Red RC » Eoghain O Briain

November 18, 2021

ZooRacing Drakster 1/12th LMP body shell

ZooRacing has finally entered the highly competitive 1/12th racing class with the Drakster body shell. This LMP body shell received a groundbreaking new design to reach a new level of high performance. Ultra downforce and efficient airflow allow ultra-sharp cornering and direction changes. At the same time the rear is planted on the track. This creates an easy to drive and super fluent handling on all types of tracks. To create this fast body, ZooRacing re-developed all areas from the front to the rear. Starting with a true front splitter, narrow and aerodynamic efficient front wheelhouses and its optimised sleek air outtakes, followed by the advanced cab forward design and the efficient rear spoiler. The body is very low, according to the latest generation of 1:12 pan car designs. The whole surface of the Drakster is smooth and without any sharp corners, that could create unwanted turbulences keeping the body very efficient and stable in any racing situation.

View more details & images here

November 18, 2021

OfficinaRC Bella Vita X4 titanium ball stud kit

OfficinaRC have presented their Bella Vita kit dedicated to the new Xray X4. This 32 piece ball stud kit is made of titanium and will guarantee exceptional durability (practically indestructible), increased performance and gives your car a unique and stylish touch. The kit includes 8 x lower pivot ball 6.0mm, 4 x ball stud 6.0mm, 8 x upper arm ball 4.9mm, 3 x ball stud 4.9mm x 4mm, 8 x ball stud 4.9mm x 8mm, 1 x ball stud 4.9mm x 10mm, 2 x ball stud 4.2mm x 4mm.

Source: OfficinaRC [officinarc.com]

November 17, 2021

T-Works LC12B1 aluminium centre driveshafts

For the LC Racing LC12B1, T-Works have produced this pair of aluminium centre driveshafts. Made from high-quality material, the shaft features a hard coating for wear resistance, with the length laser etched for quick reference. The rear centre shaft is 60mm long with the front centre shaft coming in a 50mm.

Source: T-Works [rc-tworks.com]

November 17, 2021

Yokomo YZ-2DTM 3.1 2wd EP buggy

The YZ-2DTM, Yokomo’s 2WD off-road buggy specifically for use on dirt, has been upgraded to the 3.1 version and is now available as a more complete package. Even though it is an upgrade, it is no longer an exaggeration to say that it is a new machine with newly designed parts throughout the chassis. With the goal of improving stability to cope with the increased speed due to the continuously improving power sources, the chassis has been lengthened, the wheelbase has been changed with the steering hub carrier and the rigidity balance of the front and rear parts has been reviewed to achieve a total balance that leads to improved laptimes. The suspension has also been upgraded to the latest configuration with 3mm shock shafts for a more responsive suspension and is now fully prepared for the 2022 season.

View more images & details here

November 16, 2021

SMART engine lapping system

SMART Workshop have released the latest product, the SMART engine lapping system in both a basic and premium version. This system offers a switchable module between the oil bath break-in method and running oil break-in method, you can select a specific module for your preference. The system is integrated with a touch panel for an easier and user-friendly operating experience. All of the parameters can be adjusted with the touch panel flawlessly and saved for your next break-in. It is not only customisable for a personal break in preference, but it also includes the parameter safety warning to ensure your parameter setting is in a ‘safe range’. For the hardware, the system had built-in sensors to detect the system is working in good conditions as always and it will be warning the user once the system detected any unusual issues.

View more details & images here

November 16, 2021

JConcepts Hazard 1.9″ aluminium wheel

JConcepts has transformed the popular Hazard wheel into an aluminium and multi-material combination design that has a vibe like no other. In addition, included in the package are brass weights which cleverly assemble to the centre beadlocker of the wheel to add lower weight. The three-piece design consists of the aluminium machined inner and outer sections along with injection moulded centre beadlocker. The uniqueness of this combination allows quadrant mounted brass weights which drop in place and secure with steel hardware. The outside of the wheel provides all the detail with blasted finish, machined lip, built-in 12mm hex and threaded boss areas for assembly. The inner aluminium part balances the look and provides beefy locations for assembly with M2 x 6 screws to give the proper squeeze of components. A highly detailed, black anodised aluminium centre cap is also featured in the wheel set which installs after the wheel assembly is secured to the vehicle. Centre caps install over traditional 4mm wheel nuts and are secured with small and included M1.6 x 5 screws. Each Hazard wheel fully equipped with all 4 brass weights tip the scales at ~113g minus hardware.

Source: JConcepts [jconcepts.net]

November 16, 2021

Ruddog metric tools & body reamer

The ever-growing Ruddog Products range now includes a selection of essential tools required for building and maintaining a 1/10th scale kit with hex hardware. The ergonomic red anodised aluminium handles are marked for easy identification. In addition to hex and socket drivers of various sizes, the range also includes a body reamer with threaded protection cap and replacement tips for the hex screwdrivers. The economic priced tools are available individually and in several sets.

Source: Ruddog [ruddog.eu]

November 16, 2021

Michael Derderian joins Capricorn team

Capricorn have announced the signing of multiple French National Champion Michael Derderian to their team for next season. The former Xray driver is a 1/10th Nitro specialist and had the following to see about his move to the Italian brand, ‘I want to thank Capricorn Team and Mr Patrizio Rossi for this great opportunity they have offered me, and I can’t wait to start this wonderful experience and I can’t wait to hit the track with my new Lab C04’.

Source: Capricorn [capricornrc.com]