Red RC » Sebastian

April 12, 2017

Shepherd Velox F1 2.25mm carbon chassis & pod plate

Coming from Shepherd and made for the Velox F1 formula kit are a 2.25mm carbon fibre chassis and lower pod plate. Developed in cooperation with Shepherd factory driver Olivier Bultynck, the parts, machined from German-made high-quality carbon fibre, offer optimised flex characteristics for outdoor racing on asphalt. The chassis and pod plate have already proven their performance as Olivier took the TQ and runner-up spot at the recent Spanish ETS round held in Madrid. Both the main plate and lower pod plate are available now.

Source: Shepherd [team-shepherd.com]

April 12, 2017

Sanwa PGS-LH SSL programmable low-profile servo

Sanwa have released first information on their forthcoming PGS-LH SSL programmable telemetry low-profile servo. The high-voltage compatible device will pull up to 15.6kg-cm of torque at speeds of down to 0.09s and it utilises a brushless motor and all-aluminium case. It is understood that the servo will sport telemetry features to monitor parameters such as the inner temperature, current and voltage using telemetry compatible Sanwa transmitters. On top of this the servo supports SSR and SHR features. No word on a release date yet but we keep you posted.

Source: Sanwa [sanwa-denshi.co.jp]

April 12, 2017

Kyosho Turbo Scorpion metal servo saver & spring sets

Kyosho have introduced first option parts for the Turbo Scorpion re-release vintage buggy in the form of a metal servo saver and two spring sets. Starting with the servo saver, the part is made to replace the standard composite item for a more sturdy assembly that will greatly improve steering emphasis on high-grip surfaces. The single bellcrank servo saver comes including mounting hardware and will drop right into place. Also new front and rear spring sets for the Turbo Scorpion that help to fine-tune the suspension to various track conditions. The sets are available separately and include three pairs of springs each.

View the springs sets here

April 12, 2017

Scott Robert wins RC Mania Race

The 2017 RC Mania race is a unique event as it is molded after a wrestling survivor series, two days on two different tracks, no podiums, just an overall champ of that class. The champ of course, is awarded the belt. After two rounds of qualifying Scott Robert had set TQ in both Modified 2WD buggy and Modified 4WD Buggy. In the main events Scott concentrated on making clean consistent laps and while he didn’t have the hot lap, he was able to win both A main events on the turf. This would put him in good points standings heading into the second day. After the first round of qualifying Scott Robert was TQ in Modified 4WD buggy and 4th in Modified 2WD buggy. Scott would make a few changes and take TQ in Mod 2WD buggy as well. The 4wd A main would be the first main and Scott would lead the race with a decent lead until he would hit a pipe pin on the drop down on the left side of the track breaking an arm. Scott was nursing his buggy around the track to finish second, but would retain overall champ for that class. In 2WD, Scott focused again on clean consistent laps not crashing once the whole race which gave him a cushion to drive clean and win from the start, taking the overall title.

Source: Tekin [teamtekin.com]

April 12, 2017

UFRA introduce new Swiss-made 1/8th rims

Swiss foam tyre specialists UFRA have introduced their new domestically made 1/8th on-road rims. Made in Switzerland the rims are available as part of UFRA’s pre-trued tyre line in matte black or lightweight white versions with the front wheels now also being 1mm wider than the previous ones.

View the other rims here

April 11, 2017

WRC F-One 017 1/10th formula car kit

Italian company WRC Racing have introduced the F-One 017 1/10th formula car kit. The latest incarnation of the platform features new, adjustable carbon battery stops for both the inline and transversal battery positions, it comes with a new main chassis that allows for short and long wheelbase settings by simply relocating the front end, while the rear supension assembly now allows for increased suspension travel and thus improved side bite. Last but not least come new, reinforced front lower arms that are more crash-proof than the previous parts.

View more images here

April 11, 2017

JConcepts Tru-Fit beadlock rings for Tribute wheels

JConcepts have introduced the Tru-Fit beadlock rings for the Tribute monster truck wheels. 3-D-printed and available through JConcepts’ Shapeways store the rings overlap the outside of the wheel and look scale to the 1:1 trucks. The beadlock rings are easily secured by spreading a thin layer of shoe-goo on the ring itself and pressing the ring into the outside of the wheel. The beadlock rings are offered in black, blue, red, green, yellow and orange for the ultimate matching combination for any rig.

View another image here

April 11, 2017

RDRP XB2 aluminium battery thumb nuts

Revolution Design Racing Products have introduced aluminium battery thumb nuts for Xray’s XB2 series of cars. The parts offer a larger outer diameter and deep grooves compared to the standard parts, making for exceptional grip and easier battery swaps. Machined from aircraft-grade 7075-T6 aluminium and coming orange or black anodised the nuts sport machined silver edge details and laser-etched RDRP logos for cool looks. The nuts are available in sets of two from now on and they also fit the 4WD line of Xray 1/10th off-road vehicles.

View more images here