Red RC » Eoghain O Briain

February 16, 2009

Honigl & Trauner win Vienna Winter Champs

The Vienna Off road Winter Champs were run last weekend by RC Carpet Fun at the Arena Nova in Vienna and the event attracted 117 racers over 4 classes, 2wd, 4wd, truck and 1/18th buggy. In the 4wd class it was multiple European Champion and Tamiya team driver Hupo Honigl that took the top qualifier spot with his new 511X. In the race, the Austrian had an easy leg 1 win, but finished 2nd in leg 2 to setup a last leg battle between himself and Peter Pinisch, but Honigl was able to come through to win the final leg and overall title, with Pinisch taking the runner up spot, while German racer Bernhard Bachmann took 3rd overall. In 2wd it was a clean sheet for Rene Trauner who took the TQ spot and then won the first two A-mains to secure the overall with one leg left to run. Hupo took the win in the 3rd leg, but 2 bad runs in leg 1 and 2 meant he was out of contention and so Roli Hauleitner took 2nd and Peter Pinisch 3rd. The truck class was won by Roli Hauleitner, with Kreil Martin 2nd and Peter Wirthner 3rd, while in the 1/18th class Hupo Honigl won from Oli Holczer in 2nd and Andreas Knott 3rd.

content

February 16, 2009

Morganti & Apolaro take Winternats victory

Last week saw the 2009 Winternats run at the Ft Myers track in Florida, always the opening international gas race of the season. Qualifying saw Serpent racer Paolo Morganti TQ the 1/10th scale class while in 1/8th scale it was Mugen team driver Mike Swauger that had some serious pace in 1/8th scale to line up first. In Saturday’s finals it was Paolo Morganti that took the win in the 1/8th scale class with the new Serpent 966, finishing ahead of another Serpent driver Flavio Elias in 2nd , while Ralph Burch racing a Mugen took 3rd. In the 1/10th scale 200mm class it was again a Serpent win, this time for new ATS signing DJ Apolaro, who had a clear advantage of 3 laps over Xray driver Scott Rister in 2nd, with Chris Lefebvre a distant 3rd.

Click here to see the 1/10th scale podium

February 16, 2009

Much More Soldering station

Much More have released this Soldering Station, which acts as your third hand to help with difficult soldering jobs when using Euro style connectors and ultra plugs. Featuring 8 holes on the head of the station for holding both the male and female euro connectors, it also has a clamp that can hold down an ultra plug in both its upright and laydown position and which can also hold your ESC, leaving you free to concentrate on the soldering.

View more pictures

February 15, 2009

RT Symbio Mugen MBX-6 body

Reckward Tuning have released their Symbio body shell for the Mugen MBX-6. As with other shells in this line, this body shell will allow you to use all conventional performance air filters available today on the market and is supplied with Symbio decals and window masks. The shell is made from 1mm thick high quality polycarbonate and comes transparent pre cut with the base, tank cap, engine position and antenna all milled out.

Click here to see another photo

February 12, 2009

American HardCORR – Traxxas Slash

What started as what appeared to be “just another” racing class turns into a new hot trend as it seems: the four letters “CORR” (Championship Off Road Racing) take the RC-Car racing scene by storm and once again it was Traxxas that started it all. This time with the help of the Slash called 2WD racing truck. How will it perform in the European winter?

Read the full review here

February 12, 2009

Kyosho Setup & Clutch tools

Kyosho have released a number of new items to help you either setup your gas car or make working on it easier. Firstly is this ride height and droop gauge set, for both 1/10th scale as well as 1/8th scale cars like the Evolva series. Placing the stepped base under the stepped part at the rear of the Evolva M3 chassis plate, means you can measure the droop precisely regardless of wear of the bottom surface of the chassis. Also new is an adjustment tool for the clutch spring, which performs the job of tightening or loosening the nut simply and precisely. Other tools include a exhaust spring hook & front anti roll bar blade adjuster, a flywheel wrench that makes the installation or removal of your flywheel from any engine a breeze and a new Knife Edge stepped tip reamer, marked at 7mm, 9mm, 11mm, 13mm and 15mm for easy reference. Finally, for keeping your glow plugs at hand for a quick change during a race, Kyosho have release 2 new aluminium glow plug holders, a red version for standard plugs and a purple version for turbo plugs, both holding up to 8 plugs in each.

Click here to see the other products

February 12, 2009

Jovanovic clean sweep at NZ Gas Nats

The 2009 New Zealand On road Gas Nationals took place last weekend at the Ruapuna Raceway hosted by the Canterbury Radio Control Car Club and in attendance were several Australians including Peter and Steven Jovanovic. In the 1/10th scale class it was Steven and Peter Jovanovic that took 1st and 2nd respectively both running Kyosho chassis’, while in 3rd place was Mark Harling with the Xray NT1. In 1/8th scale there was another dominant performance by the Jovanovics, this time with Peter taking the win from Steven, both driving Motonica, with Selywn Duthie taking 3rd place driving a Mugen.

content

February 11, 2009

Capricorn RC Pit Box, Regulater & Setup system

Capricorn RC in Italy have been crazy busy lately adding to their product range, even branching out into conversions and complete kits. Today they have released a number of new items including this great looking aluminium pit box. Sporting a carbon decal, the box is similar to others on the market with space for all the tools and parts you need to take into the pit-lane with you for that important race. Also new is their exhaust gas regulator and cooler, which like other systems can help you regulate the pressure between the muffler and the tank while at the same time cooling the exhaust gases to help improve fuel consumption. New for setting up your car is this red anodized setup system for touring cars and separately 1/8th scale on road. Supplied in a handy metal case, the system is ball raced for optimal precision. Finally, also for set up is their new aluminium gauge set, which includes 2 chassis droop gauge blocks, chassis droop gauge -5 to 10mm and a chassis ride height gauge with a range from 3-10mm.

Continue to see the product pictures