Red RC » 2014 » August

August 6, 2014

Batlle tops first seeding practice

Robert Batlle set the pace in the opening round of seeding practice at the 1:8 Offroad European Championships in Germany, the Mugen driver fastest over 5-minutes from the Kyosho of defending Champion David Ronnefalk. Winning his second European title the last time the championships visited the Sand am Main track, the Spaniard would outpace his Swedish rival by 2.644 seconds with Team Xray’s Martin Bayer completing the Top 3 a further 1.704 off.

Continue reading this report here or view our complete event coverage here.

August 6, 2014

Mibosport Summer On-Road Cup 2014 – Report

The final race of the Mibosport Summer On-Road Cup 2014 took place at the permanent on-road track in Blansko with over 40 drivers from the Czech Republic, Slovakia and Poland in attendance. The TQ holder in the Touring Car Modified class was open till the very last qualifying session. After three sessions, David Nemcek held the prestigious TQ spot as his main rival, Radek Flek had very bad luck due to technical problems followed by a mistake of a marshal, who put another car right into Radek’s racing line, which cost him a broken suspension and a retirement from the qualifying round. Despite all those problems, Radek did not give up and he grabbed the TQ in the last qualifying session with the fastest time of 24 laps in 5:02.438.

Click here to continue reading the report

August 6, 2014

Avid acrylic touring car chassis tweak plate

Avid now have this acrylic tweak plate for touring cars available. The car will be placed on top of it, the top deck screws will be loosened and tighten back up while pressing down on the car at the top and bottom of the battery and at the servo and speedo. This will help settle the chassis and get a true setting on the top deck. This acrylic tweak plate is an alternative to other units on the market and helps to save weight while travelling or keeping weight in that wallet.

Source: Avid [avidrc.com]

August 6, 2014

Official IIC touring car spec tire announced

The International Indoor Championships announce that the official spec tire for the 10th Anniversary of the IIC will be the Gravity RC Type C. The tire comes pre-mounted on the marked Gravity RC rim, made from a blend of plastic and polycarbonate, and known to be durable and true. The part number for the tires are GRC130 G-Spec Type C and they are available from your local hobby shop or directly from the Gravity RC website.

August 6, 2014

RB micro fibre pit towel

RB have a new pit towel available made from soft micro fibre. Measuring 50x100cm and coming in grey or orange colour the pit towel is very compact when folded and not only protects your work space’s surface but it also comes in handy when cleaning parts.

Source: RB [rbproducts.com]

August 6, 2014

Serpent Viper 977 carbon fibre chassis set

Made for the World Championship winning Viper 977 car is this carbon fibre and aluminium chassis set from Serpent. Developed over the period of several month and finally available for release, the set offers a carbon fibre main chassis with aluminium inserts that control both the flex of the chassis as well as act as an engine heat sink. The chassis offers improved flex compared to the stock aluminium part for increased steering and improved overall traction, which can be beneficial in a range of track conditions. While the rear alloy insert is a mandatory part, the front insert is an option to control the overall twist of the chassis. Flanged aluminium inserts keep the parts in place without harming the carbon fibre. Equipped with both inserts the chassis is around 60g lighter than its alloy counterpart and Serpent’s readily available brass inserts allow to up the weight if needed.

Click here to view more photos

August 6, 2014

Tamiya re-release Super Champ buggy

The latest re-release kit from Tamiya is the 1982 Super Champ 2WD buggy. Another icon of Tamiya’s early “scale-ish” buggies, the now Fighting Buggy 2014 called vehicle is based on a 2.5mm fibre glass double deck chassis, it features an independent trailing arm front suspension, a mono shock rear suspension and a plastic ABS bodyshell with aluminium roof. Subtle improvements to the suspension and drivetrain parts make for better durability, allowing to use more modern power systems to propel the buggy. The kit is set for a release in October.

Source: Tamyia [tamiya.com]

August 6, 2014

Arrowmax B-Max4 III aluminium steering plate

Made to replace the standard composite steering plate on the Yokomo B-Max4 III is this blue anodised aluminium link from Arrowmax. Milled from strong yet lightweight 7075-T6 aluminium the part offers improved durability and a more direct steering feeling.

Source: Arrowmax [arrowmax-rc.com]