Red RC » Sebastian

June 28, 2017

Ty Tessmann takes 2017 ROAR Nitro Truck title

The 2017 ROAR Fuel Offroad Nationals were held at Stateline RC Raceway last weekend. Rainy weather made things unpleasant at times but the track owners went above and beyond to make sure everyone had everything they needed and more, and got the track ready to run again after the rain came. In the Nitro Truck A-main runner-up after the qualifiers, Ty Tessmann (Xray) tried to keep up with leader Ryan Maifield (Mugen) right from the beginning and he waited for an opportunity to pass. Both battled back and forth during the beginning of the race but eventually Maifield made a bigger mistake which allowed Tessmann to get out in front and form a gap between them. Ty didn’t push too hard but just tried to maintain the gap and finish the race in 1st place which he was able to do, giving him his 4th national Truggy title. Behind Tessmann, Ryan Maifield and Tekno RC’s Ryan Lutz would round out the podium result.

Source: Xray [teamxray.com] | Image: JConcepts [jconcepts.net]

June 28, 2017

Yokomo roll out new YZ2 option parts

Coming from Yokomo and made for the YZ2 2WD buggy are new option parts in the form of a 1.0mm gearbox spacer set as well as a rear shock tower and 3-gear motor plate for raised gearbox setups. Starting with the gearbox spacer set, the set includes a gearbox spacer, a rear suspension mount spacer as well as front brace spacers all of which will raise the gearbox and all attached parts by 1.0mm. Raising the transmission will result in increased chassis roll which can be beneficial especially when running lightweight LCG battery packs or when less angled rear driveshafts are needed.

Continue reading here

June 28, 2017

Zen Racing NOS front end aluminium inserts ±1mm

Zen Racing have introduced their new aluminium inserts for the NOS 1/12th scale front end. Coming machined from dark anodised aluminium the inserts allow to lengthen or shorten the car’s wheelbase by 1mm in order to fine-tune the handling characteristics. Included in the set are four flippable inserts.

Source: Zen Racing [zen-racing.co.uk]

June 28, 2017

BMT introduce new 016GT option parts

Italian company BMT has introduced new option parts for the 016GT 1/8th on-road car. First up is a new aluminium main chassis plate that is made using a different grade material. The updated chassis will produce more overall traction while improving handling at the same time. Also new are front lower arm mounts in +2mm specification. The parts raise the suspension attachment point by 2mm which results in a lowered roll centre which is meant to improve steering especially on lower grip tracks. Also new and made for the front of the 016GT is a front bulkhead brace for improved steering emphasis while new 2mm front bulkhead spacers allow to change the front dynamic camber. Last but not least comes a new 17T 1st gear pinion.

View the other new parts here

June 28, 2017

Exotek 22 4.0 Ti front axles & YZ2 alloy top shaft

Coming from Exotek are the new Flite front axles for the TLR 22 4.0 and an aluminium top shaft for the Yokomo YZ2. Starting with the front axles, the Flite titanium front axle shafts include a 12mm front hex and at 3.5g per set they greatly reduce unsprung weight over the stock axles. Machined from high-quality titanium they are almost as strong as steel but much less prone to bent as the aluminium axles. The rounded and angled hex profile makes wheel installation extra quick and easy and the axles are a direct fit on the TLR 22 4.0.

Continue reading here

June 28, 2017

Sweep Racing 190mm touring car wing

Sweep Racing have introduced their new electric touring car rear wing. Sporting a width of 190mm the IFMAR-legal wing, that fits most of today’s 190mm touring car bodies, will greatly improve downforce and thus rear end grip in low traction conditions and it is available in standard 0.8mm or heavy-duty 1.0mm polycarbonate material and in either clear or black colour variants.

View the clear wing here

June 28, 2017

Hudy brushless 40mm & 30mm fan units

Coming from Hudy are their new brushless 40mm and 30mm fan units. Ball raced and thus highly reliable the fans offer easy to reach solder tabs that allow for quick and convenient wire replacements and more tidy wire routing. The fans are usable as motor and speed controller coolers and they include all-black 170mm wires.

View the 30mm fan here

June 28, 2017

Tekin ROC412 HD Element Proof 550-class motor

Tekin have introduced their new ROC412 HD Element Proof 550-class electric brushless motor. Designed for crawler and trail rigs the 4-pole/12-slot motor makes use of a machined 6061-T6 billet aluminium heatsink can and it comes with an 18.5mm rotor and Neodymium sintered magnets for strong braking power and torque. The motor is highly resistant to water, mud and snow, allowing the use even in unreal track conditions and its sensored design ensures smooth and reliable power output. The features list is rounded out by ABEC5 bearings and a high-strength 5mm pinion shaft.

View the features here