Friday, June 6, 2008

Kyosho Evolva M3 Alu Suspension Mounts 알루미늄 서스펜션 마운트 kyosho evolva m3

Categories - Kyosho, Accessories, On Road, Products - add a comment

알루미늄 서스펜션 마운트 kyosho evolva m3

Kyosho have released optional aluminium front suspension mounts for the Evolva M3 1/8 on-road racer, which strengthen the front suspension assembly and improve durability. 선택 사항을 발표 kyosho 알루미늄 프론트 서스펜션을 장착 evolva m3 1 / 8에 - 도로 경주자, 프런트 서스펜션 어셈블리 및 개선의 내구성을 강화합니다. The machined aluminium mounts are packaged with woven graphite 0.5mm and 1.0mm shims that are used to adjust front suspension geometry, plus all the hardware that’s needed to install the mounts. 흑연 the 기계 알루미늄 0.5mm와 1.0mm 탑재가 짠 패키지 shims 프런트 서스펜션을 조정하는 데 사용되는 기하학, 플러스를 설치하는 모든 하드웨어를 탑재가 필요합니다.

Click here to see the brackets mounted… 괄호를 참조하십시오 탑재하려면 여기를 클릭하십시오… (more…) (자세한…)

grp gandini

Thursday, June 5, 2008

Team Associated TC5 Performance parts 팀 tc5의 성능 관련 부품

Categories - Team Associated, Accessories, On Road, Products - add a comment

팀 tc5의 성능 관련 부품

Team Associated have released a number of new performance parts for their TC5 electric touring car. 팀 관련 부품을 릴리스했습니다 그들은 다수의 새로운 성능을 tc5 전기 관광 차량합니다. Starting with this new Slipper spool kit which has been developed to help minimize damage to the CVA bone blade under high load conditions, such as hard impacts and large bumps. 이 새 구두로 시작하는 키트를 스풀 손상을 최소화하기 위해 개발되었습니다 뼈 블레이드 cva 높은 하중 조건과 같은 하드에 미치는 영향 및 대형 충돌합니다. New for that spool kit are some new slipper pool pads, sold in a pair they are a direct replacement for the standard parts. 이 새로운 기능은 사람들에게 새로운 구두를 풀 스풀 키트 패드, 판매되고 그들은 직접적으로 대체하는 한쌍의 표준 부품합니다. Finally for the TC5, there is this bearing cam holder set that allows for more adjustment in the belt tension, specifically when a looser tension setting is required. 결국은 tc5, 캠 홀더 설정할 수있는이 방위에 대한 자세한 벨트 장력 조정, 특히 실패하면 긴장 설정이 필요합니다.

Click more to see the other products… 자세히를 눌러 다른 제품 참조하십시오… (more…) (자세한…)

Wednesday, June 4, 2008

Exotek TC5 Lowered layshaft set layshaft 세트 exotek 인하 tc5

Categories - Exotek, Team Associated, Accessories, On Road, Products - add a comment

베어링 tc5 모자 exotek 인하 layshaft

Exotek Racing have released these fibre reinforced nylon bearing caps for the Associated TC5 touring car to loosen the front and rear belts. 이러한 섬유 강화 나일론 exotek 레이싱을 발표 tc5 연결된 베어링 관광 차량의 뚜껑의 전면과 후면에 벨트를 느슨하게합니다. By lowering the layshaft 1.25mm, the tension on the belts is lessened, freeing up your drive train without the need to buy expensive after market belts. 인하하여 layshaft 1.25mm, 벨트는 긴장을 완화, 개방의 필요성을 구입하지 않고 당신의 드라이브를 기차 비싼 후 시장 벨트합니다. The added benefits are more diff pulley cam setting that you are able to use as well as lowered center of gravity. 캠 풀리 추가된 혜택은 더 많은 차등을 사용할 수있다면 설정을 낮추고 중심뿐만 아니라합니다.

Source: 출처 : Exotek exotek [exotekracing.com] [exotekracing.com]

내부자 losi

JACO Prism 1.5 & Rubberz on Prism 1.5 & rubberz에 jaco 프리즘 프리즘

Categories - Wheels, Jaco, Tires, On Road, Products - 1 comment so far

1.5 & rubberz에 jaco 프리즘 프리즘

JACO have announced that their Rubberz line of pre mounted rubber sedan tires now come glued on the company’s new Prism wheel. rubberz 라인은 그들의 포도주를 jaco다고 밝혔다 세단형 자동차 타이어를 장착 고무 접착제 자, 이제이 회사의 새로운 프리즘 바퀴를합니다. This new wheel has been designed to specifically suit rubber tires with just the right amount of flex for superior traction and durability. 이 새로운 휠 정장 고무 타이어를 구체적으로 설계되었습니다 적당한 양의 플렉스만으로도 뛰어난 트랙션과 내구성을합니다. Also new from JACO is the release of pre mounted Nitro Shoes to their new Prism 1.5 wheel. 또한 이전의 릴리스에서 새로 탑재 jaco은 그들의 새로운 프리즘을 니트로 1.5 바퀴 신발을합니다. Featuring a 1.5 degree taper, the wheel has a smaller inner edge diameter which matches the camber used on most nitro touring cars and so ensures an even depth of foam accross the surface. 1.5 학위을 선보이는 체중 감소, 바퀴는 지름이 작은 안쪽 모서리와 일치하는 의회에서 사용하면 대부분의 니트로 관광 자동차와 짝수의 깊이 그래서 전체의 표면에 거품합니다. JACO claim these new lightweight wheels offer a longer tire life, increased traction, improved forward bite and more consistent performance. 이러한 새로운 경량 주장 jaco 더 이상 제공하는 바퀴 타이어 생활, 상승 트랙션, 물기도하고 앞으로 더 많은 일관성있는 성능을 개선합니다.

Click more to see the Prism 1.5 explanation… 자세히를 눌러 프리즘 1.5 설명을 참조하십시오… (more…) (자세한…)

팀 c 레이싱

Tuesday, June 3, 2008

Xray T2′008 Composite diff delayed xray 복합 차등 지연 t2'008

Categories - Xray, Accessories, On Road, Products - add a comment

공지 사항 xray 차등 복합 t2'008

Xray have announced that due to unprecedented demands on their moulding department, the xray은 전례가없는다고 밝혔다로 인해 몰딩 부서의 요구 사항, originally planned 당초 composite differential for the Xray T2′008 will be delayed with no time schedule. 복합 차등을 t2'008 xray이없는 일정이 지연됩니다. Xray will continue to include the aluminium differential in the kit as well as offer it as a spare part. xray은 계속이 키트를 포함하는 알루미늄 플러그로뿐만 아니라 여분의 부품을 제공합니다.

Source: 출처 : Xray xray [teamxray.com]

액체 이끌고

Monday, June 2, 2008

Hot Bodies Cyclone TC parts 핫 시신 사이클론 tc 부품

Categories - Hot Bodies, Accessories, On Road, Products - add a comment

핫 시신 사이클론 tc 부품

Following the release of the 다음과 같은 이번 앨범의 Cyclone TC 사이클론 tc , which we showed you back in March, Hot Bodies have released the standard TC parts as option parts for the other Cyclone’s in the range. 하는 것입니다 당신을 다시 보여준 년 3 월, 핫 시신 tc 부품을 선택의 기준을 발표 다른 저기압의 범위에서 부품을합니다. The front and rear bulkheads, as well as the middle block and motor mount are now available and are all purple anodised with the main difference being aesthetic, no longer featuring a chamfered edge. 차단 벽의 전면과 후면뿐만 아니라 중간을 차단하고 모터 탑재는 현재 구할 수 있고, anodised과 보라색의 주요 차이점은 모두 미적되고, 더 이상을 선보이는 모따기 에지합니다. For performance improvements there are the new shock bodies for smoother shock action, while new front and rear graphite wishbones give an extra lower shock mount. 성능을 향상시킬 수있다는 새로운 충격을 부드럽게 몸에 충격 액션 wishbones 제공하는 동안 새로운 앞면과 뒷면 흑연 엑스트라 낮은 쇼크 마운트합니다. Finally, there is the Cyclone TC sway bar holder that includes everything you need to upgrade to this new system with the exception of the anti-roll bar. 마지막으로, 사이클론 tc 흔들 바있다 홀더가로 업그레이 드하는 데 필요한 모든 항목이 포함되어를 제외하고이 새로운 시스템에서 앤티 - 롤 바있습니다.

Click more to see the other products… 자세히를 눌러 다른 제품 참조하십시오… (more…) (자세한…)

Friday, May 30, 2008

Atomic RC High Grip Formula tires 원자의 공식 타이어를 이끌고 높은 그립

Categories - Atomic RC, Tires, On Road, Products - 1 comment so far

원자의 공식 타이어를 이끌고 높은 그립

Atomic RC have released these new High Grip Formula tires for use on Mini-Z chassis’. 원자의 수식을 이끌고을 발표 그립 타이어를 사용하기위한 이러한 새로운 높이에서 미니 - z 섀시 '합니다. Featuring a radial tread pattern, this helps gain more rear grip under acceleration, while swapping the tires to have the tread pattern the opposite direction will give the car a different feeling. 요골 바퀴 자국을 선보이는 패턴,이를 통해 더 많은 후방 그립 아래 이득 가속 타이어를 교환하는 동안 바퀴 자국이 반대 방향으로 서로 다른 느낌을주는 차를합니다. Available in 2 high grip models, silicone rubber and normal rubber, these tires have been extensively tested, and work best on carpet and RCP surfaces respectively. 사용할 수 그립이 2 높은 모델, 실리콘 고무와 정상적인 고무,이 타이어는 광범위한 테스트, 그리고 카펫 및 rcp 표면에서 각각 최고의 작동합니다.

Source: 출처 : Atomic RC 원자 이끌고 [rcatomic.com] [rcatomic.com]

Tuesday, May 27, 2008

Serpent Centax-3 WC Clutch system 독사 centax - 3 화장실 클러치 시스템

Categories - Serpent, Accessories, Engines, On Road, Products - comments closed

독사 centax - 3 화장실 클러치 시스템

Serpent have introduced a new WC version of their Centax III clutch system and updated 2-speed gearbox system. 독사는 새로운 화장실 버전의 도입 centax 3 클러치 시스템과 업데이트 2 - 스피드 기어 시스템합니다. The updated transmission uses the same pitch as before but has an improved tooth profile, which combined with a wider spur and pinion gear, gives better contact for better durability and power delivery. 업데이트 전송을 사용하지만이 개선은 이전과 동일한 피치 치아 프로필에 박차를 결합하여, 넓은 피니언 장비, 내구성을 향상을 위해에게 더 나은 문의 및 전원 배달합니다. The steel clutch bell housing has also been updated with the pinions no longer forming the structure of this area but are instead attached the steel threads on the new bell. 철강 클러치 종 주거는 또한 pinions 더 이상으로 업데이 트되었습니다이 영역의 구조를 형성 철강 스레드를 첨부 있지만 새 벨 대신합니다. This ensures that the gears spin true and are much more resistant to any flexing in this area. 이렇게하면 기어가 훨씬 더 저항하는 스핀 진실하고이 지역에서 어떤 굴곡합니다. As a result of this new bell, the front 2 bearings in the clutch have been changed and are now smaller in diameter compared to previous versions. 이 새로운 종의 결과로, 정면에서 클러치 베어링이 변경되어 현재는 이전 버전에 비해 작은 직경합니다. The new WC transmission cannot be used together with the original spurs or pinion gears. 새로운 화장실 전송의 원래 박차를 사용할 수없습니다 또는 피니언 기어와 함께합니다. A full range of spur gears (54T-56T, 59T-61T) and pinions (16T-18T, 21T-23T) are available separately. 전체 범위의 박차 기어 (54t - 56t, 59t - 61t)와 pinions (16t - 18t, 21t - 23t)가를 개별적으로 사용할 수도있습니다.

Click here to see more pictures… 더 많은 사진을 보시려면 여기를 클릭하십시오… (more…) (자세한…)

Page 1 of 50 1 페이지 1의 50 2 3 4 5 » ... ... Last » 마지막»