find out more details…请按这里以了解更多的信息…
The 12R5 feature new shocks that have a through-shaft design making for equalized damping throughout the full stroke of the shock in both directions, without any unwanted rebound.该12r5功能的新的冲击有通过轴的设计决策，为均衡阻尼整个充分中风的冲击，在两个方向，没有任何不必要的反弹。 The center shock tower has four mounting positions that split the spring rates for even finer adjustments.该中心大楼已休克的四个安装的立场分裂的春天利率，甚至更精细的调整。 The new center shock also controls the chassis droop and can be adjusted on the car with a turnbuckle wrench, making it easier and quicker to get dialed in.新的研究中心休克也控制机箱下垂，并可以调整对汽车与turnbuckle扳手，方便，快捷的获得拨打英寸
The 12R5’s ‘Active Strut’ front end has been optimized, featuring symmetric components with adjustable caster and track width, as well as a new front axle with wheel nut.该12r5的积极支撑'的前端进行了优化，采用对称组件可调连铸机和轨道的宽度，以及作为一个新的前轴与车轮螺母。 Factory Team blue aluminum servo mounts position the servo flat on the chassis for a lower center of gravity and include Ackerman adjustment spacers.工厂队的蓝色铝伺服安装位置伺服单位对底盘较低的重心，包括阿克曼调整间隔。 The foam front bumper helps protect body and chassis during impacts.泡沫的前保险杠有助于保护机构和底盘期间的影响。
The 12R5 comes ready for brushless featuring an optimized wide rear pod, woven carbon fiber top plate and Factory Team blue aluminum machined motor mount and left-side bulkhead.该12r5来准备的无刷特色的一种优化广泛后方的POD ，编织碳纤维和顶部盖板厂队的蓝色铝合金加工电机山和左侧舱壁。 The woven carbon fiber top plate attaches to the motor mount and left-side bulkhead at four points, making the 12R5’s rear pod more rigid and durable.编织碳纤维顶端板的重视，汽车山和左侧舱壁在四点，使12r5的后方荚果更为僵化和持久的。
The demands and expectations of 1:12 scale race cars have never been higher.的要求和期望1时12规模的赛车从未更高。 The 12R5 Factory Team not only meets these demands and expectations but exceeds them with the best 1:12 scale race car made by Team Associated to date.该12r5厂队，不仅满足了这些要求和期望，但超过了他们最好的1时12规模赛车队所作出的相关日期。 The 12R5 Factory Team is truly another champion by design.该12r5厂队是真正的另一项冠军由设计。
Features of the 12R5 Factory Team Kit 特点的12r5工厂团队套件
- New Factory Team pivot ball-link chassis allows for independent adjustment for roll, bump, and alignment -新工厂的团队枢轴球链接底盘允许独立的调整轧辊，碰，及路线
- The pivot ball-link chassis has proven to be more durable in high speed impacts and better in bumpy track conditions -枢轴球连接底盘，已被证明能够更持久，在高速的影响，更好地在崎岖的赛道条件下具备
- 2.5mm woven carbon fiber chassis -二点五毫米编织碳纤维底盘
- Full ball bearing -全球轴承
- Ball differential -球差
- New Factory Team shocks features a through-shaft design making for equal damping with no rebound in both directions -新厂队冲击功能，通过轴的设计，使平等的阻尼没有反弹，在两个方向
- Woven carbon fiber center shock tower allows for incremental adjustments of rear spring rate -编织碳纤维中心休克塔允许增量调整，后方的春天率
- Foam front bumper helps protect body and chassis during impact -泡沫前保险杠有助于保护机构和底盘期间的影响
- Updated active strut front end features symmetric components with adjustable caster and track width, as well as a new front axle with wheel nut -更新的积极支撑前端的特点对称组件可调连铸机和轨道的宽度，以及作为一个新的前轴与车轮螺母
- Servo mounts flat for a lower CG and includes Ackerman adjustment spacers -伺服安装单位为较低的C G和包括阿克曼调整间隔
- Wide rear pod allows easy installation of brushless motors and features Factory Team blue aluminum machined motor mount and left bulkhead -广泛的后方荚果允许易于安装的无刷电机和特点的工厂队的蓝色铝合金加工电机山和左舱壁
- Factory Team T-plate chassis option is available -工厂团队T型钢板底盘选项可用
Source: 资料来源： Associated 相关 [rc10.com] [ rc10.com ]
Usage »使用»
If you republish any elements from this page on another website, including text, original pictures or formatted results please be sure to add a link back to this page as the source.如果您重新发布的任何内容，从本网页上另一个网站，包括文字，图片或原来的格式的结果，请务必添加一个链接回到此页为源。
Related Posts »相关文章»
Comments评论
Expect IFMAR World Championship!!预计ifmar世界锦标赛！