Red RC » 2010

March 15, 2010

Racers Edge SureCharge 1500

The SureCharge 1500 from Racers Edge uses the most advanced Lithium charging and balancing technology to get the most out of your LiPo & Life-Po battery packs. The adjustable charging rate, from 1amp to 5amps, will easily take care of everything from 1/10th, 1/12th and 1/18th scale packs down to receiver and transmitter packs. With the integrated JST-XH balance ports the most common 2 and 3 cell Lithium packs are easily maintained properly for the longest possible cycle life. The included true branded Traxxas HC and Deans charging leads means that you will not need to build any custom adapters to get up and going.

Click here for the full features list

March 15, 2010

Xray Column – DHI, ETS, Nürnberg Show

The 40th installment in the Xray column from Xray owner and chief designer Juraj Hudy is now online. In this months column he talks about this year’s DHI Cup, ETS in Czech Republic and the Nürnberg Toy Fair.

Production in January was completely booked with the production of T3 kits and as such I didn’t have to hurry but I still needed to push myself to finish a few final details on the new X10 car to get it ready. The new Link version of the 1/10 GT pan car has for the last few weeks been in the last final design stage after the release of the XII Link a few weeks ago, and needed only the final confirmation.

Read the full column here.

Source: Xray [teamxray.com]

March 15, 2010

Abisset wins opening French 1/8th National

The opening round of the French 1/8th scale on road nationals took place last weekend in Beaumont Monteux in the south east of the country. Qualifying in the Elite class went the way of Shepherd driver Richard Volta, who after 7 minutes was 3 seconds in front of Serpent/RB driver Anthony Abisset, with team mate Stéphane Riccobono and Motonica driver Arnaud Mathieu completing the top 4. In the National class, Serpent racer Damien Thirion took the top qualifying spot in front of Mugen driver Eric Loge in 2nd, with Maxime Tenet and Jérémy Cassagne in 3rd and 4th. The elite final saw Volta lead away with Abisset in close pursuit, this order remained the same until Volta hit mechanical trouble and dropped out of contention allowing Anthony to take over at the front, who close to the end of the race had a close battle with team mate Riccobono, but a small mistake by Stéphane gave Anthony the breathing room to take the win, with Riccobono 2nd and Gérald Colinet in 3rd, giving Serpent and RB the complete podium. In the National class saw an early race battle between Loge and Thirion with the latter taking the lead and able to build up a gap before stopping just before the pits and allowing Loge back into the lead with Antoine Gaschet climbing up to 2nd, while Thirion recovered to take 3rd.

Click here to see the national podium

March 15, 2010

HPI Racing Blitz tire holder

HPI Racing have released this handy tire holder for your Blitz tire collection. Utilizing a tough aluminium rod, hex adapter and serrated wheel nut, the tire holder keeps you organized by holding four Blitz short course tires together. Now you won’t have to worry about loose tires rolling around in your pit box or hauler bag. Supplied in pairs.

Source: HPI [hpiracing.com]

March 15, 2010

TQ Racing report from Chi Town Shootout

TQ Racing are reporting that their team driver Johnny LoGiudice was the Top Qualifier in both the 2wd Modified and Truck Modified classes at the recent Chi Town Shootout with his TQ Racing SX10 2w and SX10T. Johnny won the 2wd Modified class with fellow TQ Racing team driver JP Richards finishing in third. While Johnny was also the TQ in the Modified Truck class, some trouble in the mains knocked him down the order, but team mate JP Richards stepped up from a lower qualifying position to finish in 2nd place. Also in the 13.5 buggy class – TQ Racing team driver Ray Kindstom finished third in his first major event with the TQ SX10 2w. TQ Racing continues to develop the SX10 4w four wheel drive chassis which will soon be released and development work is continuing on the SX10 SC Short Course chassis for an early summer release.

Source: TQ Racing [tqracing.net]

March 15, 2010

CSO 966 CVD shafts

New from CSO Products are these optional CVDs for the 1/8th scale Serpent 966 & 960. Made from hard coated steel, these complete CVD shafts are super strong and a direct replacement for the standard versions.

Source: CSO [cso.com.hk]

March 15, 2010

Trofeo Motonica 2010 report

Last weekend saw the Trofeo Motonica take place at the Riccione track in Italy and attracted drivers across three categories 1/8th, 1/10th 200mm and 1/8th Classic. In the 1/8th scale 4wd class it was Maunel Tordi that took the win by over a lap from Paolo Maggioli in 2nd and Stefano Sammarini in 3rd, a lap further back. Pole man Sando Sammarini, easily the quickest man in the race, had to retire after only 6 minutes. In the 1/10th scale class Alex Rinati took the victory, 3 laps clear of Manuel Antinori in 2nd, with pole man Alessandro Bracci a lap back in 3rd spot. In the Classic class, Paolo Gaggiola was able to convert with pole position to a 5 lap victory in front of Simone Giordano and Kevin Pignotti in 2nd and 3rd respectively.

Click here to see the other podiums

March 15, 2010

CRC Shock springs & Sanding paddle

New from CRC for use with their Encore Shocks, Durashocks and other brands of shocks is this new line of springs. Sold in a complete set of 6 or individually, you can get them in blue, white, red, green, purple and black. Also from CRC is their tire sanding paddle that has a coarse 60 grit on one end to round the edges on even the toughest rubber, such as purple front tires. Then flip it around and get the perfect finish with the 120 grit end.

Click here to see the sanding paddle