Red RC » Tires

October 30, 2010

JConcepts pre-mounted Short Course tires

[youtube]http://www.youtube.com/watch?v=oJCVBsxSLHY[/youtube]

JConcepts has hit the easy button once again with an entire line of pre-mounted Short Course Tires. JConcepts set a new standard in Short Course tire design and performance with the original Goose Bumps, and now, they are even easier to use than ever before with the introduction of pre-mounts. The line-up includes the versatile Subcultures and ROAR National Champion Goose Bumps, Double Dees and Bar Codes all in sticky green compound. Stay on-track in SCT and hit the easy button with JConcepts.

View the full line up of SC pre mounts here

October 28, 2010

RC4wd Interco Super Swamper TSL/Bogger

RC4wd have announced the all new Officially Licensed Interco Super Swamper TSL/Bogger. This new Interco tire is the tallest in its class, topping out at an amazing 4.7″, living up to its true scale counterpart. This tire is a new 1.9″ wheel size, and they will fit many of the 1.9″ wheels on the market. Available in advanced X3 soft & sticky compound.

Source: RC4wd [rc4wd.com]

October 28, 2010

DnM Tech ultra carbide cutter

DnM Tech are releasing an ultra carbide cutter for foam tire truers. It can be use to fit most foam tire truer in the market such as the GQ, 3Racing and Hudy tire truers and the special cutting edge design offers ultra and smooth cutting performance, while at the same time the special cutting material is very durable.

Source: DNM Tech [dnm-tech.com]

October 22, 2010

Pro-Line Suburbs 1/8th scale tires

Having sent us a sneak peek of their new Suburbs 3 weeks ago, Pro-Line have now released these new 1/8th scale tires. Available in Pro-Line’s proprietary M3 (Soft) and MC (Clay) compounds, it makes sense that the popular indoor and blue groove tread pattern would be made available for the 1/8th class. Featuring an inner and outer radius rib tread for increased corner holding and predictable side-bite, the internal sidewall ribbing maintains sidewall structure in extreme traction conditions for greater corner control. The tread height is predictable, aggressive, and long-lasting for use on a variety of blue-groove track and surfaces where you would typically run soft compound tires and the tires are supplied with re-usable Closed Cell foam inserts.

Source: Pro-Line [prolineracing.com]

October 22, 2010

Pro-Line Renegade wheels, Street Fighter tires & 12mm adaptors

Pro-Line have released these Renegade 2.2″/3.0″ SC Wheels. The design department at Pro-Line thought it was time to change it up and bring to life another bold looking SC wheel. The Renegade wheel for SC trucks features a tough 10 spoke design replicating the latest in high performance full size forged racing wheels used by the pros. Detailed beadloc and lug nut hardware only adds to the realism. Looking for the ultimate long wear street tire? Then check out Pro-Line Street Fighter SC. Based on the latest in high performance on-road tire technology, the Street Fighter SC has the perfect balance G force developing tread pattern and style that will keep your truck turning heads. Finally, Are you tired of stripping the drive pin slot in your rear SC10 wheels? Pro-Line has you covered with the release of the 12mm Wheel Adapters for SC10. You now have the option of running Pro-Line popular ProTrac offset wheels with these durable 12mm hex drives.

View the other products here

October 21, 2010

Sweep Racing V2 Battle star

Taking all the feedback from their drivers about their Battle Star tires, Sweep Racing have come out with a solution for extremely rough surfaces. In some extreme conditions the tire lost some spikes or they bent over the treads causing reduced acceleration after 20 or more minutes of racing. To solve potential problems, they have revised the design, connecting the two spikes together and are pleased to introduce the V2 Battle Star. The tires offer enhanced durability, acceleration and stopping power and less squat giving a smaller skid angle for faster cornering. Expect it to make its debut at the 2010 IFMAR Worlds in Thailand in 2 and a half weeks.

Source: Sweep Racing [sweepracing.com]

October 20, 2010

IDM Factory tuned engines & new tire range

Daniele Ielasi was in contact with us to tell us about his new IDM product releases including an update to his line of .21 and .12 engines. The new individually numbered special edition versions of the Evo4 motor are Factory tuned and feature extra internal tuning for extra performance. IDM have also released their new tire & wheels with the rims featuring carbon fibre inside the material for increased hardness so that the wheel always stays constant even in extremely hot conditions. Available for 1/8th and 1/10th scale cars, they come in the usual range of shores.

View the tire range here

October 20, 2010

HoBao 1/8th offroad tire inserts

HoBao have released 3 new molded foam inserts for off-road racers. Available in 3 different compounds the black (firm) insert is ideal for maximising control as the extra firmness allows the tyre to maintain its shape. This in turn means the tyre has increased traction and maneuverability. The grey (medium) compound is better suited for tracks which include jumps. There is more ‘give’ in the insert allowing it to soak up more of the impact when landing. For the best of both worlds you can always go for the more professional dual compound. While more expensive than the other single colour inserts, the dual insert has hardened shoulders with a softer strip in the middle. This means you get the added traction of the black insert with the improved dampening of the grey insert.

Source: CML [cmldistribution.co.uk]