November 7, 2018

AKA P1 1/8th buggy tyre

AKA have released a first image of their new tyre for 1/8th buggies, the P1. AKA’s latest addition to the lineup slots in between the GridIron and the Impact. The target for the tyre was to achieve longer wear than the GridIron II while keeping a small pin to perform well in the dust. To achieve this the P1 has a more dense tread pattern than the Grid II by using a similar pin size and grouping them closer together. The result is a tyre that has more forward bite and life span than the GridIron II. Sidebite is good and allows the car to rotate well in the turns. The P1 also has a smoother off centre feel than the GridIron. The profile of the carcass is the same as the World Champion Double Down which will keep the car flatter in the turns and keep the transitions left to right smooth. The tyre will hit stores in February 2019.

Source: AKA [raceaka.com]

November 7, 2018

Teponoja & Martikainen win at Finnish TC opener

The opening round of the Finnish Electric Touring Car Nationals was held in Lahti last weekend. The event was held on ETS carpet and as part of a hobby fair, attracting both many drivers and spectators. The competitive Touring Modified class saw Miko Teponoja taking the overall TQ in the tie-breaker with Joel Valander coming in 2nd on the grid. The opening A-main saw the TQ holder taking the win from Georgy Chmigal while in A2 it was Joel Valander who took the win from Miko in 2nd. The decisive third A-main again saw Miko holding the upper hand from Joel, and so it was Miko with the overall win from Joel 2nd as Georgy rounded out the top 3 in front of Vesa Yli and Henry Salmen.

Continue reading here

November 7, 2018

Ride DF 190mm touring car wing set

Coming from Ride is their new DF wing set for 190mm touring car body shells. Inspired by nature design the wings sport specially-shaped wave sections – as seen on dragonfly wings – to create downforce even at low air speeds. The set includes a type A wing for medium to high speed tracks and Modified classes, sporting a full-face wave section, while the type B wing was designed for low to medium speeds and Stock racing classes – the latter wing only utilises wave sections on the outer portions. Included in the set are four printed carbon fibre side plates and the wings are usable for most 190mm touring car body shells.

Source: Ride [rc-ride.co.jp]

November 7, 2018

Ongaro comes good to take Q4 in Perth

Davide Ongaro came good on his Top Seeding at the 1:8 Offroad World Championships to TQ the fourth round of qualifying in Perth.  The Italian led a Team Associated 1-2 in the evening run with Ryan Cavalieri enjoying a much improved performance as the American manufacturer’s drivers on the whole showed strong.  Having failed to run inside the Top 10 in the opening three qualifiers, Spencer Rivkin would take his RC8 to the fourth fastest time.  For defending champion David Ronnefalk, who broke in the previous round, his day was not to get any better as he suffered a plug failure during Q4.  Another of the title contenders to hit problems was reigning 1:10 electric Offroad World Champion Ryan Maifield who suffered a flame out after he was released from his fuel stop during the 1o-minute heat. Naoto Matsukura would set the third fastest time for the round with his second Top 3 of the event.  Behind him and Rivkin, Jared Tebo would have his best result so far with P5 ahead of Ty Tessmann, who having topped his heat was later demoted to 6th.

Continue reading this report here or view our complete event coverage here.

November 7, 2018

XRS PLMS On-road Series Rd2 – Report

The second race of the XRS PLMS On-road Series was held in the Polish town of Scinawka Srednia. The event not only attracted local drivers but also guests from the Czech Republic to compete in the three classes of Touring Modified, Touring 13.5T Stock and Formula. The Stock and Formula classes use XRS Hobbywing motors and all classes roll on pre-glued Hudy rubber. In Touring Modified it was Jakub Rozycki who took the win ahead of Jaroslaw Siwek and Martin Korinek in 2nd and 3rd respectively, making it an all-Xray podium.

Continue reading the report here

November 7, 2018

HB Racing D418 aluminium rear hubs

HB Racing have introduced an optional aluminium rear hub set for D418 buggies. The new rear hubs feature a revised geometry that includes new camber link attachment points and vertical ball studs for fine camber link adjustments and precise roll center tuning. The set includes a pair of rear hubs that are precision machined from high-quality aluminium with a hard-anodised black finish for wear and looks.

Source: HB Racing [hbracing.com]

November 7, 2018

Another TQ run for Tessmann as Ronnefalk breaks

It was another TQ run for Ty Tessmann at the 1:8 Offroad World Championships in Australia as the Canadian opened Day 2 of qualifying with a considerably slower time for the 10-minute compared to yesterday.  Topping Q2 with a time of 10:08.083 compared to today’s pace of 10:12.716, Tessmann led an Xray 1-2 with Bruno Coelho topping his heat for his best points so far. Having taken the opening round of qualifying, it wasn’t to be a good start to Wednesday’s action for reigning champion David Ronnefalk.  On his third lap, the HB Racing driver ‘donkey flipped’ his buggy on the right side of the track leading to a broken suspension arm.  A strong run from Spanish Mugen driver Juan Carlos Canas would see him complete the Top 3 ahead of team-mates Ryan Maifield and Robert Batlle.  Former Worlds Top Qualifier Elliot Boots, who so far hasn’t featured strongly, would be the top Kyosho for the third round with his first Top 6 run.

Continue reading this report here or view our complete event coverage here.

Tonisport
Mibosport
LC Racing
VP Racing
SRT
Monaco RC
T-Works