Red RC » Sebastian

May 16, 2017

Exotek XB4 & D216 aluminium steering crank sets

Exotek have introduced two new aluminium steering bellcrank sets for the Xray XB4 and the HB Racing D216 buggies. Both are machined from high-quality 7075 aluminium and they are of a heavy duty yet lightweight design. Four extra bearings replace all bushings and crunch sleeves for the steering plate make for wobble-free, smooth and long lasting operation. The XB4-specific set fits the current and also the older spec kits while the D216 part is also a direct replacement, matching the stock geometry.

View more images here

May 16, 2017

Arrowmax 7.6V 6200mAh low profile LiHV battery pack

Coming from Arrowmax is the new 7.6V 6200mAh LiHV low-profile battery pack. Built from high-performance 55C/110C high-voltage Lithium-Polymer cells the battery offers an increased nominal voltage of 7.6V and it can be charged up to a charge end voltage of 8.7V or 4.35V per cell. Even when used with the standard, and often mandatory 8.4V or 4.2V per cell setting, it offers a flatter discharge curve, meaning more power towards the end of the run. The pack utilises 5mm tube-type connectors and it is available now.

Source: Arrowmax [arrowmax-rc.com]

May 16, 2017

SWorkz Fox 4×4 1/10th scale RTR buggy

SWorkz have introduced the Fox 4×4 1/10th scale ready-to-run buggy. It utilises a multi-piece chassis that is constructed from 2mm aluminium side plates and composite material chassis guards while the outer roll cage makes for improved protection of the electronics. The drivetrain features durable front and rear differentials and the suspension’s unique shock absorber positions lowers the overall centre of gravity. The buggy comes pre-assembled, with a pre-decorated body shell and it is propelled by a Hobbywing-made 3652-series brushless motor and a 50A brushless speed controller. The set is rounded out by a 2.4GHz radio system with USB charger.

View the features and more images here

May 16, 2017

Alessandro Stocco wins at 2017 BarCup

The 2017 BarCup was held this past weekend at the Barco-off track in Barco, Italy. Alessandro Stocco took the TQ and win in the F1 class with his Reds-powered TLR buggy from TLR/Reds Racing team mate, Alessandro Castoldi while Leonardo Valente (JQRacing/Reds Racing) completed the podium result in 3rd.

Source: Reds Racing [reds-racing.com]

May 16, 2017

VP-Pro GT03 1/8th GT body shell

Coming from VP-Pro is the new GT03 body shell for 1/8th scale GT cars. It is moulded from tough 1.2mm polycarbonate and its long hood and roof section are meant to provide exceptional downforce and stability which is further helped by the large rear wing. The 310mm wide body fits most GT cars with a wheelbase of around 333mm and it is available soon.

Source: VP-Pro [vp-racing.com]

May 16, 2017

SWorkz S35-GTE 1/8th electric GT kit – Coming soon

Following a first teaser image SWorkz have released another preview for their forthcoming S35-GTE 1/8th electric GT kit. Based off of the latest S35-3 buggy platform the car will make use of the same suspension components as the off-road kit although shocks and chassis will be on-road specifications. More information and all images will become available in time for the release that is scheduled for this May.

Source: MW RC Cars [mwrccars.at]

May 15, 2017

Futaba reveal more 7PX details

Futaba have revealed more details of the forthcoming 7PX 2.4GHz telemetry radio system. Featuring the super-fast T-FHSS SR Super Response protocol the radio is expected to be even faster than the current 4PX transmitter while sporting a 4.3″ LCD touch screen, the new R334SBS diversity receiver as well as additional channels that feature reversing, end point adjustments, sub-trim, assignable brake mixing and ABS. The radio is expected to hit stores this summer.

View the features list here

May 15, 2017

JConcepts 25mm offset Tribute hex wheel adapter

Made for JConcepts’ Tribute monster truck wheels are the new 25mm offset hex wheel adapters. One of the key features of the wheels involves having replaceable adaptors which can alter the vehicle width. For the high-power crowd, JConcepts now offer the 25mm offset adaptors as a machined aluminium option. With the aluminium adapters, racers can now power up and race worry free with the widest track width available by JConcepts. The precision machined hexes are designed for 12mm hex hubs, they are light-weight and feature black anodising with laser engraved offset markings. The hex adaptors bolt-up just as the production units, utilising the stock hardware in a beefy 6-lug pattern.

Source: JConcepts [jconcepts.net]