October 24, 2023
…bodies, the Magic Repair Glue is perfect but can also be used to glue together parts made of plastic, carbon fibre, and other materials. Unlike the usually very hard and brittle superglue, Magic Glue always remains somewhat flexible therefore making it especially good for patching and repairing your car bodies. The glue can be applied with the enclosed glue tip very cleanly and neatly dosed due to its great consistency. It is not too thin or not too tough like ShoeGoo. The included small UV lamp is then used to cure the glue which takes approximately 10-seconds. Source: Tonisport [tonisport.de]…
October 18, 2023
MR33 has released a new aluminium servo holder single arm steering for the Awesomatix A800R / A800MMX 1:10 Touring Car. The 8 gram LCG servo mounts have a very low profile as no material extends beyond the servo. This lowers your car’s centre of gravity and allows your servo housing to shine in its original design when you look at the vehicle from above. The servo floats 0.5mm above the chassis and does not affect its flexibility. Source: Tonisport [tonisport.de]…
August 30, 2023
…both plastic and aluminium options, the premium CNC machined, hard coated aluminium spool pulley fits the A800R, A800MMX, and A800FX (and Evo) models. The gear has perfect concentricity, is very light and extremely durable is recommend it for all stock classes and also for modified racing. The gear including the aluminium ring and screws weighs 6.5g, making it 2.5g heavier than the original plastic part from Awesomatix. The aluminium differential gear has perfect concentricity and extremely durable. The gear including aluminium ring and screws weighs 5.5g, which is 2.5g heavier than the original plastic part from Awesomatix. Source: Tonisport [tonisport.de]…
August 23, 2023
…2 went to Sebastian Steck (Capricorn). “That’s just great! German champion – I never even dreamt of this,” Thilo cheered after crossing the finish line to fell full of joy into the arms of his father Joerg Baldes, who has achieved considerable success in RC motorsport himself over the past 30 years and now passes on his experience to the next generation as a mechanic and coach. “Thanks Dad, and thanks to everyone who has given me such great support, especially REDS Racing for the powerful engines, Shepherd and ToniSport.” So far this season, the Shepherd driver has already won…
June 29, 2023
MR33, the brand of multiple World Champion and Awesomatix factory driver Marc Rheinard, has released their new Awesomatix Multi Tool V2. A practical tool for all A800R and A800MMX touring car owners you can easily screw and unscrew the differential as well as mount and dismount cardans. Also a tie rod wrench is integrated. The aluminium tool of MR33 consists of two parts and is black anodised. Source: Tonisport [tonisport.de] …
January 13, 2023
MR33, the brand of multiple World Champion Marc Rheinard, has released this Carbon Flex T-Brace for Awesomatix’s A800FX and Evo kits. Due to the pressed-in threaded sleeves, you can mount the brace very easily on the rear of the chassis. Depending on the orientation, the strut can be mounted completely on the chassis, or slightly raised above the chassis. The different mounting points give you several flex options and an additional adjustment possibility for your A800FX. Additional nuts are not needed for mounting. Source: Tonisport [tonisport.de]…
December 8, 2022
…of the technical inspection before the run. If only the engine sensor is applied and the throttle is opened, the (maximum) engine speed can be measured – perfect for testing speed limits of modern speed controllers. Technical data Compact and ergonomic housing with integrated stand Dimensions: approx. 115mm x 42mm x 26m Weight approx. 110g 1.3 inch (3,2cm) OLED display with 128*64 pixel resolution Very good readable even in sunlight magnetic USB cable to power the device Motor sensor with approx. 35cm long cable Included items Measuring device Motor sensor Magnetic USB cable 1m MR33 storage bag Source: Tonisport [tonisport.de]…
October 26, 2022
…same full-size footprint as your stock foam bumper! No need to worry about a thin bumper folding while at high speed in modified racing or not fully protecting your touring car in the event of a crash. Additionally, the bumpers have a taper on the bottom leading edge to prevent it from dragging on the ground under braking at high speeds. Every bumper is manufactured in house in the USA from high quality European polymers. Approximate weight of each bumper: Mugen 10g, Awesomatix 10g, Xpress 10g, Yokomo 9g, Xray 8g, Schumacher 7.5g, ARC 7g. Source: Alera3D [alera3d.com] / Tonisport [tonisport.de]…
